參考文獻 |
[1]. A.C. Lund and C. A. Schuh, “Topological and chemical arrangement of binary alloys during severe deformation”, Journal of Applied Physics, vol. 95 , 2004, pp.4815-4822.
[2]. P. K. Bhoyar and Dr.A.B. Borade “Advance biocompatibility material for implant”, Journal of Materials Science and Engineering., vol. 1 Issue: 3, pp.145-199.
[3]. J. J. Oak , D. V. Louzguine-Luzgin and A. Inoue, “Fabrication of Ni-free Ti-based bulk-metallic glassy alloy having potential for application as biomaterial, and investigation of its mechanical properties, corrosion, and crystallization behavior”, Journal of Materials Research, vol. 22, Issue 5, 2007, pp1346-1353.
[4]. J. J. Oak and A. Inoue, “Attempt to develop Ti-based amorphous alloys for biomaterials”, Materials Science and Engineering , A 449-451, (2007), pp. 220–224.
[5]. Z.Y. Suo, S.W. Liu, L. Zhang, H. L. Gao, H. Y. Zhang and K. Q. Qiu, “Porous Bulk Metallic Glass Fabricated by Powder Consolidation”, Journal of Minerals & Materials Characterization & Engineering, vol. 7, No.2, 2008, pp 97-104.
[6]. G.S. Steinemann, S.M. Perren, G. L‥utjering, U. Zwicker and W. Bunk (Eds.), “Corrosion of titanium and titanium alloys for surgical implants” Ti , 84 Science and Technology, 1984, pp. 1327-1334.
[7]. G.S. Steinemann, in: G.D. Winter, J.L. Leray and K.E. de Goot (Eds.), “Corrosion of surgical implants in vivo and in vitro tests”, Evaluation of Biomaterials, Wiley, New York, 1980, pp. 1-13.
[8]. M. Niinomi, Metals for Biomedical Devices, CRC Press, 2010.
[9]. C. Leyens and M. Peters (Eds.), Titanium and Titanium Alloys: Fundamentals and Applications, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2003.
[10]. B. Basu, D. Katti and A. Kumar (Eds.), Advanced Biomaterials — Fundamentals, Processing and Applications, Wiley, 2009.
[11]. M. Geetha, A.K. Singh, R. Asokamani and A.K. Gogia, Prog. “Ti based biomaterials, the ultimate choice for orthopaedic implants-A review”, Materials Science. vol. 54, 2009, pp. 397–425.
[12]. M. Long and H.J. Rack, “Titanium Alloys in Total Joint Replacement-A Materials Science Perspective’’, Biomaterials,19, 1998, pp.1621–1639.
[13]. M. Nicoara, A. Raduta, R. Parthiban, C. Locovei, J. Eckert and M. Stoica, “Low Young’s modulus Ti-based porous bulk glassy alloy without cytotoxic elements”, Acta Biomaterialia, vol. 36, 2016, pp.321-331.
[14]. C.H. Huang, Y.S. Huang, Y.S. Lin, C.H. Lin, J.C. Huang, C.H. Chen, J.B. Li, Y.H. Chen and J.S.C. Jang, “Electrochemical and biocompatibility response of newly developed”, Materials Science and Engineering., C 43, 2014, pp.343-349.
[15]. J.B. Li, H.C. Lin, J.S.C. Jang, C.N. Kuo, Y.H. Chen and J.C. Huang, “Novel open-cell bulk metallic glass foams with promising characteristic”, Materials Letters, 105,2013, pp.140-143.
[16]. A. Brenner, “Electrodeposition of Alloys’’, vol. 1 and 2 Academic Press, 1963.
[17]. W. Klement, R.H. Willens, and P. Duwez, “Non-crystalline Structure in solidified Gold-Silicon alloys,” Nature, vol. 187, 1960, pp.869-870.
[18]. H.S. Chen and C.E. Miller, “A rapid quenching technique for the preparation of thin uniform films of amorphous solids”, Review of Scientific Instruments, vol. 41, 1970, pp.1237-1238.
[19]. 吳學陞,工業材料,149, 1999, pp.154.
[20]. C.C. Koch, O.B. Cavin, C.G. McKamey, and J.O. Scarbrough, “Preparation of amorphous Ni60Nb40 by mechanical alloying”, Applied Physics Letters, vol. 43, 1983, pp.1017-1019.
[21]. A. Inoue and K. Hashimoto, “Amorphous and Nanocrystalline Materials”, Springer, 1995, pp.7.
[22]. A. Inoue, “Buck amophous alloys with soft and hard magnetic properties”, Materials Science and Engineering., vol.226-228, 1997, pp.357-363.
[23]. A. Inoue, A. Kato, T. Zhang, S. G. Kim and T. Masumoto, “Mg-Cu-Y Amorphous Alloys with High Mechanical Strengths Produced by a Metallic Mold Casting Method’’, Materials Transactions JIM, vol. 32, 1991, pp.609-616.
[24]. A. Inoue, T. Nakamura, N. Nishiyama and T. Masumoto, “Mg-Cu-Y Bulk Amorphous Alloys with High Tensile Strength Produced by a High-Pressure Die Casting Method’’, Materials Transactions JIM, 33, 1992, pp.937-945.
[25]. A. Inoue and T. Wada, “Fabrication, Thermal Stability and Mechanical Properties of Porous Bulk Glassy Pd-Cu-Ni-P Alloys’’, Materials Transactions, vol. 44, No. 10, 2003, pp. 2228-2231.
[26]. A. Inoue, “Bulk amorphous alloys with soft and hard magnetic properties”, Materials Science and Engineering, vol. 226-228, 1997, pp.357-363.
[27]. A. Inoue, “High strength bulk amorphous alloys with low critical cooling rates”, Materials Transactions JIM, vol. 36, 1995, pp.866-875.
[28]. A. Inoue, T. Zhang and A. Takeuchi, “Ferrous and nonferrous bulk amorphous alloys”, Materials Science Forum, vol. 269-272, 1998, pp.855-864.
[29]. A. Inoue, A. Takeuchi and T. Zhang, “Ferromagnetic bulk amorphous alloys”, Metallurgical and Materials Transactions, vol. 29, 1998, pp.1779-1793.
[30]. R.E. Reed-Hill and R. Abbaschian, Physical Metallurgy Principles 3rd Edition, PWS-KENT Publishing Company, Boston, 1994.
[31]. D.R. Gaskell, Introduction to the Thermodynamics of Materials 4th Edition, Taylor & Francis, US, 2009.
[32]. R. W. Cahn, P. Hassen and E. J. Kramer(ed), Materials Science and Technology, vol.9, New York, USA, 1991.
[33]. K. L. Chapra, Thin Film Phenomena, McGraw-Hill, 1969.
[34]. W. Paul and R. J. Temkin, “Amorphous germanium I. A model for the structural and optical properties ”, Advance Physical., 1973, pp.531-580.
[35]. B. Li, N. Nordstrom and E. J. Lavernia, “Spray forming of Zircaloy-4”, Materials Science Engineering., A 237, 1997, pp.207-215.
[36]. R. Liu, J. Li, K. Dong, C. Zheng and H. Liu, “First synthesis of vanadium oxide thin films by spray pyrolysis technique” Materials Science Engineering., B 94, 2002, pp.141-147.
[37]. P. S. Grant, “Spray forming”, Progress in Materials Science, vol. 39, 1995, pp.497-545.
[38]. C. R. M. Afonso, C. Bolfarini, C. S. Kiminami, N. D. Bassim, M. J. Kaufman, M. F. Amateau, T. J. Eden and J. M. Galbraith, J. M. Galbraith, “Amorphous phase formation during spray forming of Al84Y3Ni8Co4Zr1” Non-Cryst. Solids, vol.284, 2001, p.134-138.
[39]. K.L. Chopra, “Thin Film Phenomena”, McGraw-Hill, 1969.
[40]. R. W. Cahn, P. Hassen and E. J. Kramer(ed), Materials Science and Technology, vol. 9, New York, USA, 1991.
[41]. A. Inoue, N. Nishiyama and H.M. Kimura, “Preparation and Thermal Stability of Bulk Amorphous Pd40Cu30Ni10P20 Alloy Cylinder of 72 mm in Diameter”, Materials Transactions JIM, vol. 38, 1997, pp.179-183.
[42]. A. Inoue, N. Nishiyama, H.M. Kimura, “Preparation and Thermal Stability of Bulk Amorphous Pd40Cu30Ni10P20 Alloy Cylinder of 72 mm in Diameter”, Materials Transactions JIM, vol. 38, 1997, pp.179-183
[43]. A. Inoue, “Bulk amorphous and nanocrystalline alloys with high functional properties”. Materials Science., vol.304-306, 2001, pp.1-10.
[44]. A.Inoue, “Stabilization of metallic supercooled liquid and bulk amorphous alloys”, Acta Materialia, vol. 48, 2000, pp.279-306
[45]. J.S.C. Jang, I.H. Wang, L.J. Chang, G.J. Chen, T.H. Hung and J.C. Huang, “Crystallization kinetics and thermal stability of the Zr60Al7.5Cu17.5Ni10Si4B1 amorphous alloy studied by isothermal differential scanning calorimetry and transmission electron microscopy”, Materials Science and Engineering. A, vol. 449-451, 2007, pp.511-516.
[46]. T.A. Waniuk, J. Schroers and W.L. Johnson, “Critical cooling rate and thermal stability of Zr-Ti-Cu-Ni-Be alloys”, Applied Physics Letters, vol. 78, 2001, pp.1213-1215.
[47]. A. Inoue, W. Zhang, T. Zhang and K. Kurosaka, “High-strength Cu-based bulk glassy alloys in Cu-Zr-Ti and Cu-Hf-Ti ternary systems”, Acta Materialia, vol. 49, 2001, pp.2645-2652.
[48]. A. Inoue, “Stabilization of Metallic Super Cooled Liquid and Bulk Amorphous Alloys”, Acta Materials, vol. 48, 2000, pp.279-306.
[49]. 鄭振東,非晶質金屬漫談,建宏出版社,1990.
[50]. A. Inoue and A. Takeuchi, “Recent development and application products of bulk glassy alloys”, Acta Materialia, vol. 59, 2011, pp.2243-2267.
[51]. C.L. Qiu, L. Liu, M. Sun and S.M. Zhang, “The effect of Nb addition on mechanical properties, corrosion behavior, and metal-ion release of Zr-Al-Cu-Ni bulk metallic glasses in artificial body fluid”, Journal of Biomedical Materials Research, vol. 75, 2005, pp.950-956.
[52]. A. Inoue, B.L. Shen, A.R. Yavari and A.L. Greer, “Mechanical properties of Fe-based bulk glassy alloys in Fe–B–Si–Nb and Fe–Ga–P–C–B–Si systems”, Journal of Materials Research, vol. 18, 2003, pp.1478-1492.
[53]. S. R. Elliot, “Physics of Amorphous Materials’’, USA, 1990.
[54]. International Organization for Standardization, “ISO-10993: Biological Evaluation of Medical Devices ’’, 3rd, 2003.
[55]. R. Zallen, “The Physics of Amorphous Solids’’, A Wiley-Interscience, Canada,1983.
[56]. A. Inoue, K. Nakazato, Y. Kawamura, A. P. Tsai and T. Masumoto, “Effect of Cu or Ag on the Formation of Coexistent Nanoscale Al Particles in Al-Ni-M-Ce (M=Cu or Ag) Amorphous Alloys”, Materials Transactions JIM, vol. 35, 1994, pp.95-102.
[57]. J.B. Li, H.C. Lin, J.S.C. Jang, C.N. Kuo and J.C. Huang, “Novel open-cell bulk metallic glass foams with promising characteristics”, Materials Letters vol. 105, 2013, pp.140-143.
[58]. A.G. Evans, J.W. Hutchinson and M.F. Ashby, “Multifunctionality of cellular metal systems”, Progress in Materials Science, vol. 43, 1999, pp.171-221.
[59]. H.C. Lin, P.H. Tsai, J.H. Ke, J.B. Li, J.S.C. Jang, C.H. Huang and J.C. Huang, “Design a toxic-element-free Ti-based amorphous alloy with remarkable supercooled liquid region for biomedical application”, Journal, intermetallic 55, 2014, pp.22-27. |