| DC 欄位 |
值 |
語言 |
| DC.contributor | 土木工程學系 | zh_TW |
| DC.creator | 李政鴻 | zh_TW |
| DC.creator | Zheng-hong Li | en_US |
| dc.date.accessioned | 2009-7-17T07:39:07Z | |
| dc.date.available | 2009-7-17T07:39:07Z | |
| dc.date.issued | 2009 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=963202047 | |
| dc.contributor.department | 土木工程學系 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 本研究以不同醇類與丙烯酸進行酯化反應後所得之丙烯酸酯聚合物，透過使用過氧化氫純化處理，將丙烯酸酯中影響混凝土耐久性之醇類移除，探討純化後之丙烯酸酯聚合物對水泥系材料性質之影響。將純化後之丙烯酸酯分別加入水泥漿、水泥砂漿和混凝土進行基本物理試驗，評估純化後之丙烯酸酯聚合物對水泥系材料之影響。綜合評估試驗結果，丙烯酸酯聚合物經雙氧水純化處理後，在適當的配比下，對水泥材料力學性質和耐久性有適度之改質成效，其中丙烯酸和二乙二醇莫爾比為1 : 0.29，反應生成之丙烯酸二乙二酯聚合物在最佳酯化率下，添加1.0 %雙氧水純化處理後，其改質成效最為顯著。在水泥及材料新拌性質方面，純化後之丙烯酸酯隨著添加量增加，水泥系材料流動性會隨之增加；水泥漿凝結時間亦隨著雙氧水用量增加，有縮短初、終凝的現象；在硬固水泥砂漿性質方面，固定聚合物添加0.1 %時，具有最佳之成效，其抗壓強度較控制組可提高15.06~22.87 %，且抗彎和黏結強度亦較控制組優良；添加純化後之丙烯酸酯對於水泥砂漿乾縮量無明顯收縮現象。混凝土基本性質試驗結果顯示，添加純化後之丙烯酸二乙二酯，其28天抗壓強度較控制組可提高14.1 %，純化後之丙烯酸酯可延長混凝土受高溫環境下，試體強度提早折減之影響。
| zh_TW |
| dc.description.abstract | In this study, the removal of redundant alcohol of acrylate that affects concrete durability are carried out in different alcohols and acrylic acid derived from the etherification reaction of acrylic ester polymer through the use of H2O2 purification. Discussion on the impact of purified acrylic polymer to cement materials is also done. After purification by adding acrylic, basic physical property test are carried out on the cement, cement mortar, and concrete.
Comprehensive evaluation of the test results indicates that for acrylate polymer treated with H2O2 purification, the most significant modification to the concrete materials properties and durability was achieved when the Moore ratio of acrylic acid and diethyl glycol is 1:0.29; the reaction of acrylic acid and diethyl ester polymer yielded the best possible result with the addition of 1.0 % H2O2 purification treatment.
In the fresh cement mortar, the addition of purified acrylate addition to cement materials will cause an increase in mobility workability; slurry setting time will also increase with the amount of H2O2 due to the shortening of the beginning of the end of condensate phenomenon. In the hardened cement mortar with 1 % polymer addition, the compressive strength increased 15.06-22.87 % compared to the control group, the flexural bond strength is also better than the control group. The addition of purified acrylic cement mortar also prevented the occurrence of dry shrinkage. Result of testing on the basic properties of concrete shows that the addition of purified diethyl’s esters of acrylic acid increased the 28 days compressive strength by 14.1 % compared to the control group. When purified acrylic uses are extended to the higher temperature environment of concrete, the early strength of the concrete are reduced.
| en_US |
| DC.subject | 丙烯酸酯 | zh_TW |
| DC.subject | 純化 | zh_TW |
| DC.subject | 酯化反應 | zh_TW |
| DC.subject | Purify | en_US |
| DC.subject | Acrylate | en_US |
| DC.subject | Etherification reaction | en_US |
| DC.title | 不同丙烯酸酯純化後對水泥系材料性質之影響 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.title | In study on different acrylate through the use of H2O2 purification and results of cementitious materials | en_US |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |