參考文獻 |
參考文獻
1. Shinichiro Fujikawa, Yukiyoshi Kitamura, Saburo Shimamura, “Application of numerical methods for the aluminum casting/forging process”, Journal of Materials processing Technology, Vol.27, pp.93-110, (1991).
2. 日本輕金屬學會委員,”鋁合金之組織與性質”,日本輕金屬學會,pp.278-279,(1991)。
3. L. Zhen, W. D. Fei, S. B. Kang, H. W. Kim, “Precipitation behaviour of Al-Mg-Si alloys with high silicon content”, Journal of Materials Science, pp.1895-1902, (1997).
4. Mahoto Takeda, Fumiyoshi Ohkubo, Tomohisa Shirai, Kouichiro Fukui, “Precipitation behaviour of Al-Mg-Si ternary alloys”, Materials Science Forum, Vol.217-222, pp.815-820, (1996).
5. D. Apelian, S. Shivkumar, G. Sigworth, “Fundamental Aspects of Heat Treatment of cast Al-Si-Mg alloys”, AFS Transactions, pp.727-741.
6. M. Cabibbo, E. Evangelista, and M. Vedani, “Influence of Severe Plastic Deformations on Secondary Phase Precipitation in a 6082 Al-Mg-Si Alloy”, Metallurgical and Materials Transactions A, Vol.36A, pp1353-1364, (2005).
7. A. K. Gupta, D. J. Lloyd, S. A. Court, “Precipitation hardening in Al–Mg–Si alloys with and without excess Si”, Materials Science and Engineering A, Vol.316, PP.11-17, (2001).
8. G. A. Edwards, K. Stiller, G. L. Dunlop and M. J. Couper, “THE PRECIPITATION SEQUENCE IN Al-Mg-Si ALLOYS”, Acta Mater, Vol.46, No.11, pp3893-3904, (1998).
9. A. Falahati, M. R. Ahmadi, P. Warczok, P. Lang, E. Povoden-Karadeniz, E. Kozeschnik, “Thermo-kinetic computer simulation of precipitation and age-hardening effect in Al-Mg-Si alloys with arbitrary heat treatment”, Materials Science and technology, (2011).
10. Reza S. Yassar, David P. Field, and Hasso Weiland, “The Effect of Cold Deformation on the Kinetics of the β” Precipitates in an Al-Mg-Si Alloy”, Metallurgical and Materials Transactions A, Vol.36A, pp2059-2065, (2005).
11. Takeshi Saito, Shinji Muraishi, Calin D. Marioara, Sigmund J. Andersen, Jostein Royset, and Randi Holmestad, “The Effects of Low Cu Additions and Predeformation on the Precipitation in a 6060 Al-Mg-Si Alloy”, Metallurgical and Materials Transactions A, Vol.44A, pp4124-4135, (2013).
12. D. J. Chakrabarti, David E. Laughlin, “Phase relations and precipitation in Al-Mg-Si alloys with Cu additions”, Progress in Materials Science, Vol.49, pp389-410, (2004).
13. C. Ravi, C. Wolverton, “First-principles study of crystal structure and stability of Al–Mg–Si–(Cu) precipitates”, Acta Materialia, Vol.52, pp.4213-4227, (2004).
14. M. A. van Huis, J. H Chen, H. W. Zandbergen, M. H. F. Sluiter, “Phase stability and structural relations of nanometer-sized, matrix-embedded precipitate phases in Al–Mg–Si alloys in the late stages of evolution”, Acta Materialia, Vol.54, pp2945-2955, (2006).
15. Yong Du, Y. A. Chang, Baiyun Huang, Weiping Gong, Zhanpeng Jin, Honghui Xu, Zhaohui Yuan, Yong Liu, Yuehui He, F. –Y. Xie, “Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation”, Materials Science and Engineering, Vol.A363, pp.140-151, (2003).
16. Myriam Nicolas, “Precipitation evolution in an Al-Zn-Mg alloy during non-isothermal heat treatments and in the heat-affected zone of welded joints”, Institut National Polytechnique de Grenoble, pp.144-148, (2002).
17. Barin Ihsan, “Thermochemical data of pure substances”, Weinheim, (1995).
18. Takahiro Yabe, Masanori Enoki and Hiroshi Ohtani, “Thermodynamic analysis of phase separation in the Al-Cu binary fcc phase”, J. Japan Inst. Met. Mater., Vol.80, pp.370-378, (2016).
19. Kenji Matsuda, Daisuke Teguri, Tatsuo, Yasuhiro Uetari and Susumu Ikeno, “Cu Segregation around Metastable Phase in Al-Mg-Si Alloy with Cu”, Materials Transactions, Vol.48, pp. 967-974, (2007).
20. Kenji Matsuda, Daisuke Teguri, Yasuhiro Uetani, Tatsuo Sato, Susumu Ikeno, “Cu-segregation at the Q’/α-Al interface in Al–Mg–Si–Cu alloy”, Scripta Materialia, Vol.47, pp833-837, (2002).
21. Goroh Itoh, Takehiko Eto, Yoshimitsu Miyagi and Motohiro Kanno, “Al-Zn-Mg alloys”, Jstage, Vol.38, No.12, pp.818-839, (1988).
22. Yutaka S.Sato, Seung Hwan C. Park, Masato Michiuchi, Hiroyuki Kokawa, “Constitutional liquation during dissimilar friction stir welding of Al and Mg alloys”, Scripta Materialia, Vol.50, pp.1233-1236, (2004).
23. M. J. Starink, S. C. Wang, “A model for the yield strength of overaged Al-Zn-Mg-Cu alloys”, Acta Materialia, Vol.51, pp.5131-5150, (2003).
24. Mahmoud Chemingui, Mohamed Khitouni, Karol Jozwiak, Gerard Mesmacque, Abdelwaheb Kolsi, “Characterization of the mechanical properties changes in an Al-Zn-Mg alloy after a two-step ageing treatment at 70℃ and 135℃”, Materials and Design, Vol.31, pp.3134-3139, (2010).
25. C.Wolverton, “Crystal structure and stability of complex precipitate phases in Al-Cu-Mg-(Si) and Al-Zn-Mg alloys”, Acta mater., Vol.49, pp.3129-3142, (2001).
26. G. Waterloo, V. Hansen, J. Gjonnes, S. R. Skjervold, “Effect of predeformation and presaging at room temperature in Al-Zn-Mg-(Cu,Zr) alloys”, Materials Science and Engineering, Vol.303, pp.226-233, (2001).
27. L. K. Berg, J. Gjonnes, V. Hansen, X. Z. Li, M. Knutson-Wedel, G. Waterloo, D. Schryvers and L. R. Wallenberg, “GP-zones in Al-Zn-Mg alloys and their role in artificial aging”, Acta mater., Vol.49, pp.3443-3451, (2001).
28. X. Z. Li, V. Hansen, J. Gjonnes and L. R. Wallenberg, “HREM study and structure modeling of the η’ phase, the hardening precipitates in commercial Al-Zn-Mg alloys”, Acta mater., Vol.47, pp.2651-2659, (1999).
29. S. P. Ringer and K. Hono, “Microstructural evolution and age hardening in aluminium alloys: Atom probe field-ion Microscopy and transmission electron microscopy studies”, Materials Characterization, Vol.44, pp.101-131, (2000).
30. J. J. Thompsom, E. S. Tankins, V. S. Agarwala, “A heat treatment for reducing corrosion and stress corrosion cracking susceptibilities in 7xxx aluminum alloys”, Materials Performance, Vol.26, pp.45-52, (1987).
31. T. Engdahl, V. Hansen, P. J. Warren, K. stiller, “Investigation of fine scale precipitates in Al-Zn-Mg alloys after various heat treatments”, Materials Science and Engineering:A, Vol.327, pp59-64, (2002).
32. K. Stiller, P. J. Warren, V. Hansen, J. Angenete, J. Gjonnes, “Investigation of precipitation in an Al–Zn–Mg alloy after two-step ageing treatment at 100° and 150°C”, Materials Science and Engineering A, Vol.270, pp.53-63, (1999).
33. Qingjiang Meng and G. S. Frankel, “Effect of Cu Content on Corrosion Behavior of 7xxx Series Aluminum Alloys”, Journal of The Electrochemical Society, Vol.151, pp.271-283, (2004).
34. I. S. Kim and M. C. Chaturvedi, “Serrated Flow in Al-5wt.% Mg Alloy”, Materials Science and Engineering, Vol.37, pp 165-172, (1979).
35. E. A. Brandes and G. B (Editors), Smithells Metals Reference Book, 7th edition, Butter worth-Heinemann, Oxford, (1992).
36. D. Altenpohl, “Aluminum”, Vol.37, pp.401-411, (1961).
37. John E. Hatch, “Aluminum: properties and Physical Metallurgy”, American Society for Metals, USA, pp145-148, (1984).
38. I. J. Polmear, “Light Alloys Metallurgy of the Light Metals”, 2nd ed, Edward Arnold, London, England, pp.18-143, (1989).
39. Kanghua Chen, Hongwei Liu, Zhuo Zhang, Song Li, Richard I. Todd, “The improvement of constituent dissolution and mechanical properties of 7055 aluminum alloy by stepped heat treatments”, Journal of Materials Processing Technology, Vol.142, pp.190–196 (2003).
40. Yi Meng, Jianzhong Cui, Zhihao Zhao, Lizi He, “Effect of Zr on microstructures and mechanical properties of an Al-Mg-Si-Cu-Cr alloy prepared by low frequency electromagnetic casting", Materials Characterization, Vol.92, pp.138-148 (2014).
41. Yi Meng, Jianzhong Cui, Zhihao Zhao, Yubo Zuo, ”Effect of vanadium on the microstructures and mechanical properties of an Al–Mg–Si–Cu–Cr–Ti alloy of 6XXX series”, Journal of Alloys and Compounds, Vol.573, pp.102–111 (2013).
42. Yi Meng, Zhi-hao Zhao, Jian-zhong Cui, “Effect of minor Zr and Sc on microstructures and mechanical properties of Al−Mg−Si−Cu−Cr−V alloys”, Trans. Nonferrous Met. Soc. China, Vol.23, pp.1882−1889 (2013).
43. J. R. Davis, ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International, (1993).
44. Tang Jian-guo, Chen Hui, Zhang Xin-ming, Liu Sheng-dan, Liu Wen-jun, Ouyang Hui, Li Hong-ping, “Influence of quench-induced precipitation on aging behavior of Al-Zn-Mg-Cu alloy”, Trans. Nonferrous Met. Soc. China, Vol.22, pp1255-1263, (2012).
45. Liu Sheng-dan, Zhang Xin-ming, Chen Ming-an, You Jiang-hai, Zhang Xian-yan, “Effect of Zr content on quench sensitivity of AlZnMgCu alloys’, Trans. Nonferrous Met. Soc.China, Vol.17, pp.787-792, (2007).
46. D. Wang, D. R. Ni, Z. Y. Ma, “Effect of pre-Strain and two-step aging on microstructure and stress corrosion cracking of 7050 alloy”, Materials Science and Engineering A, Vol.494, pp.360-366, (2008).
47. P. N. Alder, R. Delasi, G. Geschwind, “Influence of Microstructure on the Mechanical Properties and Stress Corrosion Susceptibility of 7050 Aluminum Alloy”, Metallurgical and Materials Transaction B, Vol.3, pp.3191-3200, (1972).
48. L. B. Ber, “Accelerated artificial ageing regimes of commercial aluminium alloys. Ⅱ: Al-Cu, Al-Zn-Mg-(Cu), Al-Mg-Si-(Cu), alloys”, Materials Science and Engineering A, Vol.280, pp.91-96, (2000).
49. F. Viana, A. M. P. Pinto, H. M. C. Santos and A. B. Lopez, “Retrogression and re-ageing of 7075 aluminium alloy: microstructure characterization”, Journal of Materials Processing Technology, Vol.92-93, pp.54-59, (1999).
50. W. Feng, X. Baiqing, Z. Yongan, L. Hongwei, Li. Zhihui, L. Qiang, “Microstructure and mechanical properties of spary-deposited Al-Zn-Mg-Cu alloy processed through hot rolling and heat treatment”, Materials science and Engineering A, Vol.518, pp.144-149, (2009).
51. J. Wloka, S. Virtanen, “Detection of nanoscale η-MgZn2 phase dissolution from an Al-Zn-Mg-Cu alloy by electrochemical micro transients”, Surface and Interface Analysis, pp.1219-1225, (2008).
52. Y. H. Zhao, X. Z. Liao, S. Cheng, E. Ma, Yuntian T. Zhu, “Simultaneously increasing the Ductility and strength of Nanostructures Alloys”, Advanced Material, Vol.18, pp.2280-2283, (2006).
53. 黃清添,「析出製程參數對AA7005鋁擠型合金的機械性質與抗應力腐蝕性之影響」,國立台灣科技大學,碩士論文,民國91年。
54. George E. Dieter, Mechanical Metallurgy, Mcgraw-Hill Book Company , London, pp.275-288, (1988).
55. ASM, “Aluminum Alloys”, Metals Handbook, Vol.8, 8th, 1976, pp.259.
56. ASM, “Aluminum Alloys”, Metals Handbook, Vol.8, 8th, 1976, pp.263.
57. D. R. Lide, Handbook of Chemistry and Physics, 71st ed.:CRC Press, (1991).
58. M. Pourbaix, Atlas of Electrochemical Equilibriain Aqueous Solutions: National Association of Corrosion Engineers, (1974).
59. 柯賢文, 腐蝕及其防治: 全華科技圖書股份有限公司, 民國92年。
60. M. G. Fontana, 3rd ed., 1986.
61 . Ziyong Chen, Yuanke Mo and Zuoren Nie, “Effect of Zn Content on the Microstructure and Properties of Super-High Strength Al-Zn-Mg-Cu Alloys”, Metallurgical and Materials Transactions A, Vol.44A, pp.3910-3921, (2013).
62. A. Janghorban, A. Antoni-Zdziobek, M. Lomello-Tafin, C. Antion, Th. Mazingue, A. Pisch, “Phase equilibria in the aluminium-rich side of the Al-Zr system”, J Therm Anal Calorim, Vol.114, pp1015-1020 (2013).
63. C. Gupta, H. Toda, T. Fujika, M. Kobayashi, H. Hoshino, K. Uesugi, A. Takeuchi, Y. Suzuki, “Quantitative tomography of hydrogen precharged and uncharged Al-Zn-Mg-Cu alloy after tensile fracture”, Materials Science & Engineering A, Vol.670, pp300-313 (2016).
64. D. Nguyen, A. W. Thompson and I. M. Bernstein, “Microstructure Effects on Hydrogen Embrittlement in High Purity 7075 Aluminum alloy”, Acta metall., Vol.35, pp.2417-2425, (1987).
65. R. G. Song, W. Dietzel, B. J. Zhang, W. J. Liu, M. K. Tseng, A. Atrens, “Stress corrosion cracking and hydrogen embrittlement of an Al–Zn–Mg–Cu alloy”, Acta Materialia, Vol. 52, pp.4727-4743, (2004).
66. George A. Young Jr. and John R. Scully, “The Effects of Test Temperature, Temper, and Alloyed Copper on the Hydrogen-Controlled Crack Growth Rate of an Al-Zn-Mg-(Cu) Alloy”, Metallurgical and Materials Transactions A, Vol.33A, pp.1167-1181, (2002).
67. H. Kamoutsi, G. N. Haidenmenopoulos, V. Bontozoglou, S. Pantelakis, “Corrosion-induced hydrogen embrittlement in aluminum alloy 2024”, Corrosion Science, Vol.48, pp.1209-1224. (2006).
68. Shigeru Kuramoto, Jun Okahana and Motohiro Kanno, “Hydrogen assisted intergranular crack propagation during environmental embrittlement in an Al-Zn-Mg-Cu alloy”, Materials Transactions, Vol.42, pp.2140-2143, (2001).
69. G. M. Scamans, R. Alani and P. R. Swann, “Pre-exposure embrittlement and stress corrosion failure in al-Zn-Mg alloys”, Corrosion Science, Vol.16, pp.443-459, (1976).
70. 林祿淵,”製成參數對A356鋁合金品質的影響及可靠度的評估”,國立中央大學碩士班畢業論文,民國94年七月。
71. P. S. De, R. S. Mishra, “Microstructural evolution during fatigue of ultrafine grained aluminum alloy”, Materials Science and Engineering:A, Vol.527, pp.7719-7730, (2010).
72. T. C. Schulthess, P. E. A. Turchi, A. Gonis and T.-G. Nieh, “Systematic study of stacking fault energies of ramdom Al-based alloys”, Acta mater., Vol.46, pp.2215-2221, (1998).
73. J. P. Lin, T. C. Lei, X. Y. An, “Dynamic recrystallization during hot compression in AlMg Alloy”, Scripta Metallurgica et Materiala, Vol.26, pp.1869-1874, (1992).
74. Sushanta Kumar Panigrahi, R. Jayaganthan, Vivek Pancholi, “Effect of plastic deformation conditions on microstructural characteristics and mechanical properties of Al 6063 alloy”, Materials and Design, Vol.30, pp.1894-1901, (2009).
75. Teng-Shih Shih, Hwa-Sheng Yong and Wen-Nong Hsu, “Effects of Cryogenic Forging and Anodization on the Mechanical Properties and Corrosion Resistance of AA6066–T6 Aluminum Alloys”, Metals, (2016).
76. Liu Hong, Zhao Gang, Liu Chun-ming, Zuo Liang, “Effects of magnesium content on phase constituents of Al-Mg-Si-Cu alloys”, Transactions of Nonferrous Metals Society of China, Vol.16, pp.376-381, (2006).
77. Sushanta Kumar Panigrahi, R. Jayaganthan, Vivek Pancholi, “Effect of plastic deformation conditions on microstructural characteristics and mechanical properties of Al 6063 alloy”, Materials and Design, Vol.30, pp.194-1901, (2009).
78. Grazyna Mrowka-Nowotnik, “Intermetallic Phases Examination in Cast AlSi5Cu1Mg and AlCu4Ni2Mg2 Aluminium Alloys in As-Cast and T6 Condition”, Recent Trends in Processing and Degradation of Aluminium Alloys, pp.516, (2011).
79. Musa Yildirm, Dursun Ozyurek, “The effects of Mg amount on the microstructure and mechanical properties of Al–Si–Mg alloys”, Materials and Design, Vol.51, pp.767-774, (2013).
80. L. P. Troeger, E. A. Starke Jr, “Particle-stimulated nucleation of recrystallization for grain-size control and superplasticity in an Al–Mg–Si–Cu alloy”, Materials Science and Engineering A, Vol.293, pp.19-29, (2000).
81. Crystopher Brito, Guillaume Reinhart, Henri Nguyen-Thi, Nathalie Mangelinck-Noel, Noe Cheung, Jose E. Spinelli, Amauri Garcia, “High cooling rate cells, dendrites, Microstructural spacings and microhardness in a directionally solidified Al-Mg-Si alloy”, Journal of Alloys and Compounds, Vol.636, pp.145-149, (2015).
82. K. Li, M. Song, Y. Du, X. Fang, “Effect of minor Cu addition on the precipitation sequence of an as-cast Al-Mg-Si 6005 alloy”, Archives of Metallurgy and Materials, Vol.57, pp.457-467, (2012).
83. Gaute Svenningsen, Magnus Hurlen Larsen, John Charles Walmsley, Jan Halvor Nordlien, Kemal Nisancioglu, “Effect of artificial aging on intergranular corrosion of extruded AlMgSi alloy with small Cu content”, Corrosion Science, Vol.48, pp.1528-1543, (2006).
84. Gaute Svenningsen, Magnus Hurlen Larsen, Jan Halvor Nordlien, Kemal Nisancioglu, “Effect of high temperature heat treatment on intergranular corrosion of AlMgSi(Cu) model alloy”, Corrosion Science, Vol.48, pp.258-272, (2006).
85. Gaute Svenningsen, JohnErik Lein, Astrid Bjorgum, Jan Halvor Nordlien, Yingda Yu, Kemal Nisancioglu, “Effect of low copper content and heat treatment on intergranular corrosion of model AlMgSi alloys”, Corrosion Science, Vol.48, pp.226-242, (2006).
86. Gaute Svenningsen, Magnus Hurlen Larsen, Jan Halvor Nordlien, Kemal Nisancioglu, “Effect of thermomechanical history on intergranular corrosion of extruded AlMgSi(Cu) model alloy”, Corrosion Science, Vol.48, pp.3969-3987, (2006).
87. S. S. Su, I. T. H. Chang, W. C. H. Kuo, “Effects of processing conditions on the sintering response of hypereutectic Al-Si-Cu-Mg P/M alloys”, Materials Chemistry and Physics, Vol.139, pp.775-782, (2013).
88. Yanni Wei, Jinglong Li, Jiangtao Xiong, Fusheng Zhang, “Investigation of interdiffusion and intermetallic compounds in Al–Cu joint produced by continuous drive friction welding”, Engneering Science and Technology, an International Journal, Vol.19, pp.90-95, (2016).
89. J. R. Davis, “Aluminum and Aluminum Alloys”, ASM International, pp.351-416, (2001).
90. Feng Wang, Dong Qiu, Zhi-Lin Liu, John A. Taylor, Mark A. Easton, Ming-Xing Zhang, “The grain refinement mechanism of cast aluminium by zirconium”, Acta Materialia, Vol.66, pp.5636-5645, (2013).
91. Y. H. Zhao, X. Z. Liao, Z. Jin, R. Z. Valiev, Y. T. Zhu, “Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing”, Acta Materialia, Vol.52, pp.4589-4599, (2004).
92. T. Ramgopal, P. I. Gouma and G. S. Frankel, “Role of Grain-Boundary Precipitates and Solute-Depleted Zone on the Intergranular Corrosion of Aluminum Alloy 7150”, Corrosion, Vol.58, pp.687-697, (2002).
93. Chandan Mondal, A. K. Mukhopadhyay, “On the nature of T(Al_2 Mg_3 Zn_3) and S(Al_2 CuMg) phases present in as-cast and annealed 7055 aluminum alloy”, Materials Science and Engineering A, Vol.391, pp.367-376, (2005).
94. Fan Xi-Gang, Jiang Da-Ming, Meng Qing-Chang, Zhang Bao-You, Wang Tao, “Evolution of eutectic structures in Al-Zn-Mg-Cu alloys during heat treatment”, Transactions of Nonferrous Metals Society of China, Vol.16, pp.577-581, (2006).
95. Keith E. Knipling, David C. Dunand, David N. Seidman, “Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during aging at 450–600℃”, Acta Materialia, Vol.56, pp.1182-1195, (2008).
96. Feng Wang, Dong Qiu, Zhi-Lin Liu, John A. Taylor, Mark A. Easton, Ming-Xing Zhang, “The grain refinement mechanism of cast aluminium by zirconium”, Acta Materialia, Vol.61, pp.5626-5645, (2013).
97. Lei Li, Yudong Zhang, Claude Esing, Huixue Jiang, Zhihao Zhao, Yubo Zuo, Jianzhong Cui, “Crystallographic features of the primary Al_3Zr phase in as-cast Al-1.36wt% Zr alloy”, Journal of Crystal Growth, Vol.316, pp.172-176, (2011).
98. K. D. Ralston and N. Birbills, “Effect of Grain Size on Corrosion: A Review”, Corrosion, Vol.66, (2010).
99. K. D. Ralston, N. Birbills and C. H. J. Davis, “Revealing the relationship between grain size and corrosion rate of metals”, Scripta Materialia, Vol.63, pp.1201-1204, (2010).
100. Qingqing Sun, Kanghua Chen, Huachan Fang, Jie Xu, Pengxuan Dong, Guiyun Hu, Qiyuan Chen, “Effect of Grain Refinement on Electrochemical Behavior of Al-Zn-Mg-Cu Alloys”, International Journal of Electrochemical Science, Vol.11, pp.5855-5869, (2016).
101. J. F. Chen, G. S. Frankel, J. T. Jiang, W. Z. Shao and L. Zhen, "Effect of age-forming on corrosion properties of an Al-Zn-Mg-Cu alloy”, Materials and Corrosion, Vol.65, pp.670-677, (2014).
102. M. B. Kannan, V.S. Raja,” Enhancing stress corrosion cracking resistance in Al–Zn–Mg–Cu–Zr alloy through inhibiting recrystallization”, Engineering Fracture Mechanics, Vol.77, pp.249-256, (2010).
103. Ying Deng, Zhimin Yin, Kai Zhao, Jiaqi Duan, Jian Hu, Zhenbo He, “Effects of Sc and Zr Microalloying additions and aging time at 120℃ on the corrosion behavior of an Al-Zn-Mg alloy”, Corrosion Science, Vol.65, pp.288-298, (2012).
104. D. K. Xu, N. Birbilis, P. A. Rometsch,” The effect of pre-ageing temperature and retrogression heating rate on the strength and corrosion behaviour of AA7150”, Corrosion Science, Vol.54, pp.17-25, (2012).
105. Li Jin-Feng, Peng Zhuo-Wei, Li Chao-Xing, Jia Zhi-Qiang, Chen Wen-Jing, Zheng Zi-Qiao, “Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium.
106. Li Jin-Feng, Peng Zhuo-Wei, Li Chao-Xing, Jia Zhi-Qiang, Chen Wen-Jing, Zheng Zi-Qiao, “Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments”, Transactions of Nonferrous Metals Society of China, Vol.18, pp.755-762, (2008).
107. Keith E. Kinpling, David C. Dunand, David N. Seidman, “Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during aging at 450–600℃”, Acta Materialia, Vol.56, pp1182-1195, (2008). |