博碩士論文 100521108 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:61 、訪客IP:18.206.194.83
姓名 林瑞祥( Jui-Hsiang Lin)  查詢紙本館藏   畢業系所 電機工程學系
論文名稱 基於使用半集總共振器設計多頻帶通濾波器與四工器
(Design of Multi-Band Bandpass Filter and Quadruplexer Based on Using Semi-Lumped Resonator)
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   [檢視]  [下載]
  1. 本電子論文使用權限為同意立即開放。
  2. 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
  3. 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。

摘要(中) 在本論文中之多頻帶通濾波器(四頻帶通濾波器:f1:1 GHz, FBW1:3%, |S21| =2.7 dB; f2:1.5 GHz, FBW2:2.1%, |S21| =2.3 dB; f3:1.93 GHz, FBW3:1.1%, |S21| = 3.9 dB; f4:2.15 GHz, FBW4:0.9%, |S21| = 4 dB)、(五頻帶通濾波器:f1:1 GHz, FBW1:3%, |S21| = 2.7 dB; f2:1.4 GHz, FBW2:2.7%, |S21| = 3.2 dB; f3:1.8 GHz, FBW3:1.9%, |S21| = 3.3 dB; f4:2 GHz, FBW4:2.2%, |S21| = 3 dB; f5:2.2 GHz, FBW5:2%, |S21| = 2.8 dB)、(六頻帶通濾波器:f1:0.8 GHz, FBW1:2.3%, |S21| = 2.9 dB; f2:1.2 GHz, FBW2:2.9%, |S21| = 2.34 dB; f3:1.4 GHz, FBW3:3.3%, |S21| = 2.59 dB; f4:1.8 GHz, FBW4:3.2%, |S21| = 2.24 dB; f5:2.2 GHz, FBW5:2%, |S21| = 2.67 dB, f6:2.5 GHz, FBW6:2%, |S21| = 2.64 dB)與四工器(f1:1.1 GHz, FBW1:2.3%, |S21| =3.1 dB; f2:1.4 GHz, FBW2:2.1%, |S21| =3.4 dB; f3:1.7 GHz, FBW3:2%, |S21| = 3.1 dB; f4:2 GHz, FBW4:2%, |S21| = 2.35 dB)使用半集總共振器(Semi-Lumped Resonator)所設計。因為分佈式耦合饋入技術所具有之低負載效應,因此不需要使用任何匹配網路用來設計多頻帶之電路。每一個通帶都是由一對共振器所控制,能夠增加設計上的自由度,而且使用分佈式耦合技術降低頻帶之間之負載效應,即可將多個通帶整合在一起。另外,由於使用source-and-load coupling的方式,它可以製造多重路徑與產生傳輸零點以提升通帶之選擇度。
最後,在本論文中以實作的方式之驗證設計電路的方法是正確的。
摘要(英) Semi-lumped resonators are used to design multi-band bandpass filters (Quad-band BPF:f1:1 GHz, FBW1:3%, |S21| =2.7 dB; f2:1.5 GHz, FBW2:2.1%, |S21| =2.3 dB; f3:1.93 GHz, FBW3:1.1%, |S21| = 3.9 dB; f4:2.15 GHz, FBW4:0.9%, |S21| = 4 dB), (Quint-band BPF:f1:1 GHz, FBW1:3%, |S21| = 2.7 dB; f2:1.4 GHz, FBW2:2.7%, |S21| = 3.2 dB; f3:1.8 GHz, FBW3:1.9%, |S21| = 3.3 dB; f4:2 GHz, FBW4:2.2%, |S21| = 3 dB; f5:2.2 GHz, FBW5:2%, |S21| = 2.8 dB), (Sext-band BPF:f1:0.8 GHz, FBW1:2.3%, |S21| = 2.9 dB; f2:1.2 GHz, FBW2:2.9%, |S21| = 2.34 dB; f3:1.4 GHz, FBW3:3.3%, |S21| = 2.59 dB; f4:1.8 GHz, FBW4:3.2%, |S21| = 2.24 dB; f5:2.2 GHz, FBW5:2%, |S21| = 2.67 dB, f6:2.5 GHz, FBW6:2%, |S21| = 2.64 dB) and quadruplexer (f1:1.1 GHz, FBW1:2.3%, |S21| =3.1 dB; f2:1.4 GHz, FBW2:2.1%, |S21| =3.4 dB; f3:1.7 GHz, FBW3:2%, |S21| = 3.1 dB; f4:2 GHz, FBW4:2%, |S21| = 2.35 dB) in this thesis. Because of distributed coupling technique generate low loading effect, the proposed circuits acquired multi-channels without the need of any matching network. Each passband govern by a respective pair of resonators are able to manipulate each passband to add design freedom, and mutli-band BPFs are integrated by employ distributed coupling technique to decrease channel-to-channel loading effect. On the other hand, Due to the method of utilizing source-and-load coupling, the proposed circuit can produce mutli-route and generate transmission zeros for enhanced passband selectively.
Finally, to validate the design method, theory and experiment are displayed as well as compared in this thesis.
關鍵字(中) ★ 多頻帶通濾波器
★ 四工器
★ 半集總共振器
關鍵字(英)
論文目次 摘要 ... I
ABSTRACT..II
致謝 . III
目錄 ...IV
圖目錄 ..VI
表目錄 ... ...X
第一章 緒論 . .. .. 1
1-1 研究動機 ... .1
1-2 文獻回顧 2
1-3 章節介紹 8
第二章 半波長共振器 基於使用集總的分析 . ... 9
2-1 簡介 9
2-2 半波長共振器基於使用集總 共振器 設計與實現 的基本 原理 9
2-3半波長共振器基於使用集總與均勻阻抗的比較分 析11
2-4半波長共振器基於使用集總與步階式阻抗的比較分析 18
2-5半波長共振器基於使用集總其微帶線度為固定值之分析 .23
2-6半波長共振器基於使用集總其中心頻率為固定值之分析 ….25
2-7半波長共振器基於使用集總其 饋入方式 之分析 27
第三章 半波長共振器基於使用集總設計多頻 帶通濾波器 .29
3-1四頻帶通濾波 器使用半波長 之半集總 共振器 設計30
3-1.1 四頻帶通濾波 器的設計理論 .. . 30
3-1.2 模擬與量測結果 ... 35
3-2五頻帶通濾波 器使用半波長 之半集總 共振器 設計..38
3-2.1 五頻帶通濾波 器的設計理論 ... 38
3-2.2 模擬與量測結果 ... 43
3-3六頻帶通濾波 器使用半波長 之半集總 共振器 設計...46
3-3.1 六頻帶通濾波 器的設計理論 ... 46
3-3.2 模擬與量測結果 ... 51
3-4設計心得 ..54
第四章 半波長共振器基於使用集總設計四工 器.. .57
4-1四工器使用半波長 之半集總 共振器 設計.58
4-1.1 四工器的設計理論 . 58
4-1.2 模擬與量測結果 ... 63
4-2 設計心得 .. ... .66
第五章 結論 ...69
第六章 未來展望 70
參考文獻 ..71
附錄 -論文中所使用的電感 Q值.77
參考文獻 [1] P. Mondal and M. K. Mandal, “Design of dual-band bandpass filters using stub-loaded open-loop resonators,” IEEE Trans. Microw. Theory Tech., vol. 56, no. 1, pp. 150–155, Jan. 2008.
[2] X.-Y. Zhang, J.-X. Chen, Q. Xue, and S.-M. Li, “Dual-band bandpass filters using stub-loaded resonators,” IEEE Microw. Wireless Compon. Lett., vol. 17, no. 8, pp. 583–585, Aug. 2007.
[3] J.-T. Kuo and H.-P. Lin, “Dual-band bandpass filter with improved performance in extended upper rejection band,” IEEE Trans. Microw. Theory Tech., vol. 57, no. 4, pp. 824–829, Apr. 2009.
[4] S. Sun, “A dual-band bandpass filter using a single dual-mode ring resonator,” IEEE Microw. Wireless Compon. Lett., vol. 21, no. 6, pp. 298–300, Jun. 2011.
[5] C.-Y Chen, C.-Y. Hsu, and H.-R. Chuang, “Design of miniature planar dual-band filter using dual-feeding structures and embedded resonators, ” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 12, pp. 669–671, Dec. 2006.
[6] H.-W. Wu, Y.-F. Chen, and Y.-W. Chen, “Multi-layered dual-band bandpass filter using stub-loaded stepped impedance and uniform impedance resonators,” IEEE Microw. Wireless Compon. Lett., vol. 22, no. 3, pp. 114–116, Mar. 2012.
[7] A. Djaiz, T. A. Denidni, and M. Nedil, “Dual-band filter using multilayer structures and embedded resonators,” Electron. Lett., vol. 43, no. 9, pp. 527–528, Apr. 2007.
[8] C.-F. Chen, T.-Y. Huang, and R.-B. Wu, “Design of dual- and triple-passband filters using alternately cascaded multiband resonators,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 9, pp. 3550–3558, Sep. 2006.
[9] C.-H. Lee, C.-I. Hsu, and H.-K. JHuang, “Design of a new tri-band microstrip BPF using combined quarter-wavelength SIRs,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 11, pp. 594–596, Nov. 2006.
[10] C.-I G. Hsu, C.-H. Lee, and Y.-H. Hsieh, “Tri-band bandpass filter with sharp passband skirts designed using tri-section SIRs,” IEEE Microw. Wireless Compon. Lett., vol. 18, no. 1, pp. 19–21, Jan. 2008.
[11] X. Lai, C.-H. Liang, H. Di, and B. Wu, “Design of tri-band filter based on stub loaded resonator and DGS resonator,” IEEE Microw. Wireless Compon. Lett., vol. 20, no. 5, pp. 265–267, May 2010.
[12] H.-W. Wu and R.-Y. Yang, “A new quad-band bandpass filter using asymmetric stepped impedance resonators,” IEEE Microw. Wireless Compon. Lett., vol. 21, no. 4, pp. 203–205, Apr. 2011.
[13] K.-W. Hsu and W.-H. Tu, “Design of a novel four-band microstrip bandpass filter using double-layered substrate,” in IEEE MTT-S Int. Microw. Symp. Dig., Boston, MA, Jun. 2009, pp. 1041–1044.
[14] K.-W. Hsu and W.-H. Tu, “Compact wide-stopband quad-band bandpass filter with tunable transmission zeros,” in IEEE MTT-S Int. Microw. Symp. Dig., Montreal, CA, Jun. 2012, pp. 1–3.
[15] J.-C. Liu, J.-W. Wang, B.-H. Zeng, and D.-C. Chang, “CPW-fed dual-mode double-square-ring resonators for quad-band filters, ” IEEE Microw. Wireless Compon. Lett., vol. 20, no. 3, pp. 142–144, Mar. 2010.
[16] J.-Y. Wu and W.-H. Tu, “Design of quad-band bandpass filter with multiple transmission zeros,” Electron. Lett., vol. 47, no. 8, pp. 502–503, Apr. 2011.
[17] K.-W. Hsu, and W.-H. Tu, “Sharp rejection quad-band bandpass filter using meandering sturcture,” Electron. Lett., vol. 48, no. 15, pp. 935–937, Jul. 2012.
[18] M.-J. Tsou and W.-H. Tu, “Multi-transmission-zero quad-band bandpass filter based on quad-mode resonator,” in Proc. Asia-Pacific Microwave Conf., Melbourne, Australia, 2011, pp. 147–150.
[19] S.-C. Lin, “Microstrip dual/quad-band filters with coupled lines and quasi-lumped impedance inverters based on parallel-path transmission,” IEEE Trans. Microw. Theory Tech., vol. 59, no. 8, pp. 1937–1946, Aug. 2011.
[20] J. Xu, C. Miao, L. Cui, Y.-X. Ji, and W. Wu, “Compact high isolation quad-band bandpass filter using quad-mode resonator,” Electron. Lett., vol. 48, no. 1, pp. 28–30, Jan. 2012.
[21] L.-Y. Ren, “Quad-band bandpass filter based on dual-plane microstrip/DGS slot structure,” Electron. Lett., vol. 46, no. 10, pp. 691–692, May. 2010.
[22] S.-Sun, B. Wu, S. Yang, K. Deng, and C.-H. Liang, “A novel quad-band filter using centrally shorted-stub loaded resonator and stepped impedance resonator,” in IEEE MTT-S Int. Microw. Symp. Dig., Montreal, CA, Jun. 2012, pp. 1–3.
[23] C.-M. Cheng and C.-F. Yang, “Develop quad-band (1.57/2.45/3.5/5.2 GHz) bandpass filters on ceramic substrate,” IEEE Microw. Wireless Compon. Lett., vol. 20, no. 5, pp. 268–270, May. 2010.
[24] J.-C. Liu, F.-S. Huang and C.-P. Kuei, “Quad-band dual-mode resonator with dual-square-loop for WLAN and WiMAX systems,” in Cross Strait Quad-Regional Radio Science and Wireless Techno. Conf., Taipei, Taiwan, 2012, pp. 100–103.
[25] M.-S. Wu, Y.-Z. Chueh, J.-C. Yeh, and S.-G. Mao, “Synthesis of triple-band and quad-band bandpass filter using lumped-element coplanar waveguide resonators,” in Progress In Electromagnetics Research B, vol. 13, pp. 433–451, 2009.
[26] S.-C. Weng, K.-W. Hsu, and W.-H. Tu, “Independently switchable quad-band bandpass filter,” IET Microw. Antennas Propag., 2013.
[27] C.-F. Chen, “Design of a Compact Microstrip Quint-Band Filter Based on the Tri-Mode Stub-Loaded Stepped-Impedance Resonators,” IEEE Microw. Wireless Compon. Lett., vol. 22, no. 7, pp. 357–359, Jul. 2012.
[28] K.-W. Hsu, W.-C. Hung, and W.-H. Tu, “Compact Quint-Band Microstrip Bandpass Filter Using Double-Layered Substrate,” IEEE MTT-S Int. Microw. Symp. Dig., Seattle, WA, USA, 2013.
[29] R. Go?mez-Garci?a, J.-M. Munoz-Ferreras, and M. Sa?nchez-Renedo, “Microwave Transversal Six-Band Bandpass Planar Filter for Multi-Standard Wireless Applications,” in IEEE Radio and Wireless Symp., 2011, pp.166-169.
[30] Y.-S. Lin, P.-C. Wang, C.-W. You, and P.-Y. Chang, “New designs of bandpass diplexer and switchplexer based on parallel-coupled bandpass filters,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 12, pp. 3417–3426, Dec. 2010.
[31] S.-C. Lin and T.-L. Jong, “Microstrip bandpass filters with various resonators using connected- and edge-coupling mechanisms and their applications to dual-band filters and diplexers,” IEEE Trans. Microw. Theory Tech., vol. 60, no. 4, pp. 975–988, Apr. 2012.
[32] C.-F. Chen, T.-Y. Huang, C.-P. Chou, and R.-B. Wu, “Microstrip diplexers design with common resonator sections for compact size, but high isolation,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 5, pp. 1945–1952, May 2006.
[33] M.-L. Chuang and M.-T. Wu, “Microstrip diplexer design using common T-shaped resonator,” IEEE Microw. Wireless Compon. Lett., vol. 21, no. 11, pp. 583–585, Nov. 2011.
[34] H.-W. Liu, W.-Y. Xu, Z.-C. Zhang, and X.-H. Guan, “Compact diplexer using slotline stepped impedance resonator,” IEEE Microw. Wireless Compon. Lett., vol. 23, no. 2, pp. 75–77, Feb. 2013.
[35] T. Yang, P.-L. Chi, and T. Itoh, “High isolation and compact diplexer using the hybrid resonators,” IEEE Microw. Wireless Compon. Lett., vol. 20, no. 10, pp. 551–553, Oct. 2010.
[36] P.-H. Deng, M.-I. Lai, S.-K. Jeng, and C. H. Chen, “Design of matching circuits for microstrip triplexers based on stepped-impedance resonators,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 12, pp. 4185–4192, Dec. 2006.
[37] C.-F. Chen, T.-M. Shen, T.-Y. Huang, and R.-B. Wu, “Design of multimode net-type resonators and their applications to filters and multiplexers,” IEEE Trans. Microw. Theory Tech., vol. 59, no. 4, pp. 848–856, Apr. 2011.
[38] C.-W. Tang and M.-G. Chen, “Packaged microstrip triplexer with star-junction topology,” Electron. Lett., vol. 48, no. 12, pp. 699–701, Jun. 2012.
[39] J.-Y. Wu, K.-W. Hsu, Y.-H. Tseng, and W.-H. Tu, “High-isolation microstrip triplexer using multiple-mode resonators,” IEEE Microw. Wireless Compon. Lett., vol. 22, no. 4, pp. 173–175, Apr. 2012.
[40] S.-J. Zeng, J.-Y. Wu, and W.-H. Tu, “Compact and high-isolation quadruplexer using distributed coupling technique,” IEEE Microw. Wireless Compon. Lett., vol.21, no.4, pp.197–199, Apr. 2011.
[41] C.-F. Chen, T.-M. Shen, T.-Y. Huang, and R.-B. Wu, “Design of compact quadruplexer based on the tri-mode net-type resonators,” IEEE Microw. Wireless Compon. Lett., vol. 21, no. 10, pp. 534–536, Oct. 2011.
[42] M. Zewani and I. C. Hunter, “Design of ring-manifold microwave multiplexers,” in IEEE MTT-S Int. Microw. Symp. Dig., San Francisco, USA, 2006, pp. 689–692.
[43] W.-H. Tu, “Compact microstrip bandpass using semi-lumped resonators”.
[44] J. S. Hong and M. J. Lancaster, Microstrip Filters for RF/Microwave Application, New York: Wiley, 2001.
指導教授 ?文化(Wen-hua Tu) 審核日期 2014-1-13
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明