參考文獻 |
[1] J. Li, E. Murphy, J. Winnick and P. A. Kohl, "Studies on the Cycle Life of Commercial Lithium Ion Batteries during Rapid Charge–Discharge Cycling," Journal of Power Sources, vol. 102, p. 294–301, 2001.
[2] R. J. Gummow, A. d. Kock and M. M. Thackeray, "Improved Capacity Retention in Rechargeable 4V Lithium/Lithium-Manganese Oxide (Spinel) Cells," Solid State Ionics, vol. 69, pp. 59-67, 1994.
[3] C. Curry, "Lithium-ion Battery Costs and Market, Squeezed Margins Seek Technology Improvements and New Business Models," Bloomberg New Energy Finance, New York, 2017.
[4] Y. Wu, Lithium-Ion Batteries Fundamentals and Applications, Florida, USA: CRC Press (Taylor & Francis Group), 2015.
[5] A. Midilli, I. Dincer and M. Ay, "Green Energy Strategies for Sustainable Development," Energy Policy, vol. 34, no. 18, pp. 3623-3633, 2006.
[6] N.-S. Choi, Z. Chen, S. A. Freunberger, X. Ji, Y.-K. Sun, K. Amine, G. Yushin, L. F. Nazar, J. Cho and P. G. Bruce, "Challenges Facing Lithium Batteries and Electrical Double?Layer Capacitors," Angewandte Chemie International Edition, pp. 9994-10024, 2012.
[7] J. M. Tarascon and M. Armand, "Issues and Challenges Facing Rechargeable Lithium Batteries," Nature, vol. 414, pp. 359-367, 2001.
[8] X. Su, Q. Wu, J. Li, X. Xiao, A. Lott, W. Lu, B. W. Sheldon and J. Wu, "Silicon-Based Nanomaterials for Lithium-Ion Batteries: A Review," Advance Energy Materials, vol. 4, pp. 1-23, 2014.
[9] B. Koo, H. Kim, Y. Cho, K. T. Lee, N.-S. Choi and J. Cho, "A Highly Cross-Linked Polymeric Binder for High-Performance Silicon Negative Electrodes in Lithium Ion Batteries," Angewandte Chemie International Edition, vol. 51, p. 8762 –8767, 2012.
[10] S. Hill and M. C. Galan, "Fluorescent Carbon Dots from Mono- and Polysaccharides: Synthesis, Properties and Applications," Beilstein Journal of Organic Chemistry, vol. 13, p. 675–693, 2017.
[11] P. G. Stansberry, J. W. Zondlo and A. H. Stiller, "Coal-Derived Carbons," in Carbon Materials for Advanced Technologies, Oak Ridge, Tennessee (USA), Pergamon (An Imprint of Elsevier Science), 1999, p. 205–234.
[12] L. F. King and W. D. Robertson, "A Comparison of Coal Tar and Petroleum Pitches as Electrode Binders," Fuel, vol. 47, pp. 197-212, 1968.
[13] J. M. Hutcheon, "Manufacture Technology of Baked and Graphitized Carbon Bodies," in Modern Aspects of Graphite Technology, New York (USA), Academic Press, 1970, pp. 49-78.
[14] M. Yoshio, R. J. Brodd and A. Kozawa, Lithium-Ion Batteries Science and Technologies, New York, USA: Springer, 2009.
[15] W. Luo, X. Chen, Y. Xia, M. Chen, L. Wang, Q. Wang, W. Li and J. Yang, "Surface and Interface Engineering of Silicon-Based Anode Materials for Lithium-Ion Batteries," Advanced Energy Materials, vol. 1701083, pp. 1-28, 2017.
[16] N. Liu, H. Wu, M. T. McDowell, Y. Yao, C. Wang and Y. Cui, "A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes," Nano Letters, vol. 12, p. 3315?3321, 2012.
[17] J. Wang, J. Yang and S. Lu, "A Mini Review: Nanostructured Silicon-based Materials for Lithium Ion Battery," Nanoscience & Nanotechnology-Asia, vol. 6, pp. 3-27, 2016.
[18] M. Yoshio, R. J. Brodd and A. Kozawa, Lithium-Ion Batteries Science and Technologies, New York: Springer Science & Business Media, 2009.
[19] X. H. Liu, L. Zhong, S. Huang, S. X. Mao, T. Zhu and J. Y. Huang, "Size-Dependent Fracture of Silicon Nanoparticles During Lithiation," ACS Nano, vol. 6, no. 2, p. 1522–1531, 2012.
[20] B. A. Boukamp, G. C. Lesh and R. A. Huggin, "All-Solid Lithium Electrodes with Mixed-Conductor Matrix," Journal of Electrochemical Society, vol. 128, no. 4, pp. 725-729, 1981.
[21] A. Casimir, H. Zhang, O. Ogoke, J. C. Amine, J. Lu and G. Wu, "Silicon-based Anodes for Lithium-ion Batteries: Effectiveness of Materials Synthesis and Electrode Preparation," Nano Energy, vol. 27, p. 359–376, 2016.
[22] X. Zuo, J. Zhua, P. Muller-Buschbaumb and Y.-J. Cheng, "Silicon based Lithium-ion Battery Anodes: A Chronicle Perspective Review," Nano Energy, vol. 31, p. 113–143, 2017.
[23] M. Ge, J. Rong, X. Fang and C. Zhou, "Porous Doped Silicon Nanowires for Lithium ion Battery Anode with Long Cycle Life," Nano letters, vol. 12, pp. 2318-2323, 2012.
[24] M. Ashuri, Q. Hea and L. L. Shaw, "Silicon As a Potential Anode Material for Li-ion Batteries: Where Size, Geometry and Structure Matter," Nanoscale, vol. 8, p. 74–103, 2016.
[25] A. F. Gonzalez, N.-H. Yang and R.-S. Liu, "Silicon Anode Design for Lithium-Ion Batteries: Progress and Perspectives," Journal of Physical Chemistry C, vol. 121, p. 27775?27787, 2017.
[26] Y. Cen, Q. Qin, R. D. Sisson and J. Liang, "Effect of Particle Size and Surface Treatment on Si/Graphene Nanocomposite Lithium-Ion Battery Anodes," Electrochimica Acta, vol. 251, pp. 690-698, 2017.
[27] H. Okamoto, "The Li-Si (Lithium-Silicon) System," Bulletin of Alloy Phase Diagrams, vol. 11, pp. 306-312, 1990.
[28] J. Cho, "Porous Si Anode Materials for lithium Rechargeable Batteries," Journal of Materials Chemistry (RSC), vol. 20, p. 4009–4014, 2010.
[29] U. Kasavajjula, C. Wang and A. J. Appleby, "Nano- and Bulk-Silicon-Based Insertion Anodes for Lithium-ion Secondary Cells," Journal of Power Sources, vol. 163, p. 1003–1039, 2007.
[30] M. B. Pinson and M. Z. Bazant, "Theory of SEI Formation in Rechargeable Batteries: Capacity Fade, Accelerated Aging and Lifetime Prediction," Journal of The Electrochemical Society, vol. 160, no. 2, pp. A243-A250, 2013.
[31] N. Nitta, F. Wu, J. T. Lee and G. Yushin, "Li-ion Battery Materials: Present and Future," Materials Today, vol. 18, no. 5, pp. 252-264, 2015.
[32] H. Wu, G. Zheng, N. Liu, T. J. Carney, Y. Yang and Y. Cui, "Engineering Empty Space between Si Nanoparticles for Lithium-Ion Battery Anodes," Nano Letters, vol. 12, no. 2, p. 904–909, 2012.
[33] H. Wu, G. Chan, J. W. Choi, I. Ryu, Y. Yao, M. T. McDowell, S. W. Lee, A. Jackson, Y. Yang, L. Hu and Y. Cui, "Stable Cycling of Double-Walled Silicon Nanotube Battery Anodes Through Solid–Electrolyte Interphase Control," Nature Nanotechnology, vol. 7, no. 5, pp. 310-315, 2012.
[34] J. S. Bridel, T. Azais, M. Morcrette, J. M. Tarascon and D. Larcher, "Key Parameters Governing the Reversibility of Si/Carbon/CMC Electrodes for Li-Ion Batteries," Chemistry of Materials, vol. 22, no. 3, p. 1229–1241, 2010.
[35] H. Shobukawa, J. Alvarado, Y. Yang and Y. S. Meng, "Electrochemical Performance and Interfacial Investigation on Si Composite Anode for Lithium Ion Batteries in Full Cell," Journal of Power Sources, vol. 359, pp. 173-181, 2017.
[36] M.-H. Ryou, G.-B. Han, Y. M. Lee, J.-N. Lee, D. J. Lee, Y. O. Yoon and J.-K. Park, "Effect of fluoroethylene carbonate on high temperature capacity retention of LiMn2O4/graphite Li-ion cells," Electrochimica Acta, vol. 55, no. 6, pp. 2073-2077, 2010.
[37] C. Xu, F. Lindgren, B. Philippe, M. Gorgoi, F. Bjorefors, K. Edstrom and T. Gustafsson, "Improved Performance of the Silicon Anode for Li-Ion Batteries: Understanding the Surface Modification Mechanism of Fluoroethylene Carbonate as an Effective Electrolyte Additive," Chemistry of Materials, vol. 27, p. 2591?2599, 2015.
[38] H. Wu, G. Chan, J. W. Choi, I. Ryu, Y. Yao, M. T. McDowell, S. W. Lee, A. Jackson, Y. Yang, L. Hu and Y. Cui, "Stable Cycling of Double-Walled Silicon Nanotube Battery Anodes through Solid–Electrolyte Interphase Control," Nature Nanotechnology, vol. 7, pp. 310-315, 2012.
[39] R. Yuge, A. Toda, K. Fukatsu, N. Tamura, T. Manako, K. Nakahara and K. Nakano, "Effect of Volume Expansion on SEI Covering Carbon-Coated Nano-Si/SiO Composite," Journal of The Electrochemical Society, vol. 160, no. 10, pp. A1789-A1793, 2013.
[40] S. Chen, L. Shen, P. A. v. Aken, J. Maier and Y. Yu, "Dual-Functionalized Double Carbon Shells Coated Silicon Nanoparticles for High Performance Lithium-Ion Batteries," Advanced Materials, vol. 1605650, pp. 1-8, 2017.
[41] Y.-S. Hu, R. D. Cakan, M.-M. Titirici, J.-O. Muller, R. Schlogl, M. Antonietti and J. Maier, "Superior Storage Performance of a Si@SiOx/C Nanocomposite as Anode Material for Lithium-Ion Batteries," Angewandte Chemie International Edition, vol. 47, p. 1645 –1649, 2008.
[42] X. Ma, Y. Liu, L. Kong, Y. Ding, J. Zhao and N. Xu, "Lithium-ion Battery Anode Electrochemical Properties of Si/C Composites Using Graphite and Glucose as Carbon Source," Advanced Materials Research, Vols. 347-353, pp. 3506-3509, 2012.
[43] R. Shaw, "ATA Scientific," 23 April 2013. [Online]. Available: http://149.171.168.221/partcat/wp-content/uploads/Malvern-Zetasizer-LS.pdf. [Accessed 26 June 2018].
[44] K. Kabezya and H. Motjotji, "The Effect of Ball Size Diameter on Milling Performance," Journal of Material Sciences & Engineering, vol. 4, no. 1, pp. 1-3, 2015.
[45] A. Fayyaz, N. Muhamad, A. B. Sulong, H. S. Yunn, S. Y. M. Amin and J. Rajabi, "Effect of Dry and Wet Ball Milling Process on Critical Powder Loading and Mixture Properties of Fine WC-10Co-0.8VC Powder," Jurnal Teknologi (Sciences & Engineering), vol. 59, p. 141–144, 2012.
[46] M.-G. Li, C.-J. Sun, S.-H. Gau and C.-J. Chuang, "Effects of Wet Ball Milling on Lead Stabilization and Particle Size Variation in Municipal Solid Waste Incinerator Fly Ash," Journal of Hazardous Materials, vol. 174, p. 586–591, 2010.
[47] R. R. Devarapalli, S. Szunerits, Y. Coffinier, M. V. Shelke and R. Boukherroub, "Glucose-Derived Porous Carbon-Coated Silicon Nanowires as Efficient Electrodes for Aqueous Micro-Supercapacitors," ACS Applied Materials Interfaces, vol. 8, pp. 4298-4302, 2016.
[48] D. Li, F. Tian, B. Chu, D. Duan, X. Sha, Y. Lv, H. Zhang, N. Lu, B. Liu and T. Cui, "Ab Initio Structure Determination of n-Diamond," Scientific Reports, vol. 5:13447, pp. 1-8, 2015.
[49] Y. Liu, A. Wiek, V. Dzhagan and R. Holzea, "Improved Electrochemical Behavior of Amorphous Carbon-Coated Copper/CNT Composites as Negative Electrode Material and Their Energy Storage Mechanism," Journal of The Electrochemical Society, vol. 163, no. 7, pp. A1247-A1253, 2016.
[50] Y.-J. Han, J. Kim, J.-S. Yeo, J. C. An, I.-P. Hong, K. Nakabayashi, J. Miyawaki, J.-D. Jung and S.-H. Yoon, "Coating of Graphite Anode with Coal Tar Pitch as an Effective Precursor for Enhancing the Rate Performance in Li-ion Batteries: Effects of Composition and Softening Points of Coal Tar Pitch," Carbon, vol. 94, p. 432–438, 2015.
[51] S. Chen, P. Bao, X. Huang, B. Sun and G. Wang, "Hierarchical 3D Mesoporous Silicon@Graphene Nanoarchitectures for Lithium Ion Batteries with Superior Performance," Nano Research, vol. 7, no. 1, p. 85–94, 2014.
[52] M. Marton, M. Vojs, E. Zdravecka, M. Himmerlich, T. Haensel, S. Krischok, M. Kotlar, P. Michniak, M. Vesely and R. Redhammer, "Raman Spectroscopy of Amorphous Carbon Prepared by Pulsed Arc Discharge in Various Gas Mixtures," Journal of Spectroscopy, vol. 2013: 467079, pp. 1-6, 2013.
[53] J. Schwan, S. Ulrich, V. Batori, H. Ehrhardt and S. R. P. Silva, "Raman Spectroscopy on Amorphous Carbon Films," Journal of Applied Physics, vol. 80, no. 1, pp. 440-447, 1996.
[54] A. C. Ferrari and J. Robertson, "Resonant Raman Spectroscopy of Disordered, Amorphous, and Diamondlike Carbon," Physical Review B, vol. 64, no. 2001: 075414, pp. 1-13, 2001.
[55] A. C. Ferrari and J. Robertson, "Raman Spectroscopy of Amorphous, Nanostructured, Diamond-like Carbon, and Nanodiamond," Philosophical Transactions of the Royal Society A, vol. 362, p. 2477–2512, 2004.
[56] H.-J. Scheibe, D. Drescher and P. Alers, "Raman Characterization of Amorphous Carbon Films," Fresenius′ Journal of Analytical Chemistry, vol. 353, no. 5–8, p. 695–697, 1995.
[57] PerkinElmer, "A Beginner’s Guide for Thermogravimetric Analysis (TGA)," Perkin Elmer, Inc., Massachusetts (USA), 2010.
[58] Z. P. Guo, E. Milin, J. Z. Wang, J. Chen and H.-K. Liu, "Silicon/Disordered Carbon Nanocomposites for Lithium-Ion Battery Anodes," Journal of The Electrochemical Society, vol. 152, no. 11, pp. A2211-A2216, 2005.
[59] Y.-X. Wang, S. Chou, H.-K. Liu and S. X. Dou, "Nanocomposites of Silicon and Carbon Derived from Coal Tar Pitch: Cheap Anode Materials for Lithium-Ion Batteries with Long Cycle Life and Enhanced Capacity," Electrochimica Acta, vol. 93, pp. 213-221, 2013.
[60] GamryInstruments, "Application Notes: Basics of Electrochemical Impedance Spectroscopy," Gamry Instruments, Inc., Warminster, PA, 2010.
[61] J. Yu, J. Yang, X. Feng, H. Jia, J. Wang and W. Lu, "Uniform Carbon Coating on Silicon Nanoparticles by Dynamic CVD Process for Electrochemical Lithium Storage," ACS Industrial & Engineering Chemistry Research, vol. 53, p. 12697?12704, 2014.
[62] P. Gao, J. Fu, J. Yang, R. Lv, J. Wang, Y. Nuli and X. Tang, "Microporous Carbon Coated Silicon Core/Shell Nanocomposite Via In Situ Polymerization for Advanced Li-ion Battery Anode Material," Physical Chemistry Chemical Physics, vol. 11, p. 11101–11105, 2009.
[63] Y. Xu, Y. Zhu and C. Wang, "Mesoporous Carbon/Silicon Composite Anodes with Enhanced Performance for Lithium-ion Batteries," Journal of Materials Chemistry A, vol. 2, p. 9751–9757, 2014.
[64] S. H. Ng, J. Wang, D. Wexler, S. Y. Chew and H. K. Liu, "Amorphous Carbon-Coated Silicon Nanocomposites: A Low-Temperature Synthesis via Spray Pyrolysis and Their Application as High-Capacity Anodes for Lithium-Ion Batteries," ACS Journal of Physical Chemistry Part C: Nanomaterials and Interfaces, vol. 111, no. 29, pp. 11131-11138, 2007.
[65] A. Shahverdi, K. S. Kim, Y. Alinejad, G. Soucy and J. Mostaghimi, "Selective Oxidation of Excess Amorphous Carbon during Single-Walled Carbon Nanotubes Synthesis by Induction Thermal Plasma Process," Journal of Nano Research, vol. 2, pp. 800-812, 2009.
[66] F. M. Wachid, A. Y. Perkasa, F. A. Prasetya, N. Rosyidah and Darminto, "Synthesis and Characterization of Nanocrystalline Graphite from Coconut Shell with Heating Process," in 5th Nanoscience and Nanotechnology Symposium by American Institute of Physics, Surabaya, 2014.
[67] S. Chen, Y. Xin, Y. Zhou, F. Zhang, Y. Ma, H. Zhou and L. Qi, "Branched CNT@SnO2 Nanorods@Carbon Hierarchical Heterostructures for Lithium Ion Batteries with High Reversibility and Rate Capability," Journal of Materials Chemistry A, vol. 2, pp. 15582-15589, 2014.
[68] B. Zhou, S. Yang, L. Wu, W. Wu, W. Wei, L. Chen, H. Zhang, J. Pan and X. Xiong, "Amorphous Carbon Framework Stabilized SnO2 Porous Nanowires as High Performance Li-ion Battery Anode Materials," RSC Advances, vol. 5, p. 49926–49932, 2015.
[69] J. Zhang, C. Zhang, S. Wu, X. Zhang, C. Li, C. Xue and B. Cheng, "High-Columbic-Efficiency Lithium Battery Based on Silicon Particle Materials," Nanoscale Research Letters, vol. 10, no. 395, pp. 1-5, 2015.
[70] N. Lavoie, F. M. Courtel, P. R. Malenfant and Y. Abu-Lebdeh, "Graphene-Based Composite Anodes for Lithium-Ion Batteries," in Nanostructure Science and Technology: Nanotechnology for Lithium-Ion Batteries, Ottawa, Canada, Springer Science & Business Media, 2013, pp. 117-162.
[71] M. T. McDowell, S. W. Lee, J. T. Harris, B. A. Korgel, C. Wang, W. D. Nix and Y. Cui, "In Situ TEM of Two-Phase Lithiation of Amorphous Silicon Nanospheres," Nano Letters, vol. 13, no. 2, p. 758–764, 2013.
[72] S. Iwamura, H. Nishihara and T. Kyotani, "Effect of Buffer Size around Nanosilicon Anode Particles for Lithium-Ion Batteries," Journal of Physical Chemistry C, vol. 116, p. 6004?6011, 2012.
[73] T. Huang, Y. Yang, K. Pu, J. Zhang, M. Gao, H. Pana and Y. Liu, "Linking Particle Size to Improved Electrochemical Performance of SiO Anodes for Li-ion Batteries," RSC Advances, vol. 7, p. 2273–2280, 2017.
[74] Z. Favors, W. Wang, H. H. Bay, Z. Mutlu, K. Ahmed, C. Liu, M. Ozkan and C. S. Ozkan, "Scalable Synthesis of Nano-Silicon from Beach Sand for Long Cycle Life Li-ion Batteries," Scientific Reports, vol. 7, pp. 1-7, 2014.
[75] J. J. Wu and W. R. Bennett, "Fundamental Investigation of Si Anode in Li-Ion Cells," in Institute of Electrical and Electronics Engineers (IEEE) Energy Tech Conference, Cleveland, US, 2012.
[76] Q. Xu, J. Li, Y. Yin, Y. Kong, Y. Guo and L. Wan, "Nano/Micro?Structured Si/C Anodes with High Initial Coulombic Efficiency in Li?Ion Batteries," Chemistry an Asian Journal, vol. 11, no. 8, pp. 1205-1209, 2016.
[77] C.-H. Yim, S. Niketic, N. Salem, O. Naboka and Y. Abu-Lebdeh, "Towards Improving the Practical Energy Density of Li-Ion Batteries: Optimization and Evaluation of Silicon: Graphite Composites in Full Cells," Journal of The Electrochemical Society, vol. 164, no. 1, pp. A6294-A6302, 2017.
[78] C.-H. Yim, F. M. Courtel and Y. Abu-Lebdeh, "A High Capacity Silicon–Graphite Composite as Anode for Lithium-ion Batteries Using Low Content Amorphous," Journal of Materials Chemistry A, vol. 1, p. 8234–8243, 2013.
[79] R. Yazami, Nanomaterials for Lithium-Ion Batteries Fundamentals and Applications, Florida, USA: CRC Press (Taylor & Francis Group), 2014.
[80] F. Beer and E. Johnston Jr., Mechanics of Materials, 2nd Edition, New York: McGraw-Hill, 1992.
[81] R. E. Sonntag and C. Borgnakke, Fundamentals of Thermodynamics, 7th Edition, Michigan: John Wiley & Sons Inc., 2009.
[82] B. Bhattarai, A. Pandey and D. A. Drabold, "Evolution of Amorphous Carbon Across Densities: An Inferential Study," Carbon, vol. 131, pp. 168-174, 2018.
[83] P. Kumar, M. Gupta, U. P. Deshpande, D. M. Phase, V. Ganesan and J. Stahn, "Density and Microstructure of a-C Thin Films," Materials Science [cond-mat.mtrl-sci], vol. 1801, pp. 1-6, 2018.
[84] W. A. Van Schalkwijk and B. Scrosati, Advances in Lithium-Ion Batteries, New York: Kluwer Academic Publisher, 2002.
[85] V. Etacheri, R. Marom, R. Elazari, G. Salitra and D. Aurbach, "Challenges in the Development of Advanced Li-ion Batteries: A Review," Energy & Environmental Science, vol. 4, no. 9, pp. 3243-3262, 2011.
[86] B. Simon and J.-P. Boeuve, "Rechargeable Lithium Electrochemical Cell". USA Patent 5626981, 05 June 1997.
[87] E. Markevich, G. Salitra and D. Aurbach, "Fluoroethylene Carbonate as an Important Component for the Formation of an Effective Solid Electrolyte Interphase on Anodes and Cathodes for Advanced Li-Ion Batteries," ACS Energy Letters, vol. 2, no. 6, p. 1337–1345, 2017.
[88] SigmaAldrich, "Sigma Aldrich (Merck)," 2018. [Online]. Available: https://www.sigmaaldrich.com. [Accessed 26 June 2018].
[89] L. Liu, J. Lyu, T. Lia and T. Zhao, "Well-Constructed Silicon-based Materials as High-Performance Lithium-ion Battery Anodes," Nanoscale, vol. 8, p. 701–722, 2016. |