博碩士論文 982203056 完整後設資料紀錄

DC 欄位 語言
DC.contributor化學學系zh_TW
DC.creator黃政智zh_TW
DC.creatorChen-Chih Huangen_US
dc.date.accessioned2011-7-25T07:39:07Z
dc.date.available2011-7-25T07:39:07Z
dc.date.issued2011
dc.identifier.urihttp://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=982203056
dc.contributor.department化學學系zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract本研究將具有溴官能基的馬來醯亞胺 (MI) 與苯乙烯 (Styrene)進行自由基聚合 (FRP) 合成交替型共聚物 (Alternating copolymers),接著利用原子轉移自由基聚合法 (ATRP) 接枝具磺酸根的單體,並且導入了雙馬來醯亞胺 (BMI) 及三馬來醯亞胺 (Tri-MI) 作為交聯劑,合成出新穎具交聯結構接枝型高分子薄膜。此系列薄膜成功的降低高溫下吸水膨潤比與尺寸變化率過高的情況,並在操作溫度 25 ℃ 下,質子傳導度平均可達 10-2 S/cm,具有成為新型燃料電池之質子交換膜的潛力。 zh_TW
dc.description.abstractThe proton-conducting graft copolymer membranes were prepared by two-step synthesis. Firstly, free radical alternating copolymerization of styrene and N-[2-(2-bromoisobutyryloxy)ethyl]maleimide (BiBEMI) gave a macroinitiator. Secondly, grafting poly(Potassium 3-sulfopropyl methacrylate) chains from the macroinitiator by ATRP. Via crosslinking with BMI and Tri-MI, the dimensional stability of the membrane was effectively improved. The membranes exhibit high conductivity of 10-2 S/cm at 25 oC、100 % RH. Particularly, one of series membrane exhibit low swelling ratio (35 % deformation) at 80 ℃、100 % RH. The results exhibit these ionomer membranes has the potential to become new type proton exchange membranes in fuel cell. en_US
DC.subject質子交換膜zh_TW
DC.subjectProton conducting membraneen_US
DC.title具交聯結構之苯乙烯-馬來醯亞胺 接枝型高分子質子傳導膜之開發與製備zh_TW
dc.language.isozh-TWzh-TW
DC.titleProton conducting poly(BiBEMI-co-Styrene) graft polymer membrane en_US
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明