參考文獻 |
[1] P. C. Huang, Z. M. Tsai, K. Y. Lin, and H. Wang, “17–35 GHz Broadband, High Efficiency pHEMT Power Amplifier Using Synthesized Transformer Matching Technique,” in IEEE MTT, 2012, vol. 60, pp. 112-119.
[2] Q. J. Gu, Z. Xu, and M. F. Chang, “Two-way current-combining W-band power amplifier in 65-nm CMOS,” IEEE Trans. Microw. Thoery Techn., May 2012, vol. 60, no. 5, pp. 1365–1374.
[3] D. Zhao, P. Reynaert, “A 40-nm CMOS E-Band 4-Way Power Amplifier with Neutralized Boostrapped Cascode Amplifier and Optimum Passive Circuits”, IEEE MTT, vol. 63, NO. 12, Dec. 2015, pp. 4083-4089.
[4] C. Campbell et al., ”A wideband power amplifier MMIC utilizing GaN on SiC HEMT technology,” IEEE J Solid-State Circuits, vol. 44, no. 10, Oct. 2009, pp. 2640-2647.
[5] J. Komiak et al., ”Decade bandwidth 2 to 20 GHz GaN HEMT power amplifier MMICs in DFP and no FP technology,” IEEE MTT-S Int. Microw. Symp. Dig., pp. 1-4, Jun. 5-10, 2011.
[6] M.-C. Chuang, P.-S. Wu, M.-F. Lei, and H. Wang, “A miniature15–50-GHz medium power amplifier,” in IEEE Radio Frequency Integrated Circuits Symp. Dig., Jun. 11–13, 2006, pp. 471–474.
[7] M. Coffey et al., “A 4.2-W 10-GHz GaN MMIC Doherty power amplifier,” in Proc. IEEE Compound Semiconductor Integr. Circuit Symp., Oct. 2015, pp. 1–4.
[8] C. Park, D. H. Lee, J. Han, and S. Hong, “Tournament-Shaped Magnetically Coupled Power-Combiner Architecture for RF CMOS Power Amplifier”, in IEEE TMTT, vol. 55 NO. 10, Oct. 2007, pp. 2034- 2042.
[9] U. Schmid et al., ”Ultra-wideband GaN MMIC chip set and high power amplifier module for multi-function defense AESA applications,” IEEE Trans. Microw. Theory Tech., vol. 61, no. 8, Aug. 2013, pp. 3043-305.
[10] G. Mouginot et al., ”Three stage 6-18 GHz high gain and highpower amplifier based on GaN technology,” IEEE MTT-S Int. Microw. Symp. Dig., pp. 1392-1395, May. 23-28,2010.
[11] A. P. Freundorfer, Y. Jamani and C. Falt, “A Ka-band GaInP/GaAs HBT four-stage LNA,” IEEE Microw.and Millimeter-Wave Monolithic Circuits Symp. Dig.,Jun. 1996, pp. 141-144
[12] C. Pobanz, M. Matloubian, L. Nguyen, Michael Case, Ming Hu, M. Lui, C. Hooper, and P. Janke, “A high gain, low power MMIC LNA for Ka-band using InP HEMTs,” in Proc.IEEE Radio Freq. Integr. Circuits Symp. Dig., Jun. 1999, pp. 149–152.
[13] R. Isobe, C. Wong, A. Potter, T. Long, M. Delaney, R. Rhodes, D. Jang, N. Loi, and Le Minh, “Q-band v-band MMIC chip set using 0.1 μm millimeter-wave low noise InPHEMTs,” in IEEE MTT-S Int. Microw. Symp. Dig., May 1995, vol. 3, pp. 1133–1136.
[14] S. Long, L. Escotte, J. Graffeuill, P. Fellon and D. Roques, “Ka-band coplanar low-noise amplifier design with power PHEMTs,” Eur. Microw. Conf., pp. 17–20, Oct. 2003.
[15] K. H. G. Duh, S. M. J. Liu, S. C. Wang, P. Ho, and P. C. Chao, “High performance Q-band 0.15 μm InGaAs HEMT MMIC LNA,” IEEE Microw. And Millimeter-Wave Monolithic Circuits Symp.Dig., Jun. 1993, pp. 99–102.
[16] P-H. Ho, C.-C. Chiong, and H. Wang, “An ultra-low-power Q-band LNA with 50% bandwidth in WIN GaAs 0.1-μm pHEMT process,” in Asia-Pacific Microw.Conf., Nov. 2013, pp. 713–715.
[17] R. Limacher, et al., “Broadband low-noise amplifiers for K-and Q-bands using 0.2 μm InP HEMT MMIC technology”, in Proc. IEEE CSIC Symp., pp.305-308, Oct. 2004.
[18] C.-H. Wu, and N.-Y. Wu, “Design of low power up-conversion self-oscillating mixer,” in Proc. China-Japan Joint Microw. Conference, (CJMW) pp. 1–4, Apr. 2011.
[19] C.-H. Wu, and G.-X. Jian, “Design of up conversion mixer with enhanced transconductance stage and low power consumption oscillator,” in Proc. International Conf. on Signals and Electronic Systems, pp. 229–232, Sept. 2010.
[20] K. W. Kobayashi, A. K. Oki, D. K. Umemoto, T. R. Block, and D. C. Streit, “A novel self-oscillating HEMT–HBT cascode VCO-mixer using an active tunable inductor,” IEEE J. Solid-State Circuits, vol. 33, no. 6, pp. 1231–1240, Jun. 1998.
[21] J.-Y. Kim; W.-Y. Choi, “30 GHz CMOS self-oscillating mixer for self-heterodyne receiver application,” IEEE Microw. Compon. Lett., vol. 20, no. 6, pp. 334–336, June. 2010.
[22] F. Starzer, P.-H. Forstner, L. Maurer, and A. Stelzer, “A 21-GHz self-oscillating down-converter mixer,” 12th Topical Meeting on Silicon Monolithic Integrated Circuits in RF systems (SiRF), Jan. 2012, pp. 93–96.
[23] T.-P. Wang, C.-C. Chang, R.-C. Liu, M.-D. Tsai, K.-J. Sun, Y.-T. Chang, L.-H. Lu, and H. Wang, “A low-power oscillator mixer in 0.18-/SPI mu/m CMOS technology”, IEEE Trans. Microw. Theory Techn., vol. 54, no. 1, Jan. 2006, pp. 88–95.
[24] Y. C. Hsiao, C. Meng, and Y. H. Peng, “Broadband CMOS Schottky-Diode Star Mixer Using Coupled-CPW Marchand Dual-Baluns”, IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, vol. 27, no. 5, pp. 500-502, May, 2017.
[25] H.-K. Chiou and J.-Y. Lin, “Symmetric offset stack balun in standard 0.13 μm CMOS technology for three broadband and low-loss balanced passive mixer design”, IEEE Trans. Microw. Theory Techn., vol. 59, no. 6, Jun. 2011, pp. 1529–1538.
[26] H.-K. Chiou and T.-Y. Yang, “Low-loss and broadband asymmetric broadside-coupled balun for mixer design in 0.18 μm CMOS technology,” IEEE Trans. Microw. Theory Techn., vol. 56, no. 4, Apr. 2008, pp. 835–848.
[27] http://www.iue.tuwien.ac.at/phd/brech/ch_6_1.htm
[28] Y. H. Hasiao, Z. M. Tsai, H. C. Liao, J. C. Kao, and H. Wang, “Millimeter-Wave CMOS Power Amplifiers with High Output Power and Wideband Performances”, IEEE MTT, vol. 61, NO. 12, Dec. 2013, pp. 4520-4533.
[29] C. Y. Law and A.-V. Pham, “A high gain 60 GHz power amplifier with 20 dBm output power in 90 nm CMOS,” in Int. Solid-State Circuits Conf. Tech. Dig., Feb. 2010, pp. 426–427.
[30] J.-W. Lai and A. Valdes-Garcia, “A 1 V 17.9 dBm 60 GHz power amplifier in standard 65 nm CMOS,” in Int. Solid-State Circuits Conf. Tech. Dig., pp. 424–425, Feb. 2010.
[31] Y. Zhao, J. R. Long, andM. Spirito, “A 60 GHz-band 20 dBm power amplifier with 20% peak PAE,” in IEEE RFIC Symp., pp. 1–4, Jun. 2011.
[32] M. Bohsali and A. M. Niknejad, “Current combining 60 GHz CMOS power amplifiers,” in RFIC Symp., May 2009, pp. 31–34.
[33] U. R. Pfeiffer and D. Goren, “A 23-dBm 60-GHz distributed active transformer in a silicon process technology,” IEEE Trans. Microw. Theory Tech., vol. 55, no. 5, May 2007, pp. 857–865.
[34] Y.-N. Jen, J.-H. Tsai, T.-W. Huang, and H. Wang, “Design and analysis of a 55–71 GHz compact and broadband distributed active transformer power amplifier in 90-nm CMOS process,” IEEE Trans. Microw. Theory Tech., vol. 57, no. 7, Jul. 2009, pp. 1637–1646.
[35] D. Sandstrom, B. Martineau,M. Varonen,M. Karkkainen, A. Cathelin, and K. A. I.Halonen, “94GHz power-combining power amplifier with 13 dBm saturated output power in 65 nm CMOS,” in IEEE RFIC Symp., pp. 1–4, Jun. 2011.
[36] H. Jia, B. Chi, L. Kuang, and Z. Wang, “A W-Band Power Amplifier Utilizing a Miniaturized Marchand Balun Combiner” IEEE Trans. Microw. Thoery Techn., Feb 2015, vol. 63, no. 2, pp. 719–625.
[37] N. Marchand, “Transmission-line conversion transformers,” Electronics, vol. 17, pp. 142–146, Dec. 1944.
[38] H. C. Yeh, C. C. Chiong, S. Aloui, and H. Wang, “Analysis and Design of Millimeter-Wave Low-Voltage CMOS Cascode LNA with Magnetic Coupled Technique”, in IEEE MTT vol. 60 no. 12, Dec. 2012, pp. 4066-4079.
[39] Razavi, RF Microelectronics, 2nd Ed.., Upper Saddle River, NJ, USA, Pearson, 2012.
[40] K. Kanaya, K. Kawakami, T. Hisaka, T. Ishikawa, and S. Sakamoto, “A 94 GHz High Performance Quardruple Subharmonic Mixer MMIC”, in IEEE MTTS Digest, 2002, pp. 1249-1252
[41] C. S. Lin, P. S. Wu, M. C. Yeh, J. S. Fu, H. Y. Chang, K. Y. Lin, H. Wang, “Analysis of Multiconductor for Miniature MMIC Design”, in IEEE MTT, 2007, vol. 55, pp. 1190-1199.
[42] J. C. Kao1, C. Meng, H. J. Wei1, and G. W. Huang, “60-GHz SiGe BiCMOS Dual-Conversion Down-Converter Schottky Diode RF Mixer and Analog Gilbert IF Mixer with Microwave Quadrature Generator”, in Silicon Monolithic Integrated Circuits in RF Systems (SiRF), 4th April, 2016.
[43] TS1401001 WIN NP25-00 Technology Summary--28V Operation 0.25μm High Power GaN&SiC HEMT Technology(Rev.3)
[44] https://read01.com/0zGKm.html
[45] D. M. Pozar, Microwave Engineering, 3rd Ed.. New York, NY, USA, Wiley, 2005.
[46] Y.-J. E. Chen, L.-Y. Yan, and W.-C. Yeh, “An integrated wideband power amplifier for cognitive radio,” IEEE Trans. Microw. Theory Tech., vol. 55, no. 10, Oct. 2007, pp. 2053–2058.
[47] J. J. Komiak, W. Kong, K. Nichols, “High Efficiency Wideband 6 to 18 GHz PHEMT Power Amplifier MMIC”, Microwave Symposium Digest, 2002 IEEE MTT-S International, June. 2002, pp. 905-907
[48] I. Aoki, S. D. Kee, D. B. Rutledge, and A. Hajimiri, “Distributed active transformer—A new power-combining and impedance-transformation technique,” IEEE Trans. Microw. Theory Tech., vol. 50, no. 1, Jan. 2002, pp. 316–331.
[49] R. Quaglia, V. Camarchia, T. Jiang, M. Pirola, S. D. Guerrieri, and B. Loran, “K-Band GaAs MMIC Doherty Power Amplifier for Microwave Radio with Optimized Driver”, in IEEE MTT, vol. 62, NO. 11, Nov. 2014, pp. 2518-2525.
[50] Y. Yoshihara, R. Fujimoto, N. Ono, T. Mitomo, H. Hoshino, and M.Hamada, “A 60-GHz CMOS power amplifier with marchand balun-based parallel power combiner,” in IEEE Asian Solid-State Circuits Conf. Tech. Dig., Nov. 2008, pp. 121–124.
[51] M. Thian, M. Tiebout, N. B. Buchanan, V. F. Fusco, and F. Dielacher, “A 76–84 GHz SiGe power amplifier array employing low-loss four-way differential combining transformer,” IEEE Trans. Microw. Theory Techn. , Feb. 2013, vol. 61, no. 2, pp. 931–938.
[52] D. Sandstrom, B. Martineau,M. Varonen,M. Karkkainen, A. Cathelin, and K. A. I. Halonen, “94GHz power-combining power amplifier with 13 dBm saturated output power in 65 nm CMOS,” in IEEE RFIC Symp., pp. 1–4, Jun. 2011.
[53] W. Tai and D. S. Ricketts, “A W-band 21.1 dBm power amplifier with an 8-way zero-degree combiner in 45 nm SOI CMOS,” in Proc. IEEE Int. Microw. Symp., Tampa, FL, USA, pp. 1–3, Jun. 2014.
[54] C. E. Patterson, D. Dawn, and J. Papapolymerou, “A W-Band CMOS PA Encapsulated in an Organic Flip-Chip Package”, IEEE MTT-S International, 2012, pp 1-3.
[55] P. Huang, T. W. Huang, H. Wang, E. W. Lin, Y. Shu, G. S. Dow, R. Lai, M. Biedenbender, and J. H. Elliott, “A 94 GHz 0.35 W Power Amplifier Module,” IEEE Trans. Microwave Theory Tech, vol. 45, Dec. 1997, pp. 2418–2423. |