多晶矽阻擋層阻擋離子佈植雜質之研究

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：104

、訪客IP：18.117.232.108

姓名

范哲銘(ju-ming Fan) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

多晶矽阻擋層阻擋離子佈植雜質之研究
(nono)

相關論文

★ 塑膠機殼內部表面處理對電磁波干擾防護研究	★ 研磨頭氣壓分配在化學機械研磨晶圓膜厚移除製程上之影響
★ 利用光導效應改善非接觸式電容位移感測器測厚儀之研究	★ 石墨材料時變劣化微結構分析
★ 半導體黃光製程中六甲基二矽氮烷之數量對顯影後圖型之影響	★ 可程式控制器機構設計之流程研究
★ 伺服沖床運動曲線與金屬板材成型關聯性分析	★ 鋁合金7003與630不銹鋼異質金屬雷射銲接研究
★ 應用銲針尺寸與線徑之推算進行銲線製程第二銲點參數優化與統一之研究	★ 複合式類神經網路預測貨櫃船主機油耗
★ 熱力微照射製作絕緣層矽晶材料之研究	★ 微波活化對被植入於矽中之氫離子之研究
★ 矽/石英晶圓鍵合之研究	★ 奈米尺度薄膜轉移技術
★ 光能切離矽薄膜之研究	★ 氮矽基鍵合之研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

在半導體產業中，SOI的發展解決了傳統矽材的問題，提昇了固態元件的效率和降低能量損耗，而通常是利用智切法來製作SOI材料。在智切法的步驟中，我們將離子佈植的步驟，改用Ion Shower設備來替代一般的Ion Beam，發現了共同佈植而造成雜質一起植入矽晶圓的問題。
　　本研究目的在於，利用Ion Shower設備來進行氫離子佈植。實驗過程中因為此設備無質譜儀，所以佈植時將不同的元素共同佈植進入了矽材裡。為了避免共同佈植，我們在晶圓上沉積了一層多晶矽層，利用此結構來阻擋氫以外的元素進入矽層裡。之後再以CMP的方式把多晶矽層移除。

摘要(英)

In the semiconductor industry, the development of silicon on insulator (SOI) solves the happened problems, and improves the efficiency of solid state devices and reduces the loss of energy.It is usually using Smart-Cut to produce SOI.In Smart-Cut steps, The ion implantation step to switch the Ion Shower devices to replace the Ion Beam, found the co-implanted with impurities implanted silicon wafer.
　　This study is about the Ion Shower devices to hydrogen ion implantation. No mass spectrometer during the experiment in this devices, implant the different elements co-implanted into the silicon wafer.In order to avoid co-implanted,layer of polysilicon layer is deposited on the wafer, with this structure to the barrier element other than hydrogen into the silicon layer inside. After polysilicon layer removed by CMP.

關鍵字(中)

★ 多晶矽
★ 阻擋

關鍵字(英)

論文目次

摘要 ................................ ..................... I
AbstractAbstractAbstractAbstractAbstractAbstractAbstractAbstract ................................ ................ II
致謝 ................................ ................... IIIIIIIII
目錄 ................................ .................... IV
圖目錄 ................................ .................. VI
表目錄 ................................ ................ VIIIVIIIVIIIVIII
第一章緒論第一章緒論 ................................ ............... 1
1.11.11.1研究背景 ................................ .......... 1
1.21.21.2研究動機 ................................ .......... 3
第二章文獻回顧文獻回顧 ................................ ......... 8
2-1離子佈植技術離子佈植技術 ................................ ...... 8
2-1-1 離子佈植的基本理論 .............................. 8
2-1-2 離子佈植造成的矽基材損傷[34,35] ................... 10
2-2氫離子佈植之薄膜轉移氫離子佈植之薄膜轉移氫離子佈植之薄膜轉移 ............................. 11
2-3氫在半導體晶圓之現象氫在半導體晶圓之現象氫在半導體晶圓之現象 ............................. 12
2-4半導體晶圓鍵合技術（半導體晶圓鍵合技術（半導體晶圓鍵合技術（ Wafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding TechnologyWafer Bonding Technology） ... 14
2-5 智切法 (Smart(Smart(Smart(Smart(Smart(Smart-CutCutCut®)[9][10][27] .......................... 15
V
第三章實驗準備與研究步驟實驗準備與研究步驟實驗準備與研究步驟 .............................. 21
3-1 實驗目的 ................................ ......... 21
3-2 研究步驟與方法研究步驟與方法研究步驟與方法 ................................ ... 21
第四章結果與討論結果與討論 ................................ ....... 30
4-1氫離子佈植影響氫離子佈植影響 ................................ ... 30
4-2 雜質的形成與阻擋雜質的形成與阻擋雜質的形成與阻擋 ................................ . 31
4-3多晶矽層移除多晶矽層移除 ................................ ..... 32
第五章結論 ................................ ............. 40
5-1 結論 ................................ ............ 40
參考文獻 ................................ ............. 41

參考文獻

參考文獻
【1】 Jack St. Clair Kilby,“Turning Potential into Realities: The Invention of the Integrated Circuit (Nobel Lecture)”, WILEY-VCH-Verlag GmbH, Vol. 2, Issue: 8-9, pp. 482–489, (2001)
【2】 P. K. Bondyopadhyay, “Moore’s law governs the silicon revolution”, IEEE, Vol. 86, Issue: 1, pp. 78-81, (1998).
【3】 N. Weste and K. Eshraghian, “Principles of CMOS VU1 Design, A Systems Perspective”, Reading, MA: Addison-Wesley Publishing Company, (1993).
【4】 R. H. Dennard et al., “Design of ion-implanted MOSFET’s with very small physical dimensions”, IEEE, J. Solid-State Circuits, vol. SC-9, p. 256,(1974).
【5】莊達人，VLSI 製造技術，五版，高立圖書有限公司，臺北縣，民國九十一年。
【6】 G. K. Celler and S. Cristoloveanu, “Frontiers of Silicon-on-Insulator”, Journal of Applied Physics, Vol. 93, Issue 9, pp. 4955-4978,(May 2003).
【7】 J. B. Kuo and K.-W. Su, “CMOS VLSI Engineering: Silicon-on-Insulator (SOI)”, Kluwer Academic Publishers, Boston, (1998).
【8】 J.-P. Colinge, “Silicon-on-Insulator Technology: Materials to VLSI, 3rd Edition”, Springer Science+Business Media, Inc., New York, (2004).
【9】 M. Bruel, “Silicon on insulator material technology”. Electronics Letters, Vol. 31, Issue 14, pp. 1201-1202, (1995).
【10】 Q.-Y. Tong and U. Gösele, “Semiconductor Wafer Bonding: Science and Technology”, John Wiley＆Sons, Inc., New York, (1999).
【11】 J. B. Lasky et al., “Silicon-on-Insulator （SOI） by Bonding and Etch-Back”, Electron Devices Meeting, 1985 International, Vol. 31, pp. 684-687, (1985).
【12】 N. M. Johnson, et al., “Defects in single-crystal silicon induced by hydrogenation”, Phys. Rev. B, 35(8), 4166 (1987).
【13】 J. K. G. Panitz, D. J. Sharp and C. R. Hills, “Near-surface microstructural modifications in low energy hydrogen ion bombarded silicon”, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 3(1), 1 (1985).
【14】 S. Romani and J. H. Evans, “Platelet defects in hydrogen implanted silicon”, Nuclear Instruments and Methods in Physics Research Section B, 44(3), 313 (1990).
【15】 T. Höchbauer, “On the Mechanisms of Hydrogen Implantation Induced Silicon Surface Layer Cleavage”, Marburg University, Ph.D. Dissertation, 2001.
【16】 I. Radu, “Layer transfer of semiconductors and complex oxides by helium and/or hydrogen implantation and wafer bonding”, Martin Luther University, Ph.D. Dissertation (2003).
【17】 J. Grisolia, G. Ben, Assayag, A. Claverie, B. Aspar, C. Lagahe, and L. Laanab, “A transmission electron microscopy quantitative study ofthe growth kinetics of H platelets in Si” Appl. Phys. Lett., 76, 852 (2000).
【18】 C. H. Seager and D. S. Ginley, “Studies of the hydrogen passivation of silicon grain boundaries”, J. Appl. Phys., 52(2), 1050 (1981).
【19】 D. S. Ginley and D. M. Haaland, “Observation of grain boundary hydrogen in polycrystalline silicon with Fourier transform infrared spectroscopy”, Appl. Phys. Lett., 39(3), 271 (1981).
【20】 S. Romani and J. H. Evans, “Platelet defects in hydrogen implanted silicon”, Nuclear Instruments and Methods in Physics Research Section B, 44(3), 313 (1990).
【21】 G. F. Cerofolini, et al., “Hydrogen-related complexes as the stressing species in high-fluence, hydrogen-implanted, single-crystal silicon”, Phys. Rev. B, 46(4), 2061 (1992).
【22】 M. Gao, et al., “A transmission electron microscopy study of microstructural defects in proton implanted silicon”, J. Appl. Phys., 80(8), 4767 (1996).
【23】 C. G. Van de Walle, et al., “Theory of hydrogen diffusion and reactions in crystalline silicon”, Phys. Rev. B, 39(15), 10791(1989).
【24】 K. J. Chang and D. J. Chadi, “Hydrogen bonding and diffusion in crystalline silicon”, Phys. Rev. B, 40(17), 11644 (1989).
【25】 T. Hara, et al., “H+ implantation in Si for the void cut SOI manufacturing”, Proc. Ion Implantation Technology International Conference, 45 (1996).
【26】 Bo Chen, “Mechanisms of layer-transfer related to silicon-on-insulator structures”, New Jersey Institute of Technology, Ph.D. Dissertation (2004).
【27】 T.-H. Lee, “Semiconductor thin film transfer by wafer bonding and advanced ion implantation layer splitting technologies”, Duke University, Ph.D. Dissertation (1998).
【28】 J. T. Borenstein, J. W. Corbett, and S. J. Pearton, “kinetic model for hydrogen reactions in boron-doped silicon”, Journal of Applied Physics, Vol. 73, pp. 2751-2754, 1993.
【29】 Q.-Y. Tong et al.,“A“smarter-cut” approach to low temperature silicon layer transfer”, Journal of Applied Physics, Vol. 72, 1998.
【30】 G. Gawlika, R. Ratajczak, A. Turos, J. Jagielski, S. Bedell, and W. L. Lanford, “Hydrogen-ionimplantation in GaAs”, Vaccum, Vol. 63, pp. 697-700, 2001.
【31】 Badih El-Kareh, Fundamentals of semiconductor processing technologies, Ch. 6 Ion-Implantation, 353.
【32】 S. M. Sze, VLSI Technology, Ch. 7 Ion-Implantation, pp.327.
【33】 J. Lindhard, M. Scharff, and H. Schiott, “Rang concepts and heavy ion ranges”, Mat. Fys. Med. Dan. Vid Selsk, 33(14), 1 (1964).
【34】 Lourdes Pelaz, et al., “Monte carlo modeling of amorhpization resulting from ion implantation in Si,” Computational Materials Science, 27,1 (2003).
【35】 James Ziegler, et al., Ion Implantation Science and Technology, Ion Implantation Technology Inc., 2008.
【36】 M. J. P. Gopstaken, et al., “Effect of crystalline regrowth on dopanr profiles in preamorphized silicon,” Applied Surface Science, 231-232, 688 (2004).
【37】 H. Xiao著，U半導體製程技術導論U，羅正忠和張鼎張譯，二版，臺灣培生教育出版，臺北市，民國九十三年。
【38】 Q.-Y. Tong and U. Gösele, USemiconductor Wafer Bonding: Science and TechnologyU, John Wiley＆Sons, Inc., New York, 1999.
【39】 J.Lindhard，M.Scharff and H.E.Schiot，Mat. Fys. Medd. Dan.Vid.Selsk，33(14) (1963)。
【40】 Jong-Man Kim, Huck Lim, Do-Young Kim, Ji-Sim Jung, Jang-Yeon Kwon and Takashi Noguchi Samsung Advanced Institute of Technology, Kyunggi 440-712,Journal of the Korean Physical Society, Vol. 48, pp. S51_S54, January 2006
【41】國立中山大學楊叢印先生民國 92 年 8 月之博士畢業論文
【42】 Q.-Y. Tong and U. Gösele, USemiconductor Wafer Bonding: Science and TechnologyU, John Wiley＆Sons, Inc., New York, 1999.

指導教授

李天錫

審核日期

2013-6-24

推文