| 摘要(英) |
In this paper, the current amplifier EM19-28030-A02 manufactured by Kollmorgen and the MOSFET driver board were used to realize the control of the bearingless centrifugal pump. The PID controller was designed in the position loop and the current loop to control the magnetic bearing system. The PI controller, the disturbance observer, and the feedforward compensator were used to control permanent magnet synchronous motor. Reached the rated speed in the no-load state.
In the experiment, the digital signal processor TM320F28335 produced by Texas Instruments was used as the core processor, and Code Composer Studio was used as the software compilation development environment to introduce the control algorithm into the bearingless synchronous motor system. The experimental steps were as follows: firstly float up the magnetic rotor, and then issue the speed command to run to 3000 rpm. Then introduce another set of more robust position PID controller parameters in Gain Scheduling mode, and analyze the rotor trajectory-control current relationship.
|
| 參考文獻 |
參考文獻
[1] S. Earnshaw. “On the nature of the molecular forces which regulate the constitution of the lumiferous ether, ” Trans. Camb. Phil. Soc., 7, Part I:97–112, 1842.
[2] Schweitzer, E. Maslen, “Magnetic Bearings- Theory, Design and Apply to Rotating Machinery,” Springer, 2009.
[3] Klaus Raggl, Thomas Nussbaumer and Johann W. Kolar, “A Comparison of Separated and Combined Winding Concepts for Bearingless Centrifugal Pumps”, Journal of Power Electronics, Vol.9, pp.243-258, 2009.
[4] 朱俊，邓智泉，王晓琳，廖启新, “单绕组无轴承永磁薄片电机的原理和实现,” 中国电机工程学报, vol. 28, no. 33, pp.68-74, Nov. 2008.
[5] Qinan Li , Pascal Boesch , Mario Haefliger , Johann W.Kolar , Dehong Xu, “Basic Characteristics of a 4kW Permanent-magnet Type Bearingless Slice Motor for Centrifugal Pump System,” IEEE International Conference on Electrical Machines and Systems , pp.3037-3042, 2009.
[6] H.A. Toliyat and S.G. Campbell, DSP-BASED Electormechanical Motion Control, CRC Press, 2003.
[7] Reto Schob, Thomas Gempp,2002, Electrical Rotary Drive. U.S.Patent No.09/560,826
[8] 張佑毓，“初始位置估測與高頻注入法啟動應用於內藏式永磁同步馬達無感測器驅動”，國立中央大學，碩士論文，民國105年。
[9] R.H.Park , “Two-reaction Theory of Synchronus machines-Genearalized Method of Analysis-Part I,” AIEE Trans. , Vol. 48, pp.716-727,July ,1929
[10] W.H. Yao, P.C. Tung, C.C Fuh, and F.C. Chou, “A Robust Uncertainty Controller With System Delay Compensation for an ILPMSM System With Unknown System Parameters”, IEEE Trans. on Industrial Electronics, Vol. 58,No. 10, Oct.2011.
[11] 李冠賢， “雙軸馬達同步控制研究”，國立中央大學，碩士論文，台灣，民國104年。
[12] 葉品良， “智慧型運動控制器之研發”，國立中央大學，碩士論文，台灣，民國104年。
[13] 謝佳倫， “兩相同步薄片型無軸承馬達磁浮轉子控制”，國立中央大學，碩士論文，台灣，民國107年。
|
[Endnote RIS 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
至系統瀏覽論文 (2024-7-1以後開放)
plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
Google bookmarks
del.icio.us
hemidemi
facebook
twitter
google
reddit