博碩士論文 86343016 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:8 、訪客IP:54.211.135.32
姓名 許芳勳( Fang-Shyun Hsu)  查詢紙本館藏   畢業系所 機械工程學系
論文名稱 動態可靠度模型之探討及其應用
(The study of dynamic reliability models and applications)
相關論文
★ 非等強度分負荷系統之動態負載配置研究★ 倒傳遞類神經網路學習收斂之初步探討
★ 材料強度退化與累積損傷之探討★ 累積失效與可靠度關係之探討
★ 碳鋼材料在二氧化硫環境下之腐蝕可靠度行為之探討★ 多目標量子搜尋之參數調控演算法
★ 低通濾波器設計可靠度分析★ 光纖材料之靜力疲勞可靠度分析
★ 競爭策略於系統行為之探討★ 應用動態可靠度模型預估電解電容器壽命之探討
★ 有限平板多條邊裂紋成長之探討★ 厚度或折射率變異對窄帶通濾光片之可靠度分析
★ 馬可夫過程的預防維護模型之研究★ 馬可夫過程在技術成長上之研究
★ 應用馬可夫預防維護模型於維修保養策略之探討★ 簡灰法之研究與應用
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   [檢視]  [下載]
  1. 本電子論文使用權限為同意立即開放。
  2. 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
  3. 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。

關鍵字(中) ★ 可靠度
★ 損傷累積
★ 蒙地卡羅模擬
★ 模糊
★ 修理
★ 壽命
★ 浴缸形曲線
關鍵字(英) ★ reliability
★ damage cumulation
★ Monte Carlo simulation
論文目次 封面
摘要
目錄
圖目錄
表目錄
符號說明
第一章、緒論
1.1 研究動機
1.2 文獻回顧
1.3 論文架構
第二章、動態可靠度模型
2.1 動態可靠度模式之建立
2.2 數據分析與模型嵌合
2.3 實例驗證
2.4 壽命預估之應用
2.5 維修效應之穩定性分析
第三章、材料強度退化與累積失效的關係
3.1 複合材料之強度退化
3.2 蒙地卡羅模擬法
3.3 模擬結果分析
3.4 分析結果之應用
第四章、修理行為對失效機制的探討
4.1 模糊數學應用於處理不完整失效記錄
4.2 公共汽車引擎實例應用
4.3 動態可靠度分析
第五章、結論
5.1 動態可靠度模型
5.2 材料強度退化與累積失效的關係
5.3 修理行為對失效機制的探討
5.4 後續研究之建議
參考文獻
附錄
參考文獻 [1].F. S. Hsu & K. S. Wang, “Algorithm for Evaluation of Second Moment Reliability Index,” Journal of the CSME, Vol.11, No.2, pp.185-191, 1990.
[2].K. S. Wang & F. S. Hsu, “Optimal Selection of Standard Deviation of Design Variables Based on Reliability Requirement,” Reliability Engineering and System Safety, Vol.33, pp.177-188, 1991.
[3].許芳勳,”可靠度設計應用於標準差選取之最佳化研究”,國立中央大學碩士論文,1990.
[4].黃舉錐,”非等強度分負荷系統負載調整方案之研究”, 國立中央大學博士論文,1998.
[5].蔡有藤,”系統預防維護作業之研究” , 國立中央大學博士論文,1999.
[6].L. J. Bain, “Analysis of linear failure rate life testing distributions,” Technometrics, 16, pp.551-560, 1974.
[7].M. L. Shooman, “Probabilistic Reliability: An Engineering Approach,” McGraw-Hill, Inc., 1968.
[8].D. P. Gaver & M. Acar, “Analytical hazard representation for use in reliability, mortality and simulation studies,” Communications in Statistics-Simulation and Computation, B8(2), pp.91-111, 1979.
[9].J. F. Lawless, “Statistical Models and Methods for Lifetime Data,” JOHN WILEY & SONS, Inc., 1982.
[10].L. R. Jaisingh, W. J. Kolarik, and D. K. Dey, “A Flexible Bathtub Hazard Model for Non-repairable Systems with Uncensored Data,” Microelectronic Reliability, Vol. 27, No. 1, pp.87-103, 1987.
[11].U. Hjorth, “A Reliability Distribution With Increasing, Decreasing, Constant and Bathtub-Shaped Failure Rates, ” Technometrics, Vol. 22, No. 1, pp.99-107, Feb. 1980.
[12].R. M. Smith and L. J. Bain, “An Exponential Power Life-testing Distribution,” Communications in Statistics, Vol. 4, No. 5, pp.469-481, 1975.
[13].B. S. Dhillon, “Life Distributions,” IEEE Transactions on Reliability, Vol. R-30, pp.457-459, 1981.
[14].E. Haupt and H. Schabe, “A new Model for a Lifetime Distribution with Bathtub Shaped Failure Rate,” Microelectronic Reliability, Vol. 32, No. 5, pp.633-639, 1992.
[15].H. Schabe, “Constructing Lifetime Distributions with Bathtub Shaped Failure Rate from DFR Distributions,” Microelectronic Reliability, Vol. 34, No. 9, pp.1501-1508, 1994.
[16].T. W. Calvin, “Modeling the Bathtub Curve,” Proceedings of Annual Reliability and Maintainability Symposium, 1973.
[17].M. Xie & C. D. Lai, “Reliability analysis using an additive Weibull model with bathtub-shaped failure rate function,” Reliability Engineering and System Safety, Vol.52, pp.87-93, 1996.
[18].林冠甫,”新產品動態可靠度的預估”, 國立中央大學碩士論文,1991.
[19].K. S. Wang, E. H. Wan & W. G. Yang, “A preliminary investigation of new mechanical product development based on reliability theory,” Reliability Engineering and System Safety, Vol.40, pp.187-194, 1993.
[20].許金竹,”預防更換對機械系統動態可靠度影響之研究” , 國立中央大學碩士論文,1993.
[21].王培戎,”機電系統失效與動態可靠度之研究” , 國立中央大學碩士論文,1993.
[22].K. S. Wang, E. H. Wan, “Reliability Consideration of Flexible Manufacturing System from Fuzzy Information,” International Journal of Quality and Reliability Management, Vol.10, pp.187-194, 1993.
[23].萬英豪,”彈性製造系統可靠度在模糊資訊中之預測及改進研究” , 國立中央大學博士論文,1993.
[24].楊萬騏,”機件硬化層動態可靠度退化模式之探討”, 國立中央大學碩士論文,1993.
[25].K. S. Wang, C. S. Chen & J. J. Huang, “Dynamic Reliability Behavior for Sliding Wear of Carburized steel,” Reliability Engineering and System Safety, Vol.58, pp.31-41, 1997.
[26].K. S. Wang, S. T. Chang & Y. C. Shen, “Dynamic Reliability Models for Fatigue Crack Growth Problem,” Engineering Fracture Mechanics, Vol.54, No.4, pp.543-556, 1996.
[27].K. S. Wang, H. J. Po, “The Relationship Between Life and Value of Machine Based on Thermodynamics Analogy,” The Chinese Journal of Mechanics, Vol.12, No.4, pp.503-512, 1996.
[28].王國雄,”系統演變與力學分析架構的類比”,第二十屆全國力學會議論文集(邀請演講),台灣台北,Ⅷ-XV,1997.
[29].王碩銘,”潛變-破裂動態可靠度退化模式之探討”, 國立中央大學碩士論文,1994.
[30].王國雄、沈盈志、陳穎佳、陳挹民,”以 S-N 曲線探討機件疲勞可靠度之退化模式“,中華民國力學學刊,第12卷,第4期,pp.525-534,1996.
[31].K. S. Wang, Y. C. Shen and J. J. Huang, "Loading Adjustment for Fatigue Problem Based on Reliability Consideration", International Journal of Fatigue, Vol.19, No.10, pp.693-702, 1997.
[32].王國雄、沈盈志、許芳勳, ”具平均應力金屬疲勞壽限預估模式之探討",中華民國力學期刊,第13卷,第3期,pp.245-254,1997.
[33].沈盈志, ”金屬材料疲勞累積效應與可靠度關係之探討”, 國立中央大學博士論文,1997.
[34].林維新, ”車削精度與刀具磨耗可靠度研究”, 國立中央大學博士論文,1999.
[35].K. S. Wang, W. S. Lin., and F. S. Hsu, “A new Approach for determing the Reliability of Cutting Tool,” International Journal of Advanced Manufacturing Technology, Vol.17, No.10, pp.705-709, 2001.
[36].林江龍,”放電加工電極消耗可靠度與製程參數最佳化研究”, 國立中央大學博士論文,1999.
[37].張豪麟,”系統動態可靠度與其失效率關係的探討”,國立中央大學碩士論文,1999.
[38].王國雄、許芳勳、張豪麟,”系統損傷累積與可靠度關係的探討”, 中華民國力學期刊, 第16卷,第2期,pp.131-139,2000.
[39].廖健隆,”碳鋼材料在二氧化硫環境下之腐蝕可靠度行為之探討”, 國立中央大學碩士論文,2000.
[40].K. S. Wang, F. S. Hsu & P. P. Liu, “Modeling the Bathtub Shape Hazard Rate Function in Terms of Reliability,” submitted to Reliability Engineering and System Safety, 2000.
[41].Leah Edelstein-Keshet, “Mathematical Models in Biology,” Random House, Inc., New York, 1988.
[42].K. S. Wang, J. J. Huang and Y. F. Lee, “Alternative Selection for Mechanical Design Based on Manufacturability Assessment — The Application of IERA and Grey Analysis,” Journal of The Chinese Fuzzy Systems Association, Vol.4, No.2, pp.15-27, 1998.
[43].K. C. Kapur and L. R. Lamberson, “Reliability in Engineering Design,” Jone Wiley & Sons, Inc., New York, 1977.
[44].王秉剛,”汽車可靠性工程方法”,機械工業出版社,北京,1991.
[45].E. A. Elsayed, “Reliability Engineering,” Addison Welsley Longman, Inc., Massachusetts, p.36, 1996.
[46].B. Geniaux, “ESS at final assembly level actual result —optimization method,” The Journal of Environmental Science, Vol.31, No.1, 1988.
[47].S. S. Rao, “Reliability-Based Design,” McGraw-Hill, Inc., New York, p.155, 1992.
[48].K. S. Wang, J. J. Huang, Y. T. Tsai, F. S. Hsu, “Study of loading policies for unequal strength shared-load system”, Reliability Engineering And System Safety, Vol. 67, pp. 119-128, February 2000.
[49].ISO, “Tool life testing with single-point turning tools,” 5th draft proposal, ISO/TC29/WG22 (Secretariat 37) 91, March 1972.
[50].J. N. Yang, “Residual Strength Degradation Model and Theory of Periodic Proof Tests for Graphite/Epoxy Laminates,” Journal of Composite Materials, Vol.11, pp.176-203, 1977.
[51].P. C. Chou and R. Croman, “Residual Strength in Fatigue Based on the Strength-Life Equal Rank Assumption,” Journal of Composite Materials, Vol.12, pp.177-194, 1978.
[52].T. Tanimoto and H. Ishikawa, “Statistical Characterization of Residual Strength Degradation for Laminated GRP Materials Under Various Cyclic Loading Conditions,” Proceedings of the 4th International Conference on Structural Safety and Reliability, Vol. I, P.415-424, 1985.
[53].凌樹森, ”可靠性在機械強度設計和壽命估計中的應用,” 宇航出版社, 北京, 1988.
[54].H. T. Hahn and R. Y. Kim, “Proof testing of Composite Materials,” Journal of Composite Materials, Vol.9, pp.297-311, 1975.
[55].J. N. Yang, “Fatigue and Residual Strength Degradation for Graphite/Epoxy Composites Under Tension-Compression Cyclic Loadings,” Journal of Composite Materials, Vol.12, pp.19-39, 1978.
[56].J. C. Halpin, K. L. Jerina, and T. A. Johnson, “Characterization of Composites for the Purpose of Reliability Evaluation,” Analysis of Test Methods for High Modulus Fibers and Composites, ASTM STP 521, American Society for Testing and Materials, pp.5-64, 1973.
[57].G. P. Sendeckyj, "Fitting Models to Composite Materials Fatigue Data", Test Methods and Design Allowables for Fibrous composites. ASTM STP 734, C. C. Chamis, Ed., American Society for Testing and Materials, pp.245-260, 1981.
[58].J. N. Siddall, “Probabilistic Engineering Design Principles and Applications,” Marcel Dekker, Inc., New York, 1983.
[59].梁伯任,”材料強度退化與累積損傷之探討”, 國立中央大學碩士論文,2000.
[60].石逸群,”累積失效與可靠度關係之探討”, 國立中央大學碩士論文,2000.
[61].王國雄,”從妥善率觀點架構系統操作管理及同步工程作業”,國科會專題研究計畫書,1999.
[62].J. L. Coetzee, “The role of NHPP model in the practical analysis of maintenance failure data,” Reliability Engineering and System Safety, Vol.56, pp.161-168, 1997.
[63].S. Martorell, A. Sanchez, V. Serradell, “Age-dependent reliability model considering effects of maintenance and working conditions,” Reliability Engineering and System Safety, Vol.64, pp.19-31, 1999.
[64].D. J. Davis, “An analysis of some failure data,” Journal of the American Statistical Association, Vol.47, pp.113-150, 1952.
[65].T. Terano, K. Asai, M. Sugeno, “Fuzzy Systems Theory and its Applications,” Academic Press, Inc., CA, 1987.
[66].M. M. Bourke, D. G. Fisher, “Calculation and application of a minimum fuzzy relational matrix,” Fuzzy Sets and Systems, 74 (1995) 225-236.
[67].區奕勤,張先迪,”模糊數學原理及應用”,儒林圖書公司,1991.
[68].K. Arnold & M. M. Gupt, “Introduction to fuzzy arithmetic theory and applications,” Van Nostrand Reinhold Co., New York, 1991.
[69].P Paris and F. Erdogan, “A Critical Analysis of Crack Propagation Laws,” Journal of Basic Engineering Transactions ASME, Series D, V.58, No.4, pp.528-534, 1963.
指導教授 王國雄(Kuo-Shong Wang) 審核日期 2001-6-26
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明