| DC 欄位 |
值 |
語言 |
| DC.contributor | 材料科學與工程研究所 | zh_TW |
| DC.creator | 賴志忠 | zh_TW |
| DC.creator | Chih-chung Lai | en_US |
| dc.date.accessioned | 2010-8-4T07:39:07Z | |
| dc.date.available | 2010-8-4T07:39:07Z | |
| dc.date.issued | 2010 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=973209006 | |
| dc.contributor.department | 材料科學與工程研究所 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 在過去十幾年間，由於其特別的物理性質，合成矽相關奈米結構引起廣泛研究興趣。自組裝法(self-assembly)提供了一個特殊的方法去製作奈米結構而不產生製程引起的破壞。因此，製備自組裝矽相關奈米結構得到重視。鍺/矽之間具有適當的晶格常數差異(4.2%)，為製作及探究奈米尺度異質磊晶的良好系統。最近，利用矽基底奈米線做為高效能元件或是感應偵測器被廣泛的研究。製作奈米線結構有幾個方法，如電子束微影術、氣液固成長法，以及金屬輔助化學蝕刻法。稍早的研究已經顯示出奈米球微影術提供了一個有效的方式去之奈米之製作自組裝、有序之奈米球陣列。然而，關注於利用金屬輔助化學蝕刻法製作矽鍺奈米柱陣列卻很少。本研究提出利用奈米球微影術與金屬輔助化學蝕刻法製作矽鍺奈米柱陣列。
利用掃描式電子顯微鏡觀察，矽鍺奈米柱之柱體形成細長的緊縮狀(necking body)，而非矽奈米柱直徑完全由奈米球定義的情形。藉由改變蝕刻的溫度自5℃ 至25℃，矽鍺奈米柱形貌顯示出其半徑及長度均對溫度有依存性：較高的溫度有較高的蝕刻率。推測此現象是由於溫度上升使得蝕刻反應活化能(reaction activation energy)減少之故。利用穿透式電子顯微鏡(TEM)分析矽鍺奈米柱陣列之橫截面，此奈米柱具有均勻之鍺含量15 at%；然而，在奈米柱中鍺含量減少的原因還需要更深入的研究。
經由在矽與矽鍺基板上部分區域鍍金的試片操作同樣化學蝕刻法去研究金增進基板蝕刻的效應，證明了基板蝕刻率確實會在有鍍金的區域內上升。然而，在矽與矽鍺試片上鍍金與未鍍金的接面，化學蝕刻行為卻完全不同：矽鍺試片上非陡峭(non-sharply)接面的產生是來自於試片鍍金與未鍍金區域皆均勻性蝕刻所導致。
總結以上，吾人成功利用奈米球微影術與金輔助化學蝕刻法製作矽鍺奈米柱陣列。藉由最佳化蝕刻條件，可製作筆直與均勻定義之奈米柱陣列。這對於未來應用於製作紅外線光偵測器有莫大助益。
| zh_TW |
| dc.description.abstract | Over the past few decades, the synthesis and characterization of Si-based nanostructures got much attention in research interests due to their intrinsic physical properties. There is a particular method called self-assembly which provides a possible a way to fabricate nanostructures without process induced damages. As a result, self-assembled Si-based nanostructures are of particular interests. Ge/Si has emerged as a model system for the fabrication and investigation of nanometer-scale heteroepitaxy with a moderate lattice mismatch (4.2%). The fabrication of one-dimensional SiGe nanostructure arrays is one of the most interesting topics. Recently, using Si-based nanowires as high performance devices or sensors has been extensively studied. There are several methods to fabricate nanowire structures, such as e-beam lithography and vapor-liquid-solid (VLS) growth, and metal-assisted chemical etching. Previous works have demonstrated that nanosphere lithography (NSL) provides an efficient way to fabricate self-organized, order and close-packed sphere arrays. However, there is few attention about fabrication of bulk SiGe alloy nanorod (NR) arrays by metal-assisted chemical etching. In this study, we demonstrated the fabrication of SiGe nanorods arrays by combing NSL and metal-assisted chemical etching.
The morphology of SiGe NRs shows a necking body compared to that of Si NR which is well-defined by the diameter of PS mask. One tries to understand the mechanism of formation of SiGe NR arrays. The morphologies of SiGe NR show a temperature dependence on NRs’ diameter and length by changing the etching temperatures from 5℃ to 25℃. The etching rate was found to increase with the increase of temperature. This result may result from the decrease of reaction activation energy as the increase of etching temperature. TEM analysis on cross-sectional SiGe NR arrays indicated the NRs have homogenous Ge content of 15 atom%. However, the reason for the Ge content decreasing in NR is still requied to be further study.
To investigate Au-enhanced etching behavior on Si and SiGe substrate, a chemical etching experiment on both substrate with partial Au coverage was performed. It is proved that the Au coating truly enhances the Si and SiGe etching in modified solution. The chemical etching at the interface between the Au region and non-Au region shows a different etching behavior on both substrate, the non-sharply edge on SiGe substrate is resulted from homogenously etching on the non-Au region of SiGe substrate which is not found in that of Si substrate.
In summary, the fabrication of SiGe NR arrays was achieved by combining NSL and Au-assisted chemical etching. Through optimal the etching condition, a straight and well-defined NRs’ bodies could be produced, which may useful for further application on IR-range optical sensors.
| en_US |
| DC.subject | 矽鍺 | zh_TW |
| DC.subject | 奈米柱陣列 | zh_TW |
| DC.subject | 奈米球微影術 | zh_TW |
| DC.subject | 金輔助化學蝕刻法 | zh_TW |
| DC.subject | SiGe | en_US |
| DC.subject | Nanorod arrays | en_US |
| DC.subject | Nanosphere lithography | en_US |
| DC.subject | Au-assisted chemical etching | en_US |
| DC.title | 利用奈米球微影術與金輔助化學蝕刻法形成矽鍺奈米柱陣列之研究 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.title | Study on formation of SiGe Nanorod arrays by Nanosphere Lithography & Au-assisted chemical etching | en_US |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |