符合照明光型之紅外線 SMD LED 之封裝一次光學設計

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：13

、訪客IP：18.227.24.208

姓名

廖國豪(Kuo-Hao Liao) 查詢紙本館藏

畢業系所

光電科學與工程學系

論文名稱

符合照明光型之紅外線 SMD LED 之封裝一次光學設計
(First - order optical design of IR SMD LED for fitting target illumination)

相關論文

★ 氮化鋁鎵深紫外光發光二極體高光效之封裝研究	★ 發光二極體陣列用於德規近遠燈之研究
★ 高速成像通訊系統可行性之研究	★ 複雜波前體積全像強繞射計算模型之研究
★ 雙晶白光 LED 用於德規車前燈之光學設計	★ 利用編碼孔徑之高亮度高光譜成像系統
★ 應用DMD提高幀率之數位光學相位共軛投影系統之研究	★ 應用四步相移解碼多階相位之消除碟片位移雜訊之研究
★ 用於牙齒頻譜的多點量測之高光譜系統	★ 結合全像光學元件的微型化數位全像顯微鏡
★ 隨讀取位置改變之多頁繞射疊加訊號之相位誤差容忍度分析	★ 多波繞射疊加訊號法之參考光位置誤差分析

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 (2025-5-5以後開放)

摘要(中)

本論文提出一種符合照明光形之紅外線 SMD LED 之封裝一次光學設計，此方法透過對目標配光曲線、光源配光曲線與模擬配光曲線的積分運算建構出符合目標配光曲線的一次光學設計。
在本論文的研究中，先針對目前市面上各種封裝形式的紅外線 LED進行優劣分析，總結出最理想的封裝形式為SMD-Ceramic封裝形式，接著分析一次光學設計的相關文獻資料，再根據不足的部份提出我們的優化方法，根據優化過後的模擬結果，模擬配光曲線與目標配光曲線的NCC平均達99.84%，接著，我們將LED封裝完成，量測其配光曲線，最後，將實測、模擬與目標配光曲線進行比對，實測與模擬配光曲線的NCC平均達99.64%，實測配光曲線與目標配光曲線的NCC平均達99.72%。

摘要(英)

In this thesis, we propose a first-order optical design of infrared SMD LED that matches the target intensity distribution. In this design, we design the first-order optical lens that the result intensity distribution can match to target intensity distribution through integrating the target、light source and simulation intensity distribution.
First, the study analyzes various commercial infrared LED packages and summed up the most suitable package is SMD package with ceramic substrate. Second, this thesis proposes a method to optimize first-order optical design after we analyze related literature. The simulation result shows the average NCC of intensity distribution between final design of our method and target is 99.84%. Finally, we complete the assembly of infrared SMD LED and measure the intensity distribution. The average NCC of intensity distribution between simulation and measurement is 99.64%. The average NCC of intensity distribution between target and measurement is 99.72%.

關鍵字(中)

★ 一次光學
★ 封裝透鏡

關鍵字(英)

★ First-order optics
★ Package lens

論文目次

摘要 I
Abstract II
致謝 III
目錄 IV
圖目錄 VI
表目錄 IX
第一章緒論 1
1-1 研究背景 1
1-2 研究動機與目的 2
1-3 論文大綱 15
第二章基礎原理 17
2-1 引言 17
2-2 發光二極體晶片基本介紹 17
2-3 中場擬合法 20
2-4 輻射度量學 22
2-5 幾何光學 26
第三章紅外線SMD LED封裝一次光學設計 30
3-1目標遠場配光曲線、發光二極體晶片與透鏡材質 31
3-2 透鏡曲率計算 42
3-3 光學模擬與補償係數計算 48
3-4 紅外線 SMD LED成品封裝與光學量測 64
第四章結論 68
參考文獻 71
中英文名詞對照表 76

參考文獻

1. IHS Markit., Video surveillance:How technology and the cloud is disrupting the market, https://cdn.ihs.com/www/pdf/IHS-Markit-Technology-Video-surveillance.pdf.
2. Aclarity　Systems., Will IP cameras replace alalog cameras?, https://aclaritysystems.com/blogpost/.
3. Statista, Analogue and IP camera market size worldwide from 2011 to 2017, https://www.statista.com/statistics/534045/global-analogue-and-ip-camera-market/.
4. S. Isokawa, and H. Toda, “Semiconductor light emitting device with increased luminous power,” United States Patent, US6121637 (1998).
5. J. Thillays, “Electroluminescent semiconductor device containing current controlling rectifying device,” United States Patent, US3739241(1972).
6. “Lamps, incandescent, aircraft service, single contact midget flanged base, T-1-3/4 bulb,” Military Specifications and Standards (1997).
7. J. Okazaki, and M. Katoh, “Leadless chip-type light emitting element,” United States Patent, US5298768A(1992).
8. C. N. Tan, S. L. Oon, and C. K. Tan, “Ceramic light emitting device,” United States Patent, US20090219722A1 (2008).
9.C. P. Hussell, P. S. Andrews, F. A. Tudorica, and R. F. Welch, “Ceramic-based light emitting diode (LED) devices, components and methods,” United States Patent, US8895998B2 (2012).
10. Osram GmbH., DS234 luxeon ir compact for automotive datasheet, https://www.lumileds.com/uploads/811/DS234-luxeon-ir-compact-for-automotive-datasheet-pdf.
11. Osram GmbH., Osram Infrared Emitter (850nm) Version 1.6 SFH 4550, https://www.osram.com/media/resource/hires/osram-dam-2496286/SFH%204550.pdf.
12. Vishay Intertechnology, Inc., VISHAY High Speed Infrared Emitting Diode, 940 nm, https://www.vishay.com/docs/84581/vsly3943.pdf.
13. Osram GmbH., Power TOPLED® Lens, SFH 4258, https://www.osram.com/media/resource/hires/osram-dam-5824078/SFH+4258_EN.pdf.
14. Osram GmbH., OSLON® Black, SFH 4715AS, https://www.osram.com/ecat/OSLON%C2%AE%20Black%20SFH%204715AS/com/en/class_pim_web_catalog_103489/global/prd_pim_device_2219819/.
15. Vishay Intertechnology, Inc., VISHAY High Power Infrared Emitting Diode,850 nm,Surface Emitter Technology, http://www.vishay.com/docs/84908/vsmy98525ds.pdf.
16. Lumileds Holding B.V., LUXEON IR Domed Line Product Datasheet, https://www.lumileds.com/uploads/685/DS191-luxeon-ir-domed-line-datasheet-pdf.
17. B. A. Jacobson and R. D. Gengelbach, “Lens for uniform LED illumination: an example of automated optimization using Monte Carlo ray-tracing of an LED source,” Proc. SPIE 4446, 130-138 (2002).
18. S. J. Lee, “Light-emitting diode lamp design by monte carlo photon simulation,” Appl. Opt. 40, 1427-1437 (2001).
19. N. T. Tran and F. G. Shi, “LED package design for high optical efficiency and low viewing angle,” in Microsystems Packaging, Assembly and Circuits Technology (IEEE, 2007), 10-13(2007).
20. Hsu, H. Ching, C. J. Wang, H. R. Lin, and P. Han,“Optimized semi-sphere lens design for high power LED package,” Microelectron Reliab 52, 894-899 (2012).
21. H. J. Rounds, “A note on carborundum,” Electrical World 19, 309 (1907).
22. G. Destriau, “Scintillations of zinc sulfides with alpha-rays,” J. Chimie Physique 33, 587 (1936).
23. H. Welker, “On new semiconducting compounds,”Zeitschrift für Naturforschung 7a, 744 (1952).
24. H. Welker, “On new semiconducting compounds II,”Zeitschrift für Naturforschung 8a, 248 (1953).
25. S. Nakamura, M. Senoh, and T. Mukai, “P-GaN/n-InGaN/n-GaN double-heterostructure blue-lightemitting diodes,” Jpn. J. Appl. Phys. 32, L8 (1993).
26. J. M. Palmer and B. G. Grant, The Art of Radiometry (Society of Photo Optical, 2009).
27. X. Luo, R. Hu, S. Liu, and K. Wang, “Heat and fluid flow in high-power LED packaging and applications,” Prog. Energ. Combust. 56, 1-32 (2016).
28. 林旻賢，高功率LED的散熱方式與溫度量測分析，國立交通大學平面顯示技術碩士學位學程碩士論文，中華民國九十九年。
29. M. Krames, O. Shchekin, R. Mueller-Mach, G. Mueller, L. Zhou, G. Harbers, and M. Craford, “Status and future of high-power light-emitting diodes for solid-state lighting,” J. Disp. Technol. 3, 160-175 (2007).
30. C. C. Sun, T. X. Lee, S. H. Ma, Y. L. Lee, and S. M. Huang, “Precise optical modeling for LED lighting verified by cross correlation in the midfield region,”Opt. Lett. 31, 2193-2195 (2006).
31. W. T. Chien, C. C. Sun, and I. Moreno, “Precise optical model of multi-chip white LEDs,” Opt. Express 15, 7572-7577 (2007).
32. CIE 1988 2° spectral luminous efficiency functions of photopic vision, CIE Publication No. 86 (1988b).
33. V. N. Mahajan, Fundamentals of Geometrical Optics (Society of Photo Optical, 2014).
34. Illuminating Engineering Society, ANSI/IES RP-16-17, Nomenclature and Definitions for Illuminating Engineering, https://www.ies.org/standards/definitions/.
35. F. L. Pedrotti and L. M. Pedrotti, Introduction to Optics (PrenticeHall, Englewood Cliffs, N.J., 1987).
36. E. Hecht, Optics, 4th ed. (Addison Wesley, San Francisco, 2002).
37. V. N. Mahajan, Optical Imaging and Aberrations: Part I Ray Geometrical Optics (SPIE PRESS, Washington, 1998).
38. Epileds Technologies, inc., BN-D2222A-A3(mW)(350mA), http://em-el.pl/allegro/led/BN-D2222A-A3.pdf.
39. Epileds Technologies, inc., BN-D3030F-A3(mW)(350mA), http://em-el.pl/allegro/led/BN-D3030F-A3.pdf.
40. Dow, Dow Corning OE-6636 Optical Encapsulant, http://www.casmoon.com/upfile/file/20141016/2014101611091858710.pdf.
41. M. J. Sing, K. H. Kim, and S. Hong, “Simulation-based optimization of cure cycle of large area compression molding for LED silicone lens,” Adv. Mater. Sci. Eng. 2015, 1–11 (2015).
42. Synopsys, Inc., LightTools optical simulation, https://www.synopsys.com/optical-solutions.html.
43. Radiant Vision Systems, LLC, SIG–400 Source Imaging Goniometer, https://www.radiantvisionsystems.com/sites/default/files/library-documents/Radiant_SPEC_SIG-400-Source-Imaging-Goniometer_EN.pdf.
44. Radiant Vision Systems, LLC, ProSource Software, https://www.radiantvisionsystems.com/sites/default/files/library-documents/Radiant_SPEC_ProSource_EN.pdf.
45. F. E. Nicodemus, Self-Study Manual on Optical Radiation Measurements:Part I–Concepts, NBS Technical Note 910-1, 68(1976).
46. Dassault Systèmes SolidWorks Corporation, 3D CAD Design Software Solidworks, https://www.solidworks.com/.
47. D. Lu and C. P. Wong, Materials for Advanced Packaging (Springer, 2008).

指導教授

孫慶成楊宗勳(Ching-Cherng Sun Tsung-Hsun Yang)

審核日期

2020-5-7

推文