參考文獻 |
[1] M. Goeppert-Mayer, “Elementary Processes with Two Quantum Jumps”, Annals of Physics, Vol. 9, No. 2, pp. 273-294, 1931.
[2] W. Kaiser and C. G. B. Garrett, “Two-photon Excitation in CaF2:Eu2+”, Physical Review Letters, Vol. 7, No. 6, pp. 229-231, 1961.
[3] W. Denk, J. H. Stricker and W. W. Webb, “Two-photon Laser Scanning Fluorescence Microscopy”, Science, Vol. 248, No. 4951, pp. 73-76, 1990.
[4] J. D. Bhawalkar, N. D. Kumar, C. F. Zhao and P. N. Prasad, “Two-photon Photodynamic Therapy”, Journal of Clinical Laser Medicine & Surgery, Vol. 15, No. 5, pp. 201-204, 1997.
[5] B. H. Cumpston, S. P. Ananthavel, S. Barlow, D. L. Dyer, J. E. Ehrlich, L. L. Erskine, A. A. Heikal, S. M. Kuebler, I. Y. S. Lee, D. McCord-Maughon, J. Qin, S. R. Marder and J. W. Perry. “Two-photon Polymerization Initiators for Three-dimensional Optical Data Storage and Microfabrication”, Nature, Vol. 398, No. 6722, pp. 51-54, 1999.
[6] H. B. Sun, S. Matsuo and H. Misawa, “Three-dimensional Photonic Crystal Structures Achieved With Two-photon-absorption Photopolymerization of Resin”, Applied Physics Letters, Vol. 74, No. 6, pp. 786-788, 1999.
[7] S. Maruo, and S. Kawata, “Two-photon-absorbed Near-infrared Photopolymerization for Three-dimensional Microfabrication.” Journal of Microelectromechanical Systems, Vol. 7, No. 4, pp. 411-415, 1998.
[8] 潘恩亞、蒲念文、董玉平與游漢輝,「雙光子吸收光致聚合技術應用於微元件製作之研究」,中正嶺學報,34卷,1-16頁,2005。
[9] L. Li, R. R. Gattass, E. Gershgoren, H. Hwang and J. T. Fourkas, “Achieving λ/20 Resolution by One-Color Initiation and Deactivation of Polymerization”, Science, Vol. 324, pp. 910-913, 2009.
[10] J. F. Xing, X. Z. Dong, W. Q. Chen, X. M. Duan, N. Takeyasu, T. Tanaka and S. Kawata, “Improving Spatial Resolution of Two-photon Microfabrication by Using Photoinitiator With High Initiating Efficiency”, Applied Physics Letters, Vol.90, No. 13, 131106, 2007.
[11] H. B. Sun, T. Kawakami, Y. Xu, J. Y. Ye, S. Matuso, H. Misawa, M. Miwa and R. Kaneko, “Real Three-dimensional Microstructures Fabricated by Photopolymerization of Resins through Two-photon Absorption”, Optics Letters, Vol. 25, No. 15, pp. 1110-1112, 2000.
[12] D. Y. Yang, T. W. Lim, Y. Son, H. J. Kong, K. S. Lee, D. P. Kim and S. H. Park, “Additive Process Using Femto-second Laser for Manufacturing Three-dimensional Nano/Micro-structures”, International Journal of Precision Engineering and Manufacturing, Vol. 8, No. 4, pp. 63-69, 2007.
[13] J. T. Lee, M. C. George, J. S. Moore and P. V. Braun, “Multiphoton Writing of Three-Dimensional Fluidic Channels within a Porous Matrix”, Journal of the American Chemical Society, Vol. 131, No. 32, pp. 11294-11295, 2009.
[14] S. Rekštytė, A. Žukauskas, V. Purlys, Y. Gordienko and M. Malinauskas, “Direct Laser Writing of 3D Polymer Micro/Nanostructures on Metalic Surfaces”, Applied Surface Science, Vol. 270, pp. 382-387, 2013.
[15] T. Baldacchini, A. C. Pons, J. Pons, C. N. LaFratta and J. T. Fourkas, “Multiphoton Laser Direct writing of Two-dimensional Silver Structures”, Optics Express, Vol. 13, No. 4, pp. 1275-1280, 2005.
[16] J. F. Xing, M. L. Zheng and X. M. Duan, “Two-photon Polymerization Microfabrication of Hydrogels: an Advanced 3D Printing Technology for Tissue Engineering and Drug Delivery”, Chemical Society Reviews, Vol. 44, No. 15, pp. 5031-5039, 2015.
[17] S. D. Gittard, A. Nguyen, K. Obata, A. Koroleva, R. J. Narayan and B. N. Chickov, “Fabrication of Microscale Medical Devices by Two-photon Polymerization with Multiple Foci via a Spatial Light Modulator”, Biomedical Optics Express, Vol. 2, No. 11, pp. 3167-3178, 2011.
[18] K. Obata, A. El-Tamer, L. Koch, U. Hinze and B. N. Chichkov, “High-aspect 3D Two-photon Polymerization Structuring with Widened Objective Working Range (WOW-2PP)”, Light-Science & Applications, Vol. 2, doi:10.1038/lsa.2013.72, 2013.
[19] Y. Lin, W. Xiong, L. J. Jiang, Y. S. Zhou and Y. F. Lu, “Precise 3D printing of Micro/Nanostructures Using Highly Conductive Carbon Nanotube-thiol-acrylate Composites”, Laser 3D Manufacturing, Vol. 9738, 973808, 2016.
[20] X. Zheng, K. Cheng, X. Zhou, J. Lin and X. Jing, “A Method for Positioning the Focal Spot Location of Two Photon Polymerization”, AIP Advances, Vol. 7, No. 9, 095318, 2017.
[21] K. Takada, H. B. Sun and S. Kawata, “Improved Spatial Resolution and Surface Roughness in Photopolymerization-based Laser Nanowriting”, Applied Physics Letters, Vol. 86, No. 7, 071122, 2005.
[22] C. Y. Liao, M. Bouriau, P. L. Baldeck, J. C. Léon, C. Masclet and T. T. Chung, “Two-dimensional Slicing Method to Speed up the Fabrication of Micro-objects based on Two-photon Polymerization”, Applied Physics Letters, Vol. 91, No. 3, 033108, 2007.
[23] S. H. Park, S. H. Lee, D. Y. Yang, H. J. Kong and K. S. Lee, “Subregional Slicing Method to Increase Three-dimensional Nanofabrication Efficiency in Two-photon Polymerization”, Applied Physics Letters, Vol. 87, No. 15, 154108, 2005.
[24] S. Kawata, H. B. Sun, T. Tanaka and K. Takada, “Finer Features for functional Microdevices”, Nature, Vol. 412, No. 6848, pp. 697-698, 2001.
[25] H. B. Sun and S. Kawata, “Two-photon Laser Precision Microfabrication and Its Applications to Micro-Nano Devices and Systems”, Journal of Lightwave Technology, Vol. 21 No. 3, pp. 624-633, 2003.
[26] H. B. Sun, T. Tanaka and S. Kawata, “Three-dimensional Focal Spots Related to Two-photon Excitation”, Applied Physics Letters, Vol. 80, No. 20, pp. 3673-3675, 2002.
[27] T. Stichel, B. Hecht, R. Houbertz and G. Sextl, “Two-photon Polymerization as Method for the Fabrication of Large Scale Biomedical Scaffold Applications”, Journal of Laser Micro/Nanoengineering, Vol. 5, No. 3, pp. 209-212, 2010.
[28] T. Stichel, B. Hecht, R. Houbertz and G. Sextl, “Compensation of Spherical Aberration Influences for Two-photon Polymerization Pattering of Large 3D Scaffolds”, Applied Physics a – Materials Science & Processing, Vol. 121, No. 1, pp. 187-191, 2015.
[29] W. Chu, Y. Tan, P. Wang, J. Xu, W. Li, J. Qi and Y. Cheng, “Centimeter-Height 3D Printing with Femtosecond Laser Two-photon Polymerization”, Advanced Materials Technologies, Vol. 3, No. 5, 1700396, 2018.
[30] T. P. Bernat, J. H. Campbell, N. Petta, I. Sakellari, S. Koo, J. H. Yoo and C. Grigoropoulos, “Fabrication of Micron-scale Cylindrical Tubes by Two-photon Polymerization”, Fusion Science and Technology, Vol. 70, No.2, pp. 310-315, 2016.
[31] J. Purtov, A. Verch, P. Rogin and R.Hensel, “Improved Development Procedure to Enhance the Stability of Microstructures Created by Two-photon polymerization”, Microelectronic Engineering, Vol. 194, pp. 45-50, 2018.
[32] L. Yang, J. Li, Y. Hu, C. Zhang, Z. Lao, W. Huang and J. Chu, “Projection Two-photon Polymerization Using a Spatial Light Modulator”, Optics Communications, Vol. 331, pp. 82-86, 2014.
[33] L. Yang, A. El-Tamer, U. Hinze, J. Li, Y. Hu, W. Huang, J. Chu and B. N. Chichkov, “Parallel Direct Laser Writing of Micro-optical and Photonic Structures Using Spatial Light Modulator”, Optics and Lasers in Engineering, Vol. 70, pp. 26-32, 2015.
[34] K. S. Lee, R. H. Kim, D. Y. Yang and S. H. Park, “Advances in 3D Nano/Microfabrication Using Two-photon Initiated Polymerization”, Progress in Polymer Science, Vol. 33, No. 6, pp. 631-681, 2008.
[35] I. I. Shishkin, K. B. Samusev, M. V. Rybin, M. F. Limonov, R. V. Kiyan, B. N. Chickov, Y. S. Kivshar and P. A. Belov, “Two Modes of Laser Lithography Fabrication of Three-dimensional Submicrometer Structures”, Physics of the Solid State, Vol. 56, No. 11, pp. 2166-2172, 2014.
[36] T. W. Lim, S. H. Park and D. Y. Yang, “Contour Offset Algorithm for Precise Patterning in Two-photon Polymerization”, Microelectronic Engineering, Vol. 77, No. 3-4, pp. 382-388, 2005.
[37] S. H. Park, T. W. Lim, D. Y. Yang, S. W. Yi, H. J. Kong and K. S. Lee, “Direct Nano-patterning Methods Using Nonlinear Absorption in Photopolymerization Induced by a Femtosecond Laser”, Journal of Nonlinear Optical Physics & Materials, Vol. 14, No. 3, pp. 331-340, 2005.
[38] S. Wu, J. Serbin and M. Gu, “Two-photon Polymerization for Three-dimensional Micro-fabrication”, Journal of Photochemistry and Photobiology, Vol. 181, No. 1, pp. 1-11, 2006.
[39] 謝岳廷,「基於雙光子光致聚合技術之四軸微製造系統製作高深寬比結構之研究」,國立中央大學,碩士論文,民國104年。
[40] Edmund Optics® (EO), ”Gaussian Beams Calculator”, https://www.edmundoptics.com/resources/tech-tools/gaussian-beams/.
[41] X. Pan and D. Tu, “Research the Effect of Coverage Rate on the Surface Quality in Laser Direct Writing Process”, International Journal of Modern Physics B, Vol. 31, No. 16-19, 2017.
[42] T. W. Lim, Y. Son, D. Y. Yang, H. J. Kong, K. S. Lee and S. H. Park, “Highly Effective Three-dimensional Large-scale Microfabrication Using a Continuous Scanning Method”, Applied Physics a – Materials Science & Processing, Vol, 92, No. 3, pp. 541-545, 2008.
[43] J. Lin, X, Jing, X. Zhou, X. Zheng, R. Gao and Y. Wang, “Scaling Laws of Nanorods in Two-photon Polymerization Nanofabrication Using a Continuous Scanning Method”, AIP Advances, Vol. 6, No. 10, 105014, 2016.
[44] 曾竣煌,「熔融沉積成型技術之路徑規劃與提升製造效率研究」,國立中央大學,碩士論文,民國107年。
[45] Micro resist technology, “OrmoComp - UV Curable Hybrid Polymer for Moulding”, datasheet.
[46] Micro resist technology, “OrmoComp and OrmoClear FX”, datasheet.
[47] S. Aura, T. Sikanen, T. Kotiaho and S. Franssila, “Novel Hybrid Material for Microfluidic Devices”, Sensors and Actuators B: Chemical, Vol. 132, No. 2, pp. 397-403, 2008.
[48] SIGMA-ALDRICH, “661732 ALDRICH”, retrieved July 5, 2017, from http://www.sigmaaldrich.com/catalog/product/aldrich/661732.
[49] T. Stichel, B. Hecht, S. Steenhusen, R. Houbertz and G. Sextl, “Two-photon Polymerization Setup Enables Experimental Mapping and Correction of Spherical Aberrations for Improved Macroscopic Structure Fabrication”, Optics Letters, Vol. 41, No. 18, pp. 4269-4272, 2016.
[50] M. J. Nassue and J. C. Woehl, “Realistic Modeling of the Illumination Point Spread Function in Confocal Scanning Optical Microscopy”, Journal of the Optical Society of America A, Vol. 27, No. 2, pp. 295-302, 2010.
[51] 高健閔,「基於雙光子聚合技術之長軸成形法製造高深寬比結構」,國立中央大學,碩士論文,民國106年。
[52] M. G. Guney and G. K. Fedder, “Estimation of Line Dimensions in 3D Direct Laser Writing Lithography”, Journal of Micromechanics and Microengineering, Vol. 26, No. 10, 105011, 2016.
[53] H. B. Sun, K. Takada, M. S. Kim, K. S. Lee and S. Kawata, “Scaling Laws of Voxels in Two-photon Photopolymerization Nanofabrication”, Applied Physics Letters, Vol. 83, No. 6, pp. 1104-1106, 2003.
[54] B. Tan, K. Venkatakrishnan and A. Makaronets, “Effects of Pulsewidth on Two-photon Polymeization”, Designed Monomers and Polymers, Vol. 16, No. 2, pp. 145-150, 2012.
[55] T. W. Lim and D. Y. Yang, “Direct Fabrication of Nano-Wrinkled 3D Microstructures Using Fitfully Accumulated Two-photon Polymerization”, International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 11, pp. 2427-2431, 2015.
[56] S. H. Park, K. H. Kim, T. W. Lim, D. Y. Yang and K. S. Lee, “Investigation of Three-dimensional Pattern Collapse owing to Surface Tension Using an Imperfection Finite Element Model”, Microelectronic Engineering, Vol. 85, No. 2, pp. 432-439, 2007.
[57] J. D. Kim and Y. G. Lee, “Improvement of Distortion Error for Fabricating Precision Microparts Using Two-photon Photopolymerization”, Journal of Micromechanics and Microengineering, Vol. 26, No. 7, 075012, 2016.
[58] F. C. Wang, Y. Y. Chen, K. A. Wang and T. T. Chung, “The Development of a Long-stroke Precision Positioning Stage for Micro Fabrication by Two-photon Polymerization”, Journal of Micro/Nanoengineering, Vol. 11, No. 1, pp. 1-12, 2016.
[59] T. Bűckmann, N. Stenger, M. Kadic, J. Kaschke, A. Frőlich, T. Kennerknecht, C. Eberl, M. Thiel and M. Wegener, “Tailored 3D Mechanical Metamaterials Made by Dip-in Direct-laser-writing Optical Lithography”, Advanced Materials, Vol. 24, No. 20, pp, 2710-2714, 2012.
[60] C. W. Ha and D. Y. Yang, “Fabrication of Micro Open Structure Using 3D Laser Scanning Method in Nano-stereolithography”, International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, pp. 299-303, 2014.
|