博碩士論文 105323103 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:11 、訪客IP:18.207.102.38
姓名 羅日廷(Jih-Ting Lo)  查詢紙本館藏   畢業系所 機械工程學系
論文名稱 以Labview遠端控制輕量化機械手臂
相關論文
★ 應用於車身號碼打刻機之號碼辨識★ 複合式掌紋識別系統
★ 圓形偵測在OLED Panel 檢測上的應用★ MLCC薄膜厚度即時線上影像檢測技術之研發
★ 全自動微鑽針影像檢測系統之研究★ 應用類神經網路預測COG製程對於中小尺寸TFT-LCD產生之應力狀態
★ 應用機器視覺系統檢測高滲透壓刀輪切割 TFT-LCD 玻璃後斷面之研究★ 低成本輕量化機械手臂之研究
★ 應用在同軸電纜加工之雷射光斑導引機構設計與分析★ 表面電漿波共振-非旋轉方式的新機構設計理論
★ 網路協同式機械設計系統研發★ 軟膠囊自動辨識系統
★ 心電訊號之擷取與分析★ 盲人圖樣感知輔助裝置之研發設計
★ 非旋轉式表面電漿共振儀之改良與實現★ 可攜式無線心電訊號擷取器之設計
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   至系統瀏覽論文 (2023-5-30以後開放)
摘要(中) 隨著工業4.0的興起,許多生產線都開始減少人員配置走向自動化。工具機台配備著各式感測器來監控加工狀態,並且透過網路監控回授的數據以及調控參數,這使加工效率比起從前有了大幅的提升。而機械手臂在這個浪潮中扮演著很重要的角色,因為他可以代替工作人員進行精確的抓取動作,讓加工物件在各個加工機台間的移動,成為各個儀器交流的橋梁。
本文透過先前學長設計的機械手臂機構製造兩台機械手臂,推導此機構三維空間座標與馬達旋轉角度之轉換公式,並研究步進馬達以及伺服馬達分別之控制原理。我們透過Labview對伺服馬達與步進馬達組成之機械手臂分別進行控制,使兩隻手臂進行精準的座標移動。最後構築一個網路傳輸介面令使用者可以從遠端得知機械手臂目前之狀態,並且將使用者之命令傳送給伺服端,伺服端接受遠端使用者的路徑命令並使兩台機械手臂依照其進行運動。
最後透過精度實驗以及網路傳輸速度實驗驗證本論文之控制方法,確認使用者可以透過網路從遠端進行即時的資料接收與命令下達,並且機械手臂也能精準的完成使用者之座標命令。
摘要(英) With the rise of Industry 4.0, many factory start reducing staffing, and focus on automation. In order to do that, they put various kinds of sensors on the processing equipment, monitor the feedback information transmitted over the network, and control them. That makes the processing efficiency much better than before. The robotic arm plays a very important role in this trend. Because it can move the machined object from one processing equipment to another.
In this research, the robotic arm is produced by our laboratory. We derive the formula of the relationship between three-dimensional coordinates and motor rotation angle. And we study to use the step motor and servo motor to control the two robotic arms in Labview system. Finally, we design an internet transmission interface, so users can know the status of two robotic arms and control them by remote connection.
關鍵字(中) ★ 機械手臂
★ Labview
★ TCP/IP
關鍵字(英)
論文目次 摘要 vi
Abstract vii
誌謝 viii
圖目錄 xi
表目錄 xiv
第一章 緒論 1
1-1前言 1
1-2研究動機與目的 1
1-3文獻回顧 2
1-4內容架構 2
第二章 基礎理論 4
2-1步進馬達構造及原理 4
2-2步進馬達規格 7
2-3步進馬達驅動晶片 9
2-4伺服馬達機構與原理 11
2-5伺服馬達驅動器規格 13
2-6步進馬達與伺服馬達比較 15
第三章 研究方法 16
3-1機械手臂座標推導 16
3-2 Labview介紹 19
3-3微控制器MyRio 20
3-4步進馬達命令訊號 22
3-5伺服馬達控制訊號 23
3-6 Labview delay vi 間的差異 25
3-7 TCP/IP通訊 28
3-8藍芽 33
3-9座標陣列 35
3-10客戶端介面 39
3-11行動裝置介面 41
第四章 實驗結果與討論 44
4-1步進與伺服機械手臂重複精度實驗 44
4-2 伺服機械手臂位置精度實驗 53
4-3 TCP傳輸速度測試 56
第五章 結論與未來展望 64
5-1結論 64
5-2未來展望 65
參考資料 66
參考文獻 [1]R.Walter,”A Concept of Factory Automation”, IEEE Transactions on Manufacturing Technology,Vol 4, 1975, pp.56-58.
[2]Jeng-Dao Lee, Wei-Chuan Li, Jyun-Han Shen, Ching-Wei Chuang, “Multi-robotic arms automated production line”, International Conference on Control, Automation and Robotics (ICCAR), 2018, pp.26-30.
[3]Xinquan Liang, Haris Cheong, Yi Sun, Jin Guo, Chee Kong Chui, Chen-Hua Yeow, “Design, Characterization, and Implementation of a Two-DOF Fabric-Based Soft Robotic Arm”, IEEE Robotics and Automation Letters, 2018, Volume: 3, Issue: 3, pp.2702 – 2709.
[4]Nazar Ibhar, W. Flores; R. Leon, “Design of a low-cost teleoperated robotic arm: Assembly and performance testing”, IEEE 37th Central America and Panama Convention (CONCAPAN XXXVII), 2017, pp.1-5.
[5]Eamon Barrett, Mark Reiling; Giuseppe Barbieri, Matteo Fumagalli, Raffaella Carloni, “Mechatronic design of a variable stiffness robotic arm”, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2017, pp. 4582 – 4588.
[6]Debdeep Banerjee, Kevin Yu, “Robotic Arm-Based Face Recognition Software Test Automation”, IEEE Access, 2018, ( Early Access ), pp.1-1.
[7]Debdeep Banerjee, Kevin Yu, Garima Aggarwal, “Image Rectification Software Test Automation Using a Robotic ARM”, IEEE Access, 2018, Volume: 6, pp. 34075 – 34085.



[8]Yu-Sin Wu, Min-Liang Wang, N. Michael Mayer, “A new type of eye-on-hand robotic arm system based on a low-cost recognition system”, International Conference on Advanced Robotics and Intelligent Systems (ARIS), 2017, pp. 110 – 114.
[9]Tomasz Szczcsny, Maciej Recko, “Control of robotic arm for Mars rover analogue”, International Carpathian Control Conference (ICCC), 2018, pp. 259 – 264.
[10]Ondrej Hock, Jozef Sedo, “Inverse kinematics using transposition method for robotic arm”, ELEKTRO, 2018, pp.1-5.
[11]Haleema Asif, Ali Nasir, Umar T. Shami, Syed Tahir Hussain Rizvi, Muhammad Majid Gulzar, “Design and comparison of linear feedback control laws for inverse Kinematics based robotic arm”, International Conference on Emerging Technologies (ICET), 2017 , pp.1-6.
[12]Ankur Bhargava, Anjani Kumar, “Arduino controlled robotic arm”, International conference of Electronics, Communication and Aerospace Technology (ICECA), 2017, Volume: 2, pp.376-380.
[13]Rahul S. Pol; Sagar Giri, Aditya Ravishankar; Varsha Ghode, “LabVIEW based four DoF robotic ARM”, 3rd International Conference on Computing for Sustainable Global Development (INDIACom), 2016, pp. 2461 – 2464.
[14]Michal Ma?uga, “Control and positioning of robotic arm on CNC cutting machines and their applications in industry”, Cybernetics & Informatics (K&I), 2018, pp.1-6.
[15]Sulabh Kumra, Rajat Saxena, Shilpa Mehta, “Design and development of 6-DOF robotic arm controlled by Man Machine Interface”, IEEE International Conference on Computational Intelligence and Computing Research, 2012, pp.1-5.
[16]劉泳諒,低成本輕量化機械手臂之研究,國立中央大學機械工程學系機械工程碩士論文,2017
[17] Nidec Corporation, “Structure And OperationOf HB-type Motor”, 2-4-1.
[18] 鄒應嶼,交流伺服驅動系統簡介,1995。
[19] National Instruments, “Labview Help”, 2016.
[20] R. Jegan, W. S. Nimi, “Low cost and improved performance measures on filtering techniques for ECG signal processing and TCP/IP based monitoring using LabVIEW”, 4th International Conference on Advanced Computing and Communication Systems (ICACCS), 2017, pp.1-7.
指導教授 黃衍任(Yean-Ren Huang) 審核日期 2018-7-26
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明