參考文獻 |
1.F.C. Chang, W.S. Hwang, C.H. Lee, C.F. Wu and J.B. Yang,
“Forging condition for removing porosities in the hybrid
casting and forging process of 7075 aluminum alloy
casting”, Materials Transactions, Vol.45, pp.1886-1890,
2004.
2.S. Fujikawa, Y. Kitamura and S. Shimamura, “Application of
numerical methods for the aluminum casting/forging
process”, Journal of Materials Processing Technology,
Vol.27, pp.93-110, 1991.
3.日本輕金屬學會委員“鋁合金之組織與性質”,日本輕金屬學
會,pp278-279,1991。
4.L. Zhen, W.D. Fei, S.B. Kang and H.W. Kim, “Precipitation
behaviour of Al-Mg-Si alloys with high silicon content”,
Journal of Materials science, pp.1895-1902,1997.
5.M. Takeda, F. Ohkubo, T. Shirai and K. Fukui,
“Precipitation behavior of Al-Mg-Si ternary alloys”,
Materials Science Forum, Vol.217-222, pp.815-820, 1996.
6.G.A. Edwards, K. Stiller, G.L. Dunlop and M.J. Couper,
“The precipitation Sequence in Al-Mg-Si alloys”, Acta
mater, Vol.46, No. 11, pp.3893-3904, 1998.
7.D.J. Chakrabarti and D.E. Laughlin, “Phase relations and
precipitation in Al-Mg-Si alloys with Cu additions”,
Progress in Materials Science, Vol.49, pp.389-410, 2004.
8.K. Matsuda, D. Teguri, Y. Uetani, T. Sato and S. Ikeno,
“Cu-segregation at the Q′/α-Al interface in Al-Mg-Si-Cu
alloy”, Scripta Materialia, pp.833-837, 2002.
9.K. Matsuda, D. Teguri, T. Sato, Y. Uetani and S. Ikeno,
“Cu segregation around metastable phase in Al-Mg-Si Alloy
with Cu”, Materials Transactions, Vol.48, No. 5,
pp.967-974, 2007.
10.Y. Birol, “Precipitation during homogenization cooling in
AlMgSi alloys”, Transactions of Nonferrous Metals Society
of China, Vol.23, pp.1875-1881, 2013.
11.A. Woznicki, D. Lesniak, G. Wloch and B. Leszczynska-
Madej, A. Wojtyna,“The effect of homogeneous conditions
on the structure and properties of 6082 alloy billets”,
Archives of Metallurgy and Materials, Vol.60, 2015.
12.A.K. Vasudevan and R.D. Doherty, “Grain boundary ductile
fracture in precipitation hardened aluminum alloys”, Acta
Metallurgica, Vol.35, pp.1193-1219, 1987.
13.Y. Du, Y.A. Chang, B. Huang, W. Gong, Z. Jin, H. Xu, Z.
Yuan, Y. Liu, Y. He and F. Y. Xie, “Diffusion
coefficients of some solutes in fcc and liquid Al:
critical evaluation and correlation”, Materials Science
and Engineering, Vol.A363, pp.140-151, 2003.
14.M. Nicolas, “Precipitation evolution in an Al-Zn-Mg alloy
during non-isothermal heat treatments and in the heat-
affected zone of welded joints”, Institut National
Polytechnique de Grenoble, pp.144-148, 2002.
15.B. Ihsan, “Thermochemical data of pure substances”,
Weinheim, 1995.
16.T. Yabe, M. Enoki and H. Ohtani, “Thermodynamic analysis
of phase separation in the Al-Cu binary fcc phase”,
Journal of the Japan Institute of Metals, Vol.80,
pp.370-378, 2016.
17.B. Pyttel, D. Schwerdt and C. Berger, “Very high cycle
fatigue – Is there a fatigue limit?”, International
Journal of Fatigue, Vol.33, pp.49-58, 2011.
18.T. Sakai, Y. Sato and N. Oguma, “Characteristic S-N
properties of high-carbon-chromium-bearing steel under
axial loading in long-life fatigue”, Fatigue & Fracture
of Engineering Materials & Structures, Vol.25, pp.765-773,
2002.
19.Y. Takahashi, T. Shikama, S. Yoshihara, T. Aiura and H.
Noguchi “Study on dominant mechanism of high-cycle
fatigue life in 6066-T6 aluminum alloy through
microanalyses of microstructurally small cracks”, Acta
Materialia, Vol.60, pp.2554-2567, 2012.
20.T. Shikama, Y. Takahashi, L. Zeng, S. Yoshihara, T. Aiura,
K.Higashida and H. Noguchi, “Distinct fatigue crack
propagation limit of new precipitation-hardened
aluminum alloy”, Scripta Materialia, Vol.67, Issue 1,
pp.49-52, 2012.
21.T. Zhai, X.P. Jiang, J.X. Li, M.D. Garratt, G.H. Bray,
“The grain boundary geometry for optimum resistance to
growth of short fatigue cracks in high
strength Al-alloys”, International Journal of Fatigue,
Vol.27, pp.1202-1209, 2005.
22.M. Cabibbo, E. Evangelista and M. Vedani, “Influence of
severe plastic deformations on secondary phase
precipitation in a 6082 Al-Mg-Si alloy”, Metallurgical
and Materials Transactions A, Vol.36, Issue.5,
pp.1353-1364, 2005.
23.M. Cabibbo, “Microstructure strengthening mechanisms in
different equal channel angular pressed aluminum alloys”,
Materials Science & Engineering: A, Vol.560, pp.413-432,
2013.
24.R.E. Reed-Hill, “Alternating stress parameters”,
Physical Metallurgy Principles 3^th Edition, pp.710-713,
2010.
25.S.K. Panigrahi, R. Jayaganthan and V. Pancholi, “Effect
of plastic deformation conditions on microstructural
characteristics and mechanical properties of Al
6063 alloy”, Materials and Design, Vol.30, pp.1894-1901,
2009.
26.S.K. Panigrahi, R. Jayaganthan and V. Chawla, “Effect of
cryorolling on microstructure of Al-Mg-Si alloy”,
Materials Letters, Vol.62, pp.2626-2629, 2008.
27.楊樺成, 「深冷變形與陽極處理對6066-T6機械性質的影響」, 國
立中央大學, 碩士論文, 民國104年.
28.T.S. Shih, H.S. Yong and W.N. Hsu, “Effect of cryogenic
forging and anodization on the mechanical properties and
corrosion resistance of AA6066-T6 aluminum alloys”,
Metals, Vol.6,2016.
29.J.A. Nucci, R.R. Keller, D.P. Field and Y. Shacham-
Diamand, “Grain boundary misorientation angles and
stress-induced voiding in oxide passivated copper
interconnects”, Applied Physics Letters, Vol.70,
pp.1242-1244, 1997.
30.M.H. Huang, M. Liao and J.A. Szpunar, “Fatigue cracking
behavior in aluminum 7050”, 12th International Conference
on Fracture 2009, Vol.7, pp.5290-5298, 2009.
31.P. Paris and F. Erdogan, “A critical analysis of crack
propagation laws”, Journal of Basic Engineering, Vol.85,
pp.528-534, 1962.
32.R.O. Ritchie, “Near-threshold fatigue-crack propagation
in steels”, International Metals Reviews, pp.205-230,
1979.
33.R.O. Ritchie and S. Suresh, “Some considerations on
fatigue crack closure at near-threshold stress intensities
due to fracture surface morphology”, Metallurgical
Transactions A, Vol.13A, pp.937-940, 1982.
34.W.C. Connors, “Fatigue striation spacing analysis”,
Materials Characterization, Vol.33, pp.245-253.1994.
35.K. Shiozawa, L.L. Tao and S. Ishihara, “Subsurface
fatigue crack initiation behavior and S-N curve
characteristics in high carbon-chromium bearing steel”,
材料, Vol.48, pp.1095-1100, 1999.
36.K. Shiozawq, L. Lu and S. Ishihara, “S-N curve
characteristics and subsurface crack initiation behavior
in ultra-long life fatigue of a high carbon-chromium
bearing steel”, Fatigue & Fracture of Engineering
Materials & Structures, Vol.24, pp.781-790, 2001.
37.M.D. Freitas, L. Reis, M.D. Fonte and B. Li, “Effect of
steady torsion on fatigue crack initiation and propagation
under rotating bending : Multiaxial fatigue and mixed-mode
cracking”, Engineering Fracture Mechanics, Vol.78,
pp.826-835, 2011.
38.Y. Murakami, S. Kodama and S. Konuma, “Quantitative
evaluation of effects of non-metallic inclusions on
fatigue strength of high strength steels. I:Basic fatigue
mechanism and evaluation of correlation between the
fatigue fracture stress and the size and location of non-
metallic inclusions”, International Journal of Fatigue,
Vol.11, pp.291-298, 1989.
39.W.Z. Han, Y. Chen, A. Vinogradov and C.R. Hutchinson,
“Dynamic precipitation during cyclic deformation of an
underaged Al-Cu alloy”, Materials Science and Engineering
A, Vol.528, Issue.24, pp.7410-7416, 2011.
40.C.C. Chen, J.H. Chen and C.G. Chao, “Post-treatment
method of producing ordered array of anodic aluminum oxide
using general purity commercial(99.7%) aluminum”,
Japanese Journal of Applied Physics, Vol.44, pp.1529-1533,
2005.
41.H. Masuda and F. Hasegwa, “Self-ordering of cell
arrangement of anodic porous alumina formed in sulfuric
acid solution”, J. Electrochem. Soc., Vol.144, L127-L130,
1997.
42.K. Schwirn, W. Lee, R. Hillebrand, M. Steinhart, K.
Nielsch and U. Gosele, “Self-ordered anodic aluminum
oxide formed by H_2 SO_4 hard anodization”, ACS Nano,
Vol.2, pp.302-310, 2008.
43.M. Noormohammadi and M. Moradi, “Structural engineering
of nanoporous alumina by direct cooling the barrier layer
during the aluminum hard anodization”, Materials
Chemistry and Physics, Vol.135, pp.1089-1095, 2012.
44.X. Zhou, G.E. Thompson, P. Skeldon, G.C. Wood, K. Shimizu
and H. Habazaki, Corrosion Sci. 41(1999)1599.
45.Y. Liu, P. Skeldon, G.E. Thompson, H. Habazaki,Corros.
Sci. 44(2002)1133.
46.H. Habazaki, X. Zhou, K. Shimizu, P. Skeldon, G.E.
Thompson and G. C. Wood, Electrochim. Acta 42(17)
(1997)2627.
47.A.K. Mukhopadhyay and A.K. Sharma, Surf. Coat. Technol.
92(1997)212.
48.L.E. Fratila-Apachitei, F.D. Tichelaar, G.E. Thompson, H.
Terryn, P. Skeldon, J. Duszczyk and L. Katgerman,
Electrochim. Acta 49(2004)3169.
49.Y.S. Huang, T.S. Shih and C.E. Wu, “Electrochemical
behavior of anodized AA6063-T6 alloys affected by matrix
structures”, Applied surface Science, Vol.264,
pp.410-418, 2013.
50.T.S. Shih, T.H. Lee and Y.J. Jhou, “The effect of
anodization treatment on the microstructure and fatigue
behavior of 7075-T73 aluminum alloy”, Materials
Transactions, Vol.55, pp.1280-1285, 2014.
51.廖庭瑋, 「深冷鍛造與陽極處理對鋁合金7075的疲勞性質及微結構
影響研究」, 國立中央大學, 碩士論文, 民國103年.
52.L. Iglesias-Rubianes, P. Skeldon, G.E. Thompson, U.
Kreissig, D. Grambole, H. Habazaki and K. Shimizu,
“Behaviour of hydrogen impurity in aluminum alloys during
anodizing”, Thin Solid Films, Vol.424, pp.201-207, 2003.
53.I.M. Robertson and H.K. Birnbaum, “Dislocation mobility
and hydrogen-A BRIEF REVIEW”
54.P.J. Ferreira, I.M. Robertson and H.K. Birnbaum,
“Hydrogen effects on the character of dislocations in high
purity aluminum”, Acta Metallurgica, Vol.47,
pp.2991-2998, 1999.
55.F.J. Humphreys and M. Hatherly, “Recrystallization and
Related annealing phenomena”, pp.131, 1995.
56.B. Lonyuk, I. Apachitei and J. Duszczyk, “The effect of
oxide coatings on fatigue properties of 7475-T6 aluminum
alloy”, Surface & Coatings Technology, Vol.201, Issue.21,
pp.8688-8694, 2007.
57.M. Hajihashemi, N. Yazdian, M. Ajabshiri and M.A.
Asadabad, “The effect of chromium and anodizing coating
on fatigue characteristics of 7075-T6 Al alloys used in
aerospace industries”, Journal of Materials Science and
Engineering with Advanced Technology, Vol. 12, pp.39-47,
2015.
58.A. Janghorban, A. Antoni-Zdziobek, M. Lomello-Tafin, C.
Antion, Th. Mazingue amd A. Pisch, “Phase equilibria in
the aluminium-rich side of Al-Zr system”, Journal of
Thermal Analysis and Calorimetry, Vol.114, pp.1015-1020,
2013.
59.魏千竣, 「鑄/鍛鋁合金的微結構對機械性質的影響」, 國立中央
大學, 碩士論文, 民國105年.
60.L. Hong, Z. Gang, L.C. Ming and Z. Liang, “Effect of
magnesium content on phase constituents of Al-Mg-Si-Cu
alloys”, Transactions of Nonferrous Metals Society of
China, Vol.16, pp.376-381, 2006.
61.M. Yildirm and D. Ozyurek, “The effect of Mg amount on
the microstructure and mechanical properties of Al-Si-Mg
alloys”, Materials and Design, Vol.51, pp.767-774, 2013.
62.L.P. Troeger and E.A. Starke Jr, “Particle-stimulated
nucleation of recrystallization for grain-size control and
super-plasticity in an Al-Mg-Si-Cu alloy”, Materials
Science and Engineering A, Vol.293, pp.19-29, 2000.
63.G. Mrowka-Nowotnik, “Intermetallic phases examination in
cast AlSi5Cu1Mg and AlCu4Ni2Mg2 aluminium alloys in as-
cast and T6 condition”, Recent Trends in Processing and
Degradation of Aluminium Alloys, pp.20-40, 2011.
64.H.J. Kim, J.Y. Lee, K.W. Pail, K.W. Koh, J. Won, S. Choe,
J. Lee, J.T. Moon and Y.J. Park, “Effect of Cu/Al
intermetallic compound (IMC) on copper wire and aluminum
pad bondability”, IEEE Transactions on Components and
Packaging Technologies, Vol.26, pp.367-374, 2003.
65.R.P. Wei, C.M. Liao and M. Gao, Metall. Mater. Trans. A
29A (1998) 1153.
66.M.K. Cavanaugh, R.G. Buchheit and N. Birbilism Eng. Fract.
Mech., 76, 641 2009.
67.N. Birbilis and R.G. Buchheit, “Electrochemical
characteristics of intermetallic phase in aluminum alloys
an experimental survey and discussion, Journal of The
Electrochemical Society, Vol.152, B140-B151, 2005.
68.A.C. Vieira, A.M. Pinto, L.A. Rocha and S. Mischler,
“Effect of Al2Cu precipitates size and mass transport on
the polarization behavior of age-hardened Al-Si-Cu-Mg
alloys in 0.05M NaCl, Electrochimica Acta, Vol.56,
pp.3821-3828, 2001. |