### 博碩士論文 973203009 完整後設資料紀錄

 DC 欄位 值 語言 DC.contributor 機械工程學系 zh_TW DC.creator 古鳴倫 zh_TW DC.creator Ming-Lune Gu en_US dc.date.accessioned 2011-1-21T07:39:07Z dc.date.available 2011-1-21T07:39:07Z dc.date.issued 2011 dc.identifier.uri http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=973203009 dc.contributor.department 機械工程學系 zh_TW DC.description 國立中央大學 zh_TW DC.description National Central University en_US dc.description.abstract 修整型曲線齒輪係利用具有圓弧法向剖面且具有圓弧齒線的假想齒條刀所創成之齒輪。其特徵為齒面寬中央截面厚度較大，而齒面寬兩端厚度較小，且左右齒面外形不相同，一齒面為凹面，另一齒面為凸面。修整型曲線齒輪組在齒面寬中央為點接觸，能避免發生齒緣接觸。其優點為無軸向推力、彎矩強度較高，且因一齒面為凹面，能有利於潤滑油的殘留，故齒輪潤滑較良好。 本研究首先推導出具圓弧法向剖面齒條刀的數學模式，進而利用假想曲線齒條刀配合創成機構推導修整型曲線齒輪的齒面數學方程式。然後撰寫電腦程式進行修整型曲線齒輪之齒面接觸分析，探討刀具參數與組裝誤差對傳動誤差之影響，並且計算出接觸率。 接著以電腦輔助繪圖軟體建立齒輪組實體模型，並使用有限元素分析軟體進行修整型曲線齒輪組之接觸應力分析，探討在不同旋轉角度下的接觸應力與齒根彎矩應力的變化情況，並深入分析刀具參數對齒面接觸應力與齒根彎矩應力之影響。 最後利用五軸CNC加工機製造出修整型曲線齒輪實體模型，使用泛用型齒輪嚙合測試機進行測試，探討不同設計參數下之傳動誤差，並進行齒輪組接觸齒印測試與有限元素分析之結果相互驗證。 zh_TW dc.description.abstract Modified curvilinear gears can be generated by an imaginary rack-cutter with a circular-arc normal section. The tooth thickness of the modified curvilinear gears is larger in the central transverse section, and the left and right tooth surfaces are not symmetric. One of the tooth surfaces is concave and the other is convex. A modified curvilinear gear set has point contact and will not incur point contact under assembly errors. In this study, firstly the mathematical model of the imaginary rack cutter is developed. The mathematical model of the modified curvilinear gears was derived based on the imaginary rack cutter and the generation mechanism. Tooth contact analysis (TCA) of a modified curvilinear gear set was established to simulate the influences of design parameters and assembly errors on transmission errors. The contact ratio of the gear set was also calculated from the TCA results. The solid model of the gear set was established by computer aided design software, and finite element analysis (FEA) was performed to analyze the contact stress and root bending stress under different design parameters and different rotational angles. Finally, the modified curvilinear gears were manufactured by using a 5-Axes CNC Machining Center. Experiments of transmission errors and contact patterns were performed on a universal gear tester to verify the FEA results. en_US DC.subject 有限元素分析 zh_TW DC.subject 齒面接觸分析 zh_TW DC.subject 曲線齒輪 zh_TW DC.subject 傳動誤差 zh_TW DC.subject curvilinear gear en_US DC.subject tooth contact analysis en_US DC.subject transmission error en_US DC.subject finite element analysis en_US DC.title 具齒形修整之圓弧形曲線齒輪接觸分析 zh_TW dc.language.iso zh-TW zh-TW DC.title Tooth Contact Analysis of a Curvilinear Gear Set with Modification en_US DC.type 博碩士論文 zh_TW DC.type thesis en_US DC.publisher National Central University en_US