參考文獻 |
[1]. S. G. Ramsis, S. Mats Bernesjö, S. Thomas, J. Anger, D. Chu, and H. R. Moore, “Development of ultra-low-noise transformer technology,” IEEE Transactions on Power Delivery, vol. 54, no. 5, pp: 228-234, 2018.
[2]. H. Jingzhu, L. Dichen, L. Qingfen, Y. Yang, and L. Shanshan, “Electromagnetic vibration noise analysis of transformer windings and core,” IET Electric Power Applications, vol. 10, no. 4, pp. 251–257, 2016.
[3]. R. Girgis and M. Bernesjö, “Contributions to differences between on-site and factory-measured noise levels of power transformers,” IEEE Transactions on Power Delivery, vol. 10, no. 1, pp. 82–88, 2014.
[4]. L. Zhu, Q. Yang, R. Yan, X. Zhang, and Y. Yang, “Research on dynamic vibration of transformer with wireless power transfer system load,” IEEE Transactions on Magnetics, vol. 51, no. 11, pp. 2505404-1-4, 2015.
[5]. C. G. Yan, Y. Z. Wei, C. Xu, and B. H. Zhang, “Experimental verification and electromagnetic–mechanics–acoustic field coupling analysis of transformer pressure relief valve malfunctions due to external short-circuit faults,” IEEE Transactions on Magnetics, vol. 55, no. 6, pp. 8102904-1-4, 2019.
[6]. B. Garcia, J. C. Burgos and A.M. Alonso, “Transformer tank vibration modeling as a method of detecting winding deformations-part I: theoretical foundation,” IEEE Transactions on Power Delivery, vol. 21, no. 1, pp. 157-163, 2006.
[7]. B. Garcia, J. C. Burgos and A.M. Alonso, “Transformer tank vibration modeling as a method of detecting winding deformations-part II: experimental verification,” IEEE Transactions on Power Delivery, vol. 21, no. 1, pp. 164-169, 2006.
[8]. E. Doğan and B. Kekezoglu, “Power transformer noise, noise tests, and example test results,” International Journal of Electrical Communication Engineering, vol. 10, no. 1, pp. 57–61, 2016.
[9]. M. Javorski, J. Slavic, and M. Boltezar, “Frequency characteristics of magnetostriction in electrical steel related to the structural vibrations,” IEEE Transactions on Magnetics, vol. 48, no. 12, pp. 4727–4734, 2012.
[10]. R. Yan, X. Gao, L. H. Zhu, Q. X. Yang, T. Ben, Y. Li, and W. Yang, “Research on three-dimensional stress distribution of reactor core,” IEEE Transactions on Applied Superconductivity, vol. 26, no. 4, pp. 1–4, 2016.
[11]. K. Bouayed, L. Mebarek, V. Lanfranchi, J.-D. Chazot, R. Marechal, and M.-A. Hamdi, “Noise and vibration of a power transformer under an electrical excitation,” Applied Acoustics, vol. 128, pp. 64–70, 2017.
[12]. S. Ji, L. Zhu, and Y. Li, “Study on transformer tank vibration characteristics in the field and its application,” Przeglad Elektrotechniczny, vol. 87, no. 2, pp. 205–211, 2011.
[13]. H. Zhou, K. Hong, H. Huang, and J. Zhou, “Transformer winding fault detection by vibration analysis methods,” Applied Acoustics, vol. 114, pp. 136–146, 2016.
[14]. J. Zheng, J. Pan, and H. Huang, “An experimental study of winding vibration of a single-phase power transformer using a laser Doppler vibrometer,” Applied Acoustics, vol. 87, pp. 30–37, 2015.
[15]. Y. Wang and J. Pan, “Comparison of mechanically and electrically excited vibration frequency responses of a small distribution transformer,” IEEE Transactions on Power Delivery, vol. 32, no. 3, pp. 1173–1180, 2017.
[16]. M. Jin and J. Pan, “Vibration characteristics of a disk-type winding simulated by coupled concentric rings,” Applied Acoustics, vol. 101, pp. 104–114, 2016.
[17]. K. Hong, H. Huang, and J. Zhou, “Winding condition assessment of power transformers based on vibration correlation,” IEEE Transactions on Power Delivery, vol. 30, no. 4, pp. 1735–1742, 2015.
[18]. K. Hong, H. Huang, J. Zhou, Y. Shen, and Y. Li, “A method of realtime fault diagnosis for power transformers based on vibration analysis,” Measurement Science and Technology, vol. 26, no. 11, pp. 115011- 115016, 2015.
[19]. K. Hong, H. Huang, Y. Fu, and J. Zhou, “A vibration measurement system for health monitoring of power transformers,” Measurement, vol. 93, pp. 135–147, 2016.
[20]. M. Liu, O. Hubert, X. Mininger, F. Bouillault, L. Bernard, and T. Waeckerlé, “Reduction of power transformer core noise generation due to magnetostriction-induced deformations using fully coupled finiteelement modeling optimization procedures,” IEEE Transactions on Magnetics, vol. 53, no. 8, pp. 8400511-1-11, 2017.
[21]. A. J. Moses, P. I. Anderson, and T. Phophongviwat, “Localized surface vibration and acoustic noise emitted from laboratory-scale transformer cores assembled from grain-oriented electrical steel,” IEEE Transactions on Magnetics, vol. 52, no. 10, pp. 7100615-1-15, 2016.
[22]. S. Takajo, T. Ito, S. Okabe, and T. Omura, “Loss and noise analysis of transformer comprisinggrooved grain-oriented silicon steel,” IEEE Transactions on Magnetics, vol. 53, no. 9, pp. 2001606-1-6, 2017.
[23]. E. Reiplinger, "Assessment of grain-oriented transformer sheets with respect to transformer noise," Journal of Magnetism and Magnetic Materials, vol. 21, pp. 257-261, 1980.
[24]. T. Tanzer, H. Pregartner, M. Riedenbauer, R. Labinsky, M. Witlatschil, A. Muetze, K. Krischan, “Magnetostriction of electrical steel and its relation to the no-load noise of power transformers,” IEEE Transactions on Industry Applications, vol. 54, no. 5, pp. 4306-4314, 2018.
[25]. N. Ekreem, A. Olabi, T. Prescott, A. Rafferty, and M. Hashmi, “An overview of magnetostriction, its use and methods to measure these properties,” Journal of Materials Processing Technology, vol. 191, no. 13, pp. 96–101, 2007.
[26]. P. Klimczyk, P. Anderson, “A. Moses, andM. Davies, “Influence of cutting techniques on magnetostriction under stress of grain oriented electrical steel,” IEEE Transactions on Magnetics, vol. 48, no. 4, pp. 1417–1420, 2012.
[27]. Y. Gao, K. Muramatsu, K. Fujiwara, Y. Ishihara, S. Fukuchi, and T. Takahata, “Vibration analysis of a reactor driven by an inverter power supply considering electromagnetism and magnetostriction,” IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 4789–4792, 2009.
[28]. Y. Kai, Y. Tsuchida, T. Todaka, and M. Enokizono, “Influence of biaxial stress on vector magnetic properties and 2-D magnetostriction of a nonoriented electrical steel sheet under alternating magnetic flux conditions,” IEEE Transactions on Magnetics, vol. 50, no. 4, 2014.
[29]. B. Bai, X. Zhao, D. Chen, J. Wang, and B. Li, “Simulation and experiment research on transformer excitation current under DC magnetic bias based on J-A model,” Transactions of China Electrotechnical Society, vol. 28, no. S2, pp. 162–166, 2013.
[30]. Z. Zhao, F. Liu, S. L. Ho, W. N. Fu, and W. Yan, “Modeling magnetic hysteresis under DC-biased magnetization using the neural network,” IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 3958–3961, 2009.
[31]. Giselher Herzer, “Modern soft magnets: Amorphous and nanocrystalline materials,” Acta Materialia, vol. 61, no. 3, pp. 718–734, 2013.
[32]. F. Fiorillo, C. Beatrice, M. Coisson, L. Zhemchuzhna, “Loss and Permeability Dependence on Temperature in Soft Ferrites,” IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 4242–4245, 2009.
[33]. R. Parsons, B. Zang, K. Onodera, H. Kishimoto, A. Kato, K. Suzuki, “Soft magnetic properties of rapidly-annealed nanocrystalline Fe-Nb-B-(Cu) alloys,” Journal of Alloys and Compounds, vol. 723, pp. 408–417, 2017.
[34]. A. Makino, H. Men, T. Kubota, K. Yubuta, A. Inoue, “FeSiBPCu nanocrystalline soft magnetic alloys with high Bs of 1.9 Tesla produced by crystallizing heteroamorphous phase,” Materials Transactions, vol. 50, no. 1, pp. 204–209, 2009.
[35]. T. Kubota, A. Makino, A. Inoue, “Low core loss of Fe85Si2B8P4Cu1 nanocrystalline alloys with high Bs and B800,” Journal of Alloys and Compounds, vol. 509, pp. S416–S419, 2011.
[36]. Y. Zhang, P. Sharma, A. Makino, “Effects of cobalt addition in nanocrystalline Fe83.3Si4B8P4Cu0.7 soft magnetic alloy,” IEEE Transactions on Magnetics, vol. 50, no. 4, pp. 1–4, 2014.
[37]. K. Takenaka, A. D. Setyawan, P. Sharma, N. Nishiyama, and A. Makino, “Industrialization of nanocrystalline Fe-Si-B-P-Cu alloys for high magnetic flux density cores,” Journal of Magnetism and Magnetic Materials, vol. 401, pp. 479–483, 2016.
[38]. X. Zhao, L. Li, Z. Cheng, and J. Lu, “Analysis of magnetizing characteristic of laminated core based on the DC-biasing experiment,” Transactions of China Electrotechnical Society, vol. 26, no. 1, pp. 7–13, 2011.
[39]. G. Loizos and A. G. Kladas, “Core vibration analysis in Si-Fe distributed gap wound cores,” IEEE Transactions on Magnetics, vol. 48, no. 4, pp. 1617–1620, 2012.
[40]. S. C. Ji, Y. F. Luo, and Y. M. Li, “Research on extraction technique of transformer core fundamental frequency vibration based on OLCM,” IEEE Transactions on Power Delivery, vol. 21, no. 4, pp. 1981-1988, 2006.
[41]. C. Dong, A. Inoue, X.H. Wang, F.L. Kong, E.N. Zanaeva, F. Wang, A.I. Bazlov, S.L. Zhu, Q. Li, “Softmagnetic properties of Fe82-83B14-15Si2C0.5-1 amorphous alloyswith high saturation magnetization above 1.7 T,” Journal of Non-Crystalline Solids, vol. 500, pp. 173–180, 2018.
[42]. M. Ohta, Y. Yoshizawa, “New high-Bs Fe-based nanocrystalline soft magnetic alloys,” Japanese Journal of Applied Physics, vol. 46, pp. 20-24, 2007.
[43]. Philip Anderson, “Measurement of the stress sensitivity of magnetostriction in electrical steels under distorted waveform conditions,” Journal of Magnetism and Magnetic Materials, vol. 320, no. e583–e588, pp: e1-e6, 2008.
[44]. Ryusuke Hasegawa, “Applications of amorphous magnetic alloys,” Materials Science and Engineering A, vol. 375–377, pp: 90–97, 2004.
[45]. C. Suryanarayana, A. Inoue, “Iron-based bulk metallic glasses,” International Materials Reviews, vol. 58, no. 3, pp. 131–166, 2013.
[46]. J. F. Li, X. Liu, S. F. Zhao, H. Y. Ding, and K. F. Yao, “Fe-based bulk amorphous alloys with iron contents as high as 82at%,” Journal of Magnetism and Magnetic Materials, vol. 386, pp. 107–110, 2015.
[47]. A. M. K. Suzuki, N. Kataoka, and T. M. A. Inoue, “High saturation magnetization and soft magnetic properties of bcc Fe-Zr-B and Fe-Zr-B-M (M = transition metal) alloys with nanoscale grain size,” Materials Transactions, vol. 32, pp. 93–102, 1991.
[48]. X. J. Jia, Y. H. Li, G. Q. Xie, T. L. Qi, and W. Zhang, “Role of Mo addition on structure and magnetic properties of the Fe85Si2B8P4Cu1 nanocrystalline alloy,” Journal of Non-Crystalline Solids, vol. 481, pp. 590–593, 2018.
[49]. G. T. Xia, Y. G. Wang, J. Dai, and Y. D. Dai, “Effects of Cu cluster evolution on soft magnetic properties of Fe83B10C6Cu1 metallic glass in two-step annealing,” Journal of Alloys and Compounds, vol. 690, pp. 281–286, 2017.
[50]. G. Herzer, Modern soft magnets: amorphous and nanocrystalline materials, Acta Mater., vol. 61, no. 3, pp. 718–734, 2013.
[51]. M. Heathcote, J & P Transformer Book, 13th Edition - September 19, 2007, eBook ISBN: 9780080551784.
[52]. K. C. Agrawal, Industrial Power Engineering Handbook, 1st Edition - October 8, 2001, eBook ISBN: 9780080508634.
[53]. Electroacoustics - Sound level meters - Part 1: Specifications, IEC 61672-1 Std., 2013.
[54]. Power transformers - Part 10: Determination of sound levels, IEC 60076-10 Std., 2016.
[55]. International Standard IEC-60076-7, Power transformers-Part 7: Loading guide for oil-immersed power transformers, 2005.
[56]. Power Transformers-Part 3: Insulation levels, Dielectric Tests and External Clearances in Air, IEC60076-3, 2000.
[57]. High-Voltage Test Techniques, Part 1: General Definitions and Test Requirements, IEC 60060-1, 2010.
[58]. Richard H Lyon, Machinery Noise and Diagnostics, 1st Edition - July 15, 1987, eBook ISBN: 9781483289458.
[59]. J. Clark, AC Power Conditioners Design and Application, 1st Edition - December 28, 1989, eBook ISBN: 9780323159920.
[60]. K. Sueker, Power Electronics Design: A Practitioner′s Guide, 1st Edition - August 9, 2005, eBook ISBN: 9780080459929.
[61]. Q. Qiu, S. Dai, Z. K. Wang, T. Ma, L. Hu, Z. Q. Zhu, and G. M. Zhang., “Winding design and electromagnetic analysis for a 1250-kVA HTS transformer,” IEEE Transactions on Applied Superconductivity, vol. 25, no. 1, pp. 5500107-1-7, 2015.
[62]. A. Bakshi and S. V. Kulkarni, “Coupled electromagnetic-structural analysis of the spiraling phenomenon in a helical winding of a power transformer,” IEEE Transactions on Power Delivery, vol. 29, no. 1, pp. 235–240, 2014.
[63]. B. Zhang, N. Yan, S. Ma, and H. Wang, “Buckling strength analysis of transformer windings based on electromagnetic thermal structural coupling method,” IEEE Transactions on Applied Superconductivity, vol. 29, no. 2, pp. 0601804-1-4, 2019.
[64]. S. A. Ryder, “Diagnosing transformer faults using frequency response analysis,” IEEE Electrical Insulation Magazine, vol. 19, no. 2, pp. 16–22, 2013.
[65]. D. S. Liu , J. C. Li, S. H. Wang, S. Y. Yang and J. Ye, “Detection and analysis of fault for HTS AMDT cores by magnetostriction-induced vibration,” IEEE Transactions on Applied Superconductivity, vol. 29, no. 2, pp. 5500705-1-5, 2019.
[66]. K. Samarawickrama, N. D. Jacob, A. M. Gole, and B. Kordi, “Impulse generator optimum setup for transient testing of transformers using frequency response analysis and genetic algorithm,” IEEE Transactions on Power Delivery, vol. 30, no. 4, pp. 1949–1957, 2015.
[67]. H. Ni, N. Guo, Y. Zhao, X. Li, Q. Zhang, W. Yuan, X. Liu, and T. Wang, “Wavefront dependent dielectric strength of transformer oil under double-exponential impulse voltage,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 25, no. 5, pp. 1758–1765, 2018.
[68]. O. Kherif, S. Chiheb, M. Teguar, A. Mekhaldi, and N. Harid, “Timedomain modeling of grounding systems’ impulse response incorporating nonlinear and frequency-dependent aspects,” IEEE Transactions on Electromagnetic Compatibility, IEEE Transactions on Electromagnetic Compatibility, vol. 60, no. 4, pp. 907–916, 2018.
[69]. T. H. Thang, Y. Baba, V. A. Rakov, and A. Piantini, “FDTD computation of lightning-induced voltages on multiconductor lines with surge arresters and pole transformers,” IEEE Transactions on Electromagnetic Compatibility, vol. 57, no. 3, pp. 442–447, 2015.
[70]. A. Borghetti, A. Morched, F. Napolitano, C. A. Nucci, and M. Paolone, “Lightning-induced overvoltages transferred through distribution power transformers,” IEEE Transactions on Power Delivery, vol. 24, no. 1, pp. 360–372, 2009.
[71]. A. De Conti, V. C. Oliveira, P. R. Rodrigues, F. H. Silveira, J. L. Silvino, and R. Alipio, “Effect of a lossy dispersive ground on lightning overvoltages transferred to the low-voltage side of a single-phase distribution transformer,” Electric Power Systems Research, vol. 153, pp. 104–110, 2017.
[72]. Md Rabiul Islam, Y. G. Guo, and J. G. Zhu, “A medium frequency transformer with multiple secondary windings for medium voltage converter-based wind turbine power generating systems,” Journal of Applied Physics, vol. 113, pp. 17A324, 2013.
[73]. M. Rausch, M. Kaltenbacher, H. Landes, and R. Lerch, “Combination of finite and boundary element methods in investigation and prediction of load-controlled noise of power transformers,” Journal of Sound and Vibration, vol. 250, no. 2, pp. 323-338, 2002.
[74]. T. Ben, L. Q. Hou, L. Chen, P. Zhang, Y. K. Kong, and R. Yan, “The Vector Electromagnetic Vibration of Magnetically Controlled Reactor Considering the Vector Hysteretic Magnetostriction Effect,” IEEE Trans.Magn., vol. 58, no. 9, pp. 1-5, 2022.
[75]. L. H. Zhu, J. J. Li, Q. X. Yang, J. G. Zhu, C. S, Koh, “An Improved Magnetostriction Model for Electrical Steel Sheet Based on Jiles–Atherton Model,” IEEE Transactions on Magnetics, vol. 56, no. 4, pp. 7514604-1-4, 2022.
[76]. Kengo Takahashi, Daichi Azuma, Ryusuke Hasegawa, “Acoustic and Soft Magnetic Properties in Amorphous Alloy-Based Distribution Transformer Cores,” IEEE Transactions on Magnetics, vol. 49, no. 7, pp.4001-4004, 2013.
[77]. D. Azuma and R. Hasegawa, “Audible Noise from Amorphous Metal and Silicon Steel-Based Transformer Core,” IEEE Transactions on Magnetics, vol. 44, no. 11, pp.4104-4108, 2008.
[78]. B. X. Du and D. S. Liu, “Dynamic Behavior of Magnetostriction-Induced Vibration and Noise of Amorphous Alloy Cores,” IEEE Transactions on Magnetics, vol. 51, no. 4, pp. 7208708-1-4, 2015.
[79]. Y. J. Li, Z. T. Yang, C. G. Zhang, and S. H. M, “Vibration and Noise Measurement of medium-high frequency Transformer Cores under Non-Sinusoidal Excitation,” IEEE Transactions on Magnetics, vol. 58, no. 8, pp. 8401405, 2022.
[80]. Y. Dou, Y. J. Li, C. G. Zhang, S. C. Yue, and J. G. Zhu, “Effects of Uniaxial Stress Along Different Directions on Alternating Magnetic Properties of Silicon Steel Sheets,” IEEE Transactions on Magnetics, vol. 56, no. 3, pp. 7512004-1-4, 2022.
[81]. Y. J. Li, Z. T. Yang, C. G. Zhang, and S. H. Mu, “Vibration and Noise Measurement of medium-high frequency Transformer Cores under Non-Sinusoidal Excitation,” IEEE Transactions on Magnetics, vol. 58, no. 8, pp. 8401405-1-4, 2022. |