| DC 欄位 |
值 |
語言 |
| DC.contributor | 電機工程學系 | zh_TW |
| DC.creator | 羅欣瑜 | zh_TW |
| DC.creator | Hsin-yu Luo | en_US |
| dc.date.accessioned | 2011-8-18T07:39:07Z | |
| dc.date.available | 2011-8-18T07:39:07Z | |
| dc.date.issued | 2011 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=985201030 | |
| dc.contributor.department | 電機工程學系 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 近年來積體電路發展趨向微小化及多樣化，因此在系統晶片上有各種不同電路，電源轉換器也包括在內。本論文提出一套直流對直流降壓轉換器自動化合成流程，可以支援兩種不同的架構，包含切換式降壓轉換器（Buck Converter）及線性低壓降穩壓器（Linear Low Dropout Voltage Regulator, LDO），此兩種轉換電路皆包含補償的控制電路（Control Circuit），而補償元件面積能夠達到最小值。
使用者只須在工具界面上選取轉換器架構，並輸入規格需要之規格，例如輸入電壓、輸出電壓等等，合成工具會自動產生合適的參數，與HSpice所需的模擬檔，以進行後續的電路模擬，驗證設計結果與規格是否相符，若不符合規格，合成工具會自動調整輸入參數，並重新跑一次合成程序，在切換式降壓轉換器中，主要判斷的是效率；而在線性低壓降轉換器中，判斷的規格是線性調節度與負載調節度。整個轉換器的合成流程已經以工具命令語言（Tool Command Language, Tcl）整合，可以在Linux作業系統上執行。由合成範例可看出，產生的電路皆能夠符合規格。
| zh_TW |
| dc.description.abstract | Recent trend of integrated circuit design requires miniaturization as well as diversification. As such, the IC contains different kinds of circuits on a whole chip including power converters. This work proposes an automatic synthesis flow for DC-DC step-down converters. The converter architectures of a switcher DC-DC step-down converter（buck converter） and a linear low dropout voltage regulator（LDO） are both supported in the flow with complete control circuits. Moreover, the area of compensation circuits is minimized.
Users can select topology of converter and input specifications of converters in the proposed synthesis tool, like input voltage, output voltage, etc. Then the synthesis tool will automatically generate proper design parameters and corresponding design netlist. The netlist is then simulated with HSpice to verify the implementation results with specifications. If the required specifications are not achieved, the tool will adjust the input parameters and re-run the synthesis procedure actomatically. For buck converters, the primary concern is the efficiency. For LDO circuits, the primary concerns are the line regulation and load regulation. This proposed synthesis flow has been integrated with the tool command language（tcl） on Linux platform. As demonstrated on the circuit examples, all the generated circuits can meet the required specifications.
| en_US |
| DC.subject | 自動化合成流程 | zh_TW |
| DC.subject | 線性低壓降穩壓器 | zh_TW |
| DC.subject | 切換式降壓轉換器 | zh_TW |
| DC.subject | automatic synthesis flow | en_US |
| DC.subject | LDO | en_US |
| DC.subject | buck converter | en_US |
| DC.title | 直流對直流降壓轉換器自動化合成流程 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.title | Automatic Synthesis Flow of DC to DC Step-Down Converter Circuits | en_US |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |