|| M.-H. Chang, D. Das, P. V. Varde, and M. Pecht. (2012, Light emitting diodes reliability review. Microelectronics Reliability 52(5), 762-782. |
 N. Chen, "Numerical Simulation and Experimental Researches on the LED Reliability under Temperature Loading," Appl. Math, vol. 6, pp. 775-779, 2012.
 J. H. Hwang, Y. D. Kim, J. W. Kim, S. J. Jung, H. K. Kwon, and T. H. Oh, "Study on the effect of the relative position of the phosphor layer in the LED package on the high power LED lifetime," physica status solidi (c), vol. 7, pp. 2157-2161, 2010.
 X. Luo and R. Hu, "Calculation of the phosphor heat generation in phosphor-converted light-emitting diodes," International Journal of Heat and Mass Transfer, vol. 75, pp. 213-217, 2014.
 C. Sommer, P. Hartmann, P. Pachler, M. Schweighart, S. Tasch, G. Leising, et al., "A detailed study on the requirements for angular homogeneity of phosphor converted high power white LED light sources," Optical Materials, vol. 31, pp. 837-848, 2009.
 S. J. Lee, "Analysis of light-emitting diodes by Monte Carlo photon simulation," Applied Optics, vol. 40, pp. 1427-1437, 2001.
 N. R. Taskar, R. N. Bhargava, J. Barone, V. Chhabra, V. Chabra, D. Dorman, et al., "Quantum-confined-atom-based nanophosphors for solid state lighting," in Optical Science and Technology, SPIE′s 48th Annual Meeting, 2004, pp. 133-141.
 A. Kitai, Luminescent materials and applications vol. 25: John Wiley & Sons, 2008.
 S. Shionoya, W. M. Yen, and T. Hase, Phosphor handbook vol. 1: CRC press Boca Raton, FL, 1999.
 郭浩中與郭守義, LED原理與應用第二版:五南文化事業, 2012.
 J. Mitschele, "Beer-Lambert Law," Journal of Chemical Education, vol. 73, p. A260, 1996.
 J. Houghton, The physics of atmospheres: Cambridge University Press, 2002.
 H.-y. Ho, "The study of optical modeling of YAG phosphor for white light LED," 2007.
 F. Incropera and D. DeWitt, "Introduction to heat transfer," 1985.
 J. M. Palmer and B. G. Grant, The art of radiometry: SPIE Press Bellingham, 2010.
 B. Fan, H. Wu, Y. Zhao, Y. Xian, and G. Wang, "Study of phosphor thermal-isolated packaging technologies for high-power white light-emitting diodes," Photonics Technology Letters, IEEE, vol. 19, pp. 1121-1123, 2007.
 J.-G. Chang, C.-Y. Lin, C.-C. Hwang, and R.-J. Yang, "Optical design and analysis of LCD backlight units using ASAP," Opt. Eng. Mag, vol. 82, pp. 75-89, 2003.
 "Cree® EZ700-n LED Data Sheet."
 " GRMSTONE."
 M. Maaspuro and A. Tuominen, "Thermal Simulations of a LED Light Using COMSOL Multiphysics," in Proceedings of the 2012 COMSOL Conference in Milan.
 M. Zachau, D. Becker, D. Berben, T. Fiedler, F. Jermann, and F. Zwaschka, "Phosphors for solid state lighting," in Integrated Optoelectronic Devices 2008, 2008, pp. 691010-691010-8.
 Q. Mu, S. Feng, and G. Diao, "Thermal conductivity of silicone rubber filled with ZnO," Polymer composites, vol. 28, pp. 125-130, 2007.
 C.-C. Sun, Y.-Y. Chang, T.-H. Yang, T.-Y. Chung, C.-C. Chen, T.-X. Lee, et al., "Packaging efficiency in phosphor-converted white LEDs and its impact to the limit of luminous efficacy," Journal of Solid State Lighting, vol. 1, pp. 1-17, 2014.
 R. Mueller-Mach, G. O. Mueller, and M. R. Krames, "Phosphor materials and combinations for illumination-grade white pcLEDs," in Optical Science and Technology, SPIE′s 48th Annual Meeting, 2004, pp. 115-122.
 M. Kasori and F. Ueno, "Thermal conductivity improvement of YAG added A1N ceramics in the grain boundary elimination process," Journal of the European Ceramic Society, vol. 15, pp. 435-443, 1995.