博碩士論文 104326007 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:5 、訪客IP:3.149.255.162
姓名 陳解文(Jie-Wen Chen)  查詢紙本館藏   畢業系所 環境工程研究所
論文名稱 以靜電紡絲製備奈米纖維濾材並應用於過濾細及超細懸浮微粒
(Preparation of Nanofiber Filters by Electrospinning and Application to Filtration of Fine and Ultrafine Fine Particles)
相關論文
★ 污水處理廠逸散微粒之物理、化學及生物特性分析★ 台北都會區PM1.0微粒物理特徵描述與含碳氣膠來源分析
★ 以無人飛行載具(UAV)平台探討空氣污染物之垂直分佈特徵及搭載之氣膠儀器性能評估
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   至系統瀏覽論文 (2027-1-25以後開放)
摘要(中) 利用奈米纖維濾材過濾為有效處理空氣中細及超細懸浮微粒之控制技術。在
眾多製備奈米纖維之技術中,靜電紡絲為一種簡單且可行之技術。可藉由調整不同操作參數而改變其帄均纖維直徑、纖維基重、濾材厚度以及填充密度等,以評估奈米纖維濾材各種物理特性與氣膠過濾表現之關係。
在眾多用以靜電紡絲之原料物質中,聚丙烯腈(Polyacrylonitrile,PAN)為一種具有強韌特性之聚合物,過去文獻顯示其所製成之電紡濾材,其帄均纖維直徑大多介於250 奈米以上,雖有不錯之氣膠過濾表現,但卻鮮少有關於藉由調整電紡參數製備出 PAN 奈米纖維濾材並應用於評估氣膠過濾之表現。因此本研究詴利用靜電紡絲系統製備 PAN 奈米纖維濾材,並在不同溶液濃度、施加電壓以及收集時間等電紡操作參數下以不織布作為基材製成過濾濾材。實驗將利用掃描式電子顯微鏡觀察帄均纖維直徑、濾材厚度、纖維基重以及填充密度等濾材之物理特性,研究各操作參數對於製備奈米纖維之影響。本研究並實驗測詴各製程之電紡奈米纖維濾材,以同時考慮微粒貫穿率及濾材壓降之過濾效能指標(Quality Factor, qF)評估濾材對於細及超細懸浮微粒之過濾表現。藉由綜合探討電紡參數與過濾效能指標之關係,以期獲得能夠達到較佳過濾表現之 PAN 濾材之製備參數。
摘要(英) Filtration is a control technique for effectively handling fine and ultrafine aerosols in the air.Electrospinning is a simple and feasible technique among many techniques for preparing nanofibers. The average fiber diameter, fiber basis weight, filter thickness, and packing density can be changed by adjusting different operating parameters to evaluate the relationship between the various physical properties of the nanofiber filter and the performance of the aerosol filter.

Among many polymer materials used for electrospinning, polyacrylonitrile (PAN) is a polymer with strong properties. In the past, the literature showed that although the
electrospinning filter has a good performance for aerosol filtration, the average fiber diameter is mostly more than 250 nm. However, in the past, there was a few studies
about preparation of PAN nanofiber filters by adjusting electrospinning parameters and application in evaluation to performance of the aerosol filter.

Therefore, in this study, PAN nanofiber filters were prepared by using an electrospinning system, and non-woven fabrics were used as the filter media for adjusting electrospinning operation parameters such as the applied voltage and the collection time. Experiments will use scanning electron microscopy to observe the physical characteristics of the average fiber diameter, filter thickness, fiber basis weight, and packing density, and to study the effect of various operating parameters on the preparation of nanofibers. In this study, the electrospinning nanofiber filter of each process was tested and the filter performance of the filter for fine and ultrafine aerosols was evaluated by considering the particle penetration and filter pressure drop (Quality Factor, qF). By comprehensively discussing the relationship between
electrospinning parameters and quality factor, in order to obtain the preparation parameters of PAN filter materials that can achieve better filtration performance.
關鍵字(中) ★ 靜電紡絲纖維濾材
★ PAN 奈米纖維
★ 過濾奈米微粒
關鍵字(英) ★ Electrospinning Fiber Filters
★ PAN Nanofibers
★ Nanoparticles filtration
論文目次 目錄
中文摘要......................................................................................................................... i
Abstract .......................................................................................................................... ii
致謝.............................................................................................................................. iii
目錄............................................................................................................................... iv
圖目錄........................................................................................................................... vi
表目錄........................................................................................................................ viii
第一章 前言................................................................................................................ 1
1.1 奈米微粒之影響............................................................................................. 1
1.2 濾材過濾與奈米纖維濾材............................................................................. 1
1.3 靜電紡絲......................................................................................................... 2
1.4 研究目的......................................................................................................... 2
第二章 文獻回顧.......................................................................................................... 3
2.1 靜電紡絲原理................................................................................................. 3
2.2 靜電紡絲參數................................................................................................. 4
2.2.1 溶液參數.............................................................................................. 4
2.2.2 製程參數.............................................................................................. 7
2.2.3 環境參數.............................................................................................. 9
2.3 聚丙烯腈....................................................................................................... 10
2.4 氣膠微粒過濾理論....................................................................................... 10
2.4.1 總收集效率......................................................................................... 13
2.5 過濾特性指標............................................................................................... 13
2.6 過濾效能指標............................................................................................... 14
第三章 研究方法........................................................................................................ 16
3.1 實驗流程與步驟........................................................................................... 16
3.2 實驗方法與材料........................................................................................... 17
3.2.1 實驗藥品............................................................................................. 17
3.2.2 實驗儀器............................................................................................. 17
3.3 實驗內容....................................................................................................... 19
3.3.1 溶液之配製........................................................................................ 19
3.3.2 靜電紡絲製備奈米纖維濾材............................................................ 19
3.3.3 奈米纖維濾材表面特性分析............................................................ 19
3.3.4 濾材過濾表現之評估......................................................................... 20
第四章 結果與討論.................................................................................................... 21
4.1 PAN 奈米纖維濾材 ....................................................................................... 21
4.1.1 溶液濃度及施加電壓參數................................................................ 21
4.1.2 電紡收集時間參數............................................................................ 40

第五章 結論與建議.................................................................................................... 49
參考文獻...................................................................................................................... 50
參考文獻 Barhate, R. S., et al. (2011). "Porous nano- and microfibrous polymeric membrane
material for catalytic support." Chemical Engineering Research and Design 89(6):
621-630.

Choi, H.-J., et al. (2014). "Preparation of electrospun polyurethane filter media and
their collection mechanisms for ultrafine particles." Journal of the Air & Waste
Management Association 64(3): 322-329.

Givehchi, R., et al. (2015). "The effect of electrostatic forces on filtration efficiency of
granular filters." Powder Technology 277: 135-140.

Gu, S. Y., et al. (2005). "Process optimization and empirical modeling for electrospun
polyacrylonitrile (PAN) nanofiber precursor of carbon nanofibers." European Polymer
Journal 41(11): 2559-2568.

Han, S. O., et al. (2005). "Ultrafine porous fibers electrospun from cellulose
triacetate." Materials Letters 59(24-25): 2998-3001.

Heikkila, P. and A. Harlin (2009). "Electrospinning of polyacrylonitrile (PAN) solution:
Effect of conductive additive and filler on the process." Express Polymer Letters 3(7):
437-445.

Heikkila, P., et al. (2007). "Electrospun PA-66 coating on textile surfaces." Textile
Research Journal 77(11): 864-870.

Hung, C.-H. and W. W.-F. Leung (2011). "Filtration of nano-aerosol using nanofiber
filter under low Peclet number and transitional flow regime." Separation and
Purification Technology 79(1): 34-42.

Kim, C. S., et al. (2006). "Filtration efficiency of a fibrous filter for nanoparticles."
Journal of Nanoparticle Research 8(2): 215-221.

Klemm, D., et al. (2005). "Cellulose: Fascinating biopolymer and sustainable raw


51





material." Angewandte Chemie-International Edition 44(22): 3358-3393.

Lan, T., et al. (2014). "Ultrafine cellulose triacetate mats electrospun by using
co-solvent of DMSO/chloroform system." Journal of Applied Polymer Science 131(12):
n/a-n/a.

Leung, W. W.-F., et al. (2010). "Effect of face velocity, nanofiber packing density and
thickness on filtration performance of filters with nanofibers coated on a substrate."
Separation and Purification Technology 71(1): 30-37.

Li, M., et al. (2017). "Novel Hollow Fiber Air Filters for the Removal of Ultrafine
Particles in PM2.5 with Repetitive Usage Capability." Environ Sci Technol 51(17):
10041-10049.

Matulevicius, J., et al. (2016). "The comparative study of aerosol filtration by
electrospun polyamide, polyvinyl acetate, polyacrylonitrile and cellulose acetate
nanofiber media." Journal of Aerosol Science 92: 27-37.

Oh, G.-Y., et al. (2008). "Adsorption of toluene on carbon nanofibers prepared by
electrospinning." Science of The Total Environment 393(2–3): 341-347.

Papkov, D., et al. (2013). "Simultaneously Strong and Tough Ultrafine Continuous
Nanofibers." Acs Nano 7(4): 3324-3331.

Sae-lim, W., et al. (2006). "Correlation for the efficiency enhancement factor of a
single electret fiber." Journal of Aerosol Science 37(2): 228-240.

Son, W. K., et al. (2004). "Electrospinning of ultrafine cellulose acetate fibers: Studies
of a new solvent system and deacetylation of ultrafine cellulose acetate fibers."
Journal of Polymer Science Part B-Polymer Physics 42(1): 5-11.

Tan, S. H., et al. (2005). "Systematic parameter study for ultra-fine fiber fabrication
via electrospinning process." Polymer 46(16): 6128-6134.

Tungprapa, S., et al. (2007). "Electrospun cellulose acetate fibers: effect of solvent
system on morphology and fiber diameter." Cellulose 14(6): 563-575.

Wang, C., et al. (2014). "A high efficiency particulate air filter based on agglomerated


52





carbon nanotube fluidized bed." Carbon 79: 424-431.

Yoon, Y. I., et al. (2009). "Superhydrophobicity of cellulose triacetate fibrous mats
produced by electrospinning and plasma treatment." Carbohydrate Polymers 75(2):
246-250.

Yordem, O. S., et al. (2008). "Effects of electrospinning parameters on
polyacrylonitrile nanofiber diameter: An investigation by response surface
methodology." Materials & Design 29(1): 34-44.

Yun, K. M., et al. (2007). "Nanoparticle filtration by electrospun polymer fibers."
Chemical Engineering Science 62(17): 4751-4759.

Zhang, C., et al. (2005). "Study on morphology of electrospun poly(vinyl alcohol)
mats." European Polymer Journal 41(3): 423-432.
指導教授 蕭大智 江康鈺(Ta-Chih Hsiao Kung-Yuh Chiang) 審核日期 2022-1-26
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明