參考文獻 |
[1] H.Masuda , F. Hasegwa , S. Ono,“Self-Ordering of Cell Arrangement of Anodic Porous Alumina Formed in Sulfuric Acid Solution”,Journal of The Electrochemical Society, Vol.144, pp.L127-L130,1997
[2] G. E. Thompson,“Porous anodic alumina: fabrication, characterization and applications”,Thin Solid Films, Vol.297, pp.192-201,1997
[3] O. Jessensky , F. Muller , U. Gosele,“Self-organized formation of hexagonal pore arrays in anodic alumina”,Appiled Physics Letters, Vol.72, pp.1173-1175,1998
[4] T. S. Shih , P. S. Wei,“Monitoring the progressive development of an anodized film on aluminum”,Journal of the Electrochemical Society, Vol.154, pp.678-683,2007
[5] I. Farnan , R. Dupree , A. J. Forty , Y. S. Jeong , G. E. Thompson , G. C. Wood,“Structural information about amorphous anodic alumina from 27Al MAS NMR”,Philosophical Magazine Letters, Vol.59, pp.189-195,1989
[6] T. P. Hoar , J. Yahalom,“The initiation of pores in anodic oxide films formed on aluminum in acid solutions”,Journal of the Electrochemical Society, Vol.110, pp.614-621,1963
[7] G. D. Sulka , K. G. Parkoaa ,” Anodising potential influence on well-ordered nanostructures formed by anodisation of aluminium in sulphuric acid” , Thin Solid Films,Vol.515,pp.338-345,2006
[8] G. D. Sulka , K. G. Parkoaa ,” Temperature influence on well-ordered nanopore structures grown by anodization of aluminium in sulphuric acid” , Electrochimica Acta,Vol.52,pp.1880-1888,2007
[9] G. C. Wood , J. P. O’Sullivan,“The Anodizing of Aluminium in Sulphate Solutions”,Electrochimica Acta, Vol.15, pp.1865-1876,1970.
[10] Y. S. Kim , S. I. Pyun , S. M. Moon , J. D. Kim,“The effects of Applied Potential and pH on The Electrochemical Dissolution of Barrier Layer in Porous Anodic Oxide Film on Pure Aluminum”,Corrosion Science, Vol.38, pp.329-336,1996
[11] T. S. Shih , P. S. Wei , Y. S. Yung,“Optical properties of anodic aluminum oxide films on Al1050 alloys”,Surface & Coatings Technology, Vol.202, pp.3298-3305,2008
[12] Q. Huang, W-K Lye, M. L. Reed,” Mechanism of isolated pore formation in
anodic alumina”, Nanotechnology,Vol.18,pp.405302
[13] P. Skeldon, G. E. Thompson, S. J. Garcia-Vergara, L. Iglesias-Rubianes, C. E. Blanco-Pinzon,” A Tracer Study of Porous Anodic Alumina”, Electrochemical and Solid-State Letters,Vol.9,B47-B51,2006
[14] R. Q. Yang , L. F. Jiang, X. F. Zhu, Y, Song, D.L. Yu, A.J. Han,” Theoretical derivation of ionic current and electronic current and comparison between fitting curves and measured curves”,RSC Advances,Vol.2,pp.12474-12481,2012
[15] G. E. Thompson , G. C. Wood,” Porous anodic film formation on aluminium”,Nature,
Vol.290,pp.230-232,1981
[16] R. Zhang, K. M. Jiang, G. Q. Ding,”Surface morphology control on porous anodic alumina in phosphoric acid”,Thin Solid Flims,Vol.518,pp3797-3800,2010
[17] W. Lee , R. Ji , U. Gosele , K. Nielsch,“Fast fabrication of long-range ordered porous alumina membranes by hard anodization”, nature materials,Vol.5, pp.741-747,2006
[18] K. Nielsch , J. Choi , K. Schwirn , R. B. Wehrspohn , U. Gosele,“Self-ordering regimes of porous alumina: The 10% porosity rule”,Nano Letters,Vol.2, pp.677-680,2002
[19] S. Ono , M. Saito , M. Ishiguro , H. Asoh,“Controlling Factor of Self-Ordering of Anodic Porous Alumina”,Journal of The Electrochemical Society, Vol. 151, pp.473-478,2004
[20] Y Li , Z. Y. Ling , S. S. Chen , J. C. Wang,“Fabrication of novel porous anodic alumina membranes by two-step hard anodization”,Nanotechnology, Vol. 19,pp.225604-225609, 2008
[21] X. Zhou, G.E. Thompson, P. Skeldon, “Effect of grain orientation on the morphology, dielectric breakdown and optical behaviour of anodic film formed on Al–2wt%Cu binary alloy” Electrochimica Acta , Vol.53 , pp.5684–5691 , 2008
[22] Tsangaraki-Kaplanoglou, S. Theohari, Th. Dimogerontakis, Y. M. Wang, H. H. Kuo, S. Kia, “Effect of alloy types on the anodizing process of aluminum”,Surface and Coatings Technology, Vol.200, pp.2634 , 2006
[23] K. Mukhopadhyay, “On the Nature of the Fe-Bearing Particles Influencing Hard Anodizing Behavior of AA 7075 Extrusion Products”,Metallurgical and Materials Transactions A, Vol.29 , pp.978 , 1998
[24] K. Mukhopadhyay, “Influence of Fe-bearing particles and nature of electrolyte on the hard anodizing behaviour of AA 7075 extrusion products”,A. K. Sharma, Surface and Coatings Technology, Vol.92, pp.212 , 1997
[25] M. Shahzad, M. Chaussumier, R. Chieragatti, C. Mabru, F. Rezai-Aria, “Influence of surface treatments on fatigue life of Al 7010 alloy”,Materials and Design, Vol.32 , pp.3328 , 2011
[26] L. E. Fratila-Apachitei, F. D. Tichelaar, G. E. Thompson, H. Terryn, P. Skeldon, J. Duszczyk, L. Katgerman,” A transmission electron microscopy study of hard anodic oxide layers on AlSi(Cu) alloys” ,Electrochemica. Acta , Vol.49, pp.3169 , 2004
[27] S.Wernick , R. Pinner , P. G. Sheasby, “The surface treatment and finishing of aluminum and its alloys”,Finishing Publication Ltd. ,England, 1987
[28] Y. Zuo , P. H. Zhao , J. M. Zhao,“The influences of sealing methods on corrosion behavior of anodized aluminum alloys in NaCl solutions”,Surface and Coatings Technology ,Vol. 166 , pp.237–242,2003
[29] V. Lopez , M. J. Bartolome , E. Escudero , E. Otero , J. A. Gonzalez,“Comparison by SEM, TEM, and EIS of hydrothermally sealed and cold sealed aluminum anodic oxides”,Journal of the Electrochemical Society, Vol 153, pp.75-82,2006
[30] 劉志維,「鋁鎂合金陽極處理技術之研發」,國立中央大學,碩士,民國91年
[31] O. J. Murphy , J. S. Wainright , J. J. Lenczewski , J. H. Gibson , M. W. Santana,“Spectroscopic Investigations of Porous and Sealed Anodic Alumina Films”,Journal of the Electrochemical Society Vol 136 , pp.3518-3525,1989
[32] A. Dito, F. Tegiacchi,”Cold sealing of anodized aluminium with nickel salt solutions”, Plating and surface finishing,Vol.72,pp.72-78,1985
[33] T. Ishikuro, S. Matsuoka,” Structure change and deveropment of alkali resistance of aluminum anodic oxide film by hydrothermal treatment”,Society of Materials Science, Vol.53,pp.1234-1239, 2004
[34] T. Tsujita, H. Sato, S. Tsukahara, Y. Ishikawa,” A Study on Sealing Process of Anodized Al Alloy Film”, Journal of the Vacuum Society of Japan, Vol.48, (2006),pp.217-219
[35] V. Lopez, M. J. Bartolome, E. Escudero, E. Otero, J. A. Gonzalez,” Comparison by SEM, TEM, and EIS of Hydrothermally Sealed and Cold Sealed Aluminum Anodic Oxides”, Journal of The Electrochemical Society,Vol.153,B75-B82,2006
[36] F. Snogan, C. Blanc, G. Mankowski, N. Pebere,” Characterisation of sealed anodic films on 7050 T74 and 2214 T6 aluminium alloys”,Surface and Coatings Technology, Vol.154,pp.94-103,2002
[37] J. J. Ren , Y. Zuo,“The growth mechanism of pits in NaCl solution under anodic films on aluminum”,Surface and Coatings Technology, Vol 191, pp.311-316,2005
[38] V. Moutarlier , M. P. Gigandet , J. Pagetti,“Characterisation of pitting corrosion in sealed anodic films formed in sulphuric,sulphuric/molybdate and chromic media”,Applied Surface Science ,Vol 206, pp.237-249,2003
[39] N. Voevodin , C. Jeffcoate , L. Simon , M. Khobaib , M. Donley,“Characterization of pitting corrosion in bare and sol–gel coated aluminum 2024-T3 alloy”,Surface and Coatings Technology, Vol 140, pp.29-34,2001
[40] K. Genel, ”Environmental effect on the fatigue performance of bare and oxide coated 7075-T6 alloy”, Engineering Failure Analysis, Vol.32,pp.248–260,2013
[41] J. J. Ren , Y. Zuo,“The growth mechanism of pits in NaCl solution under anodic films on aluminum”,Surface and Coatings Technology, Vol 191, pp.311-316,2005
[42] 柯賢文,腐蝕及其防治,全華科技圖書出版社,民國87年
[43] M. G. Fontana,Corrosion engineering,3rd edition,McGraw-Hill,New York,pp.53-67,1986
[44] V. Moutarlier , M. P. Gigandet , J. Pagetti,“Characterisation of pitting corrosion in sealed anodic films formed in sulphuric,sulphuric/molybdate and chromic media”,Applied Surface Science ,Vol 206, pp.237-249,2003
[45] S. I. Pyun, W. J. Lee,” The effect of prior Cl- ion incorporation into native oxide film on pure aluminium in neutral chloride solution on pit initiation”, Corrosion Science,
Vol.43,pp.353-361,2001
[46] J. Wloka, G. Burklin, S. Virtanen,” Influence of second phase particles on initial electrochemical properties of AA7010-T76”, Electrochimica Acta,Vol.53,
pp.2055-2059,2007
[47] N. Birbilis, M. K. Cavanaugh, R. G. Buchheit,” Electrochemical behavior and localized corrosion associated with Al7Cu2Fe particles in aluminum alloy 7075-T651”, Corrosion Science,Vol.48,pp4202-4215,2006
[48] F. Andreatta, M. M. Lohrengel, H. Terryn, J. H. W. de Wit,” Electrochemical characterisation of aluminium AA7075-T6 and solution heat treated AA7075 using a micro-capillary cell”,Electrochimica Acta,Vol.48,pp.3239-3247,2003
[49] X. Li, X. Nie, L. Wang, D.O. Northwood, ”Corrosion protection properties of anodic oxide coatings on an Al–Si alloy”, Surface & Coatings Technology, Vol200,
pp.1994–2000,2005
[50] Y. H. Zhaoa﹐X. Z. Liao a﹐Z. Jin b﹐R. Z. Valiev c﹐Y. T. Zhu a,“Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing” , Acta Materialia, Vol52﹐pp.4589-4599﹐2004
[51] S. K. Panigrahi﹐R. Jayaganthan,”Development of ultrafine grained high strength age hardenable Al 7075 alloy by cryorolling”, Materials and Design, Vol.32, pp.3150-3160, 2011
[52] F. Viana, A. M. P. Pinto, H. M. C. Santos, A. B. Lopes,”Retrogression and re-ageing of 7075 aluminium alloy: microstructural characterization”, Journal of Materials Processing Technology, Vol.92-93, pp.54-59, 1999
[53] J. J. Thompsom, E. S. Tankins, V. S. Agarwala,”A heat treatment for reducing corrosion and stress corrosion cracking susceptibilities in 7xxx aluminum alloy”,Materials Performance, Vol.26, pp.45-52, 1987
[54] J. R. Davis, ASM Specialty Handbook:Aluminum and Aluminum Alloys,ASM International, 1993
[55] D. Wang, D. R. Ni, Z. Y. Ma,“Effect of pre-Strain and two-step aging on microstructure and stress corrosion cracking of 7050 alloy”,Materials Science and Engineering A, Vol.494, pp.360-366, 2008
[56] P. N. Adler, R. Delasi, G. Geschwind,“Influence of Microstructure on the Mechanical Properties and Stress Corrosion Susceptibility of 7050 Aluminum Alloy”, Metallurgical and Materials Transactions B, Vol.3, pp.3191-3200, 1972
[57] A. Abolhasani, A. Zarei-Hanzaki, H. R. Abedi, M. R. Rokni, “The room temperature mechanical properties of hot rolled 7075 aluminum alloy”, Materials and Design, Vol.34, pp.631-636, 2012
[58] D. K. Xu,” Effect of S-Phase Dissolution on the Corrosion and Stress Corrosion Cracking of an As Rolled Al-Zn-Mg-Cu Alloy”, CORROSION,Vol.68,2012
[59] M. Saenz de Miera, M. Curioni, P. Skeldon, G. E. Thompson, “Modelling the anodizing behaviour of aluminium alloys in sulphuric acid through alloy analogues”, Corrosion Science, Vol.50, pp.3410-3415, 2008
[60] A. K. Mukhopadhyay, “On the Nature of the Fe-Bearing Particles Influencing Hard Anodizing Behavior of AA 7075 Extrusion Products”, Metallurgical and Materials Transactions A, Vol.29, pp.978-987, 1998
[61] M. Saenz de Miera, M. Curioni, P. Skeldon, G. E. Thompson, “Preferential anodic oxidation of second phase constituents during anodizing of AA2024-T3 and AA7075-T6 alloys”, Surface and Interface Analysis, Vol.42, pp.241-246, 2010
[62] J. Wloka, S. Virtanen, ”Detection of nanoscale η-MgZn2 phase dissolution from an Al-Zn-Mg-Cu alloy by electrochemical micro transients”, Surface and Interface Analysis, Vol.40,pp.1219-1225, 2008
[63] Y. H. Zhao, X. Z. Liao, S. Cheng, E. Ma, Yuntian, T. Zhu, ” Simultaneously Increasing the Ductility and strength of Nanostructures Alloys”, Advanced Materials, Vol.18, pp.2280-2283, 2006
[64] S. P. Knight, N. Birbilis, B. C. Muddle, A. R. Trueman , S. P. Lynch, “Correlations between intergranular stress corrosion cracking, grain-boundary microchemistry, and grain-boundary electrochemistry for Al–Zn–Mg–Cu alloys”, Corrosion Science, Vol.52,pp.4073-4080, 2010
[65] F. Wang, B. Q. Xiong, Y. G. Zhang, Z. H. Zhang, Z. X. Wang, B. H. Zhu, H. Q. Liu,” Microstructure and mechanical properties of spray-deposited Al–Zn–Mg–Cu alloy”, Materials and Design, Vol.28, pp.1154-1158, 2007
[66] G. Sha, Y. B. Wang, X. Z. Liao, Z. C. Duan, S. P. Ringer, T. G. Langdon, “Microstructural evolution of Fe-rich particles in an Al–Zn–Mg–Cu alloy during equal-channel angular pressing”, Materials Science and Engineering A, Vol.527, pp.4742-4749, 2010
[67] W.Feng﹐X.Baiqing﹐Z.Yongan﹐L.Hongwei﹐Li.Zhihui﹐L.Qiang﹐”Microstructure and mechanical properties of spary-deposited Al-Zn-Mg-Cu alloy processed through hot rolling and heat treatment”, Materials Science and Engineering A, Vol.518, pp.144-149, 2009
[68] F. Y. Hung, J. D. Liao, T. S. Lui, L. H. Chen, “Electrical current induced mechanism in microstructure and nano-indention of AleZneMgeCu (AZMC) Al alloy thin film”, Current Applied Physics, vol.11, pp.1269-1273, 2011
[69] S. P. Knight, N. Birbilis, B. C. Muddle, A. R. Trueman, S. P. Lynch, “Correlations between intergranular stress corrosion cracking, grain-boundary microchemistry, and grain-boundary electrochemistry for Al–Zn–Mg–Cu alloys”, Corrosion Science, Vol.52,pp.4073-4080, 2010
[70] J. B. Jordon, M. F. Horstemeyer, K. Solanki, J. D. Bernard, J. T. Berry, T. N. Williams, “Damage characterization and modeling of a 7075-T651 aluminum plate”, Materials Science and Engineering A, Vol.527,pp.169-179, 2009
[71] “Fatigue and Fracture”, ASM Handbook, vol.19, 1996
[72] 陳永增,鄧惠源, “機械材料試驗”, 高立出版社, 台北, 民國86 年
[73] H. W. Hayden, W. G. Moffatt and J. Wulff, “The structure and properties of Materials”, Vol.3, John Wiley, United Kingdom, 1965
[74] C. R. Krenn, J. W. Morris Jr., “The compatibility of crack closure and Kmax dependent models of fatigue crack growth”, International Journal of Fatigue, Vol.21, pp. 147-155, 1999
[75] A. K. Vasudévan, P. E. Bretz,” Near-threshold fatigue crack growth behaviour of 7xxx and 2xxx alloys: A brief review”, Proceedings of the International symposium on fatigue crack growth threshold concepts, Philadelphia, 1983
[76] Robert E. Reed-Hill, “The Microscopic Aspects of Fatigue Failure”,Physical Metallurgy Principles 3th Edition, pp.755~760, 1994
[77] Robert E. Reed-Hill, “The Plastic Zone Size Ahead of A Crack”, Physical Metallurgy Principles 3th Edition, pp.792~795, 1994
[78] M. Klesnil, P. Lukas, “Kinetics of Crack Growth”, Fatigue of Metallic Materials, Second Revised Edition, pp.92~97, 1992
[79] C. Laird, “The influences of Metallurgical structure on the mechanisms of fatigue crack propagation, Fatigue crack propagation”, ASTM STP 415, Society for Testing and Materials, Philadelphia, PA, USA, 1967
[80] Robert E. Reed-Hill, “The Rotating-Beam Fatigue Test”, Physical Metallurgy Principles 3th Edition, pp.750~752, 1994
[81] E. Cirik, K. Genel,” Effect of anodic oxidation on fatigue performance of 7075-T6 alloy”, Surface & Coatings Technology,Vol.202,pp.5190-5201, 2008
[82] A. Camargo, H. Voorwald, ” Influence of anodization on the fatigue strength of 7050-T7451 aluminum alloy”, Fatigue and Fracture of Engineering Materials and Structures, Vol.30, pp.993-1007, 2007
[83] L. Iglesias-Rubianes , P. Skeldon, G.E. Thompson, U. Kreissig, D. Grambole, H. Habazaki, K. Shimizu .”Behaviour of hydrogen impurity in aluminium alloys during anodizing” , Thin Solid Films ,Vol.424 , pp . 201–207 , 2003
[84] Y. Murakami , S. Matsuoka. “Effect of hydrogen on fatigue crack growth of metals” , Engineering Fracture Mechanics ,Vol77, pp .1926–1940
[85] S. Feliu Jr, Ma. J. Bartolome, J. A. Gonzalez and S. Feliu ,“XPS Characterization of porous and sealed anodic films on aluminum alloys” ,Journal of The Electrochemical Society, Vol.154,pp.C241-C248,2007
[86] T. S. Shih , P. C. Chen , Y. S. Huang,“Effects of the hydrogen content on the development of anodic aluminum oxide film on pure aluminum”,Thin Solid Films, Vol 519, pp.7817-7825,2011
[87] S. Feliu Jr., J. A. Gonzalez, V. Lopez, M. J. Bartolome, E. Escudero, E. Otero, “Characterisation of porous and barrier layers of anodic oxides on different aluminium alloys”,Journal of Applied Electrochemistry, Vol.37, pp.1027-1037,2007
[88] K. Mansouri, K. Ibrik, N. Bensalah, A. Abdel-Wahab ,“Anodic dissolution of pure aluminum during electrocoagulation process:influence of supporting electrolyte, initial pH, and current density”,Industrial &Engineering Chemistry Research, Vol.50, pp.13362-13372, 2011
[89] J. D. Kim, Su-Il Pyun, R. A. Oriani , ” Effects of applied current density and potential step on the stress generation during anodic oxidation of tungsten in 0.1 M H2SO4 Solution ” , Electrochimica acta , Vol. 40, pp.1171-1176, 1995
|