 |
|
|
|
以作者查詢圖書館館藏 、以作者查詢臺灣博碩士 、以作者查詢全國書目 、勘誤回報 、線上人數：43 、訪客IP：3.12.151.242
姓名 謝承育(Cheng-Yu Hsieh) 查詢紙本館藏 畢業系所 太空科學與工程研究所 論文名稱 高光譜儀的光機構分析與模擬
(Opto-mechanical analysis and simulation of the HyperSCAN)相關論文 檔案 [Endnote RIS 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
至系統瀏覽論文 (2025-7-15以後開放)
摘要(中) Hyper-SCAN為中央大學太空科技中心之計畫中交由本團隊設
計製作之高光譜儀系統，預計搭載於 12U的立方衛星上 。 此高光譜
儀之特色為利用較低的成本製作出體積小、重量輕的機構。儀器使
用推掃式方法來獲取高光譜影像，視角大約在 5.8度，具連續光譜
範圍為 460nm~650 nm以及高光譜分辨率 (~ 1nm)。
本論文之目的在於對高光譜儀之工程體進行組裝以及校正實
驗，包含焦平面校正、 FOV量測、波長校正等實驗室內實驗，以改
善目前缺失以及建議未來的版本。另外高光譜儀系統的成敗關鍵最
重要的是焦平面的成像位置，我們利用實際 的組裝實驗以及光譜量
測，來估計對焦平面距離的影響。並且使用 ANSYS進行機構模
擬，包含熱分析、模態分析、暫態結構分析、隨機 振 動分析等，用
來評估高光譜飛行體的效能影響。摘要(英) Hyper-SCAN (Spectral Camera A Nalyzer) is a hyperspectral imager, one of the scientific payloads onboard the 12U CubeSat, designed and ensemble by the Space Optics Laboratory Center for Astronautical Physics & Engineering, National Central University. The key features of this hyperspectral imager have a compact size, lightweight, and low cost. The Hyper-SCAN adopts a push-broom method to acquire hyperspectral images with a FOV (5.8 degrees), a continuous visual band (460-650 nm), and a high-resolution bandwidth (~1nm).
In this thesis, we calibrated the hyperspectral imager system and study the caused errors in the distance of the focal plane due to the integration process and its space environment. We utilize the assembling experiment and spectral measurement results to evaluate the impacts on the focal plane. Using ANSYS, we also simulate the changing effects of optical mechanism on the Hyper-SCAN through thermal analysis, modal analysis, transient structural analysis and random vibration analysis. These analysis results will be used to improve and guarantee the performance of the Hyper-SCAN flight model.關鍵字(中) ★ 高光譜儀 關鍵字(英) ★ Hyperspectral imaging 論文目次 摘要............................................................... I
Abstract ............................................................ II
目錄.............................................................. III
圖目錄............................................................. VI
表目錄........................................................... VIII
第一章 緒論......................................................... 1
1.1 科學目標 ...................................................... 2
1.2 論文架構 ...................................................... 2
第二章 高光譜儀系統................................................. 4
2.1高光譜儀成像原理 .............................................. 4
2.1.1 光柵/稜鏡型 ............................................... 4
2.1.2 濾波片型 .................................................. 6
2.1.3 干涉成像型 ................................................ 6
2.2 高光譜儀機構 .................................................. 7
2.2.1 鏡頭 ...................................................... 8
2.2.2 反射鏡 ................................................... 10
2.2.3 光柵
................................................ 10
2.2.4 影像感測器 ............................................... 10
2.3 高光譜儀系統組裝 ............................................. 12
2.3.1 表面微弧處理 ............................................. 12
2.3.2 鏡片黏貼 ................................................. 14
2.3.2.1
2.3.2.1 鏡片黏貼器材鏡片黏貼器材.................................................................................. 1414
2.3.2.2
2.3.2.2 鏡片黏貼步驟鏡片黏貼步驟.................................................................................. 1717
2.3.3 機構量測 ................................................. 18
第三章 實驗室校正.................................................. 20
3.1 焦平面校正實驗 ............................................... 20
3.1.1 焦平面校正目的 ........................................... 20
3.1.2 實驗器材與配置 ........................................... 21
3.1.3 實驗步驟 ................................................. 23
3.1.4 實驗結果 ................................................. 24
3.2 FOV量測 .................................................... 27
3.2.1 FOV量測目的 ............................................ 27
3.2.2 實驗器材與配置 ........................................... 27
3.2.3 實驗步驟 ................................................. 28
3.2.4 實驗結果 ................................................. 29
3.3波長校正實驗 ................................................. 31
3.3.1 波長校正目的 ............................................. 31
3.3.2 實驗器材配置 ............................................. 31
3.3.3 實驗步驟 ................................................. 33
3.3.4 實驗結果 ................................................. 34
第四章 有限元素模擬................................................ 39
4.1模擬相關設定 ................................................. 39
4.1.1有限元素模型 ............................................. 40
4.1.2材料屬性 ................................................. 41
4.1.3網格劃分 ................................................. 42
4.2 熱分析 ....................................................... 44
4.2.1 穩態熱分析 ............................................... 44
4.2.2 熱應力分析 ............................................... 47
4.3振動分析 ..................................................... 51
4.3.1模態分析 ................................................. 51
4.3.2 暫態結構分析 ............................................. 53
4.3.3 隨機振動分析 ............................................. 57
第五章 結論與未來工作.............................................. 62
5.1 結論 ......................................................... 62
5.2 未來工作 ..................................................... 64
參考資料........................................................... 65參考文獻 [1] Adam, Elhadi, Onisimo Mutanga, and Denis Rugege. "Multispectral and hyperspectral remote sensing for identification and mapping of wetland vegetation: a review." Wetlands Ecology and Management 18.3 (2010): 281-296.
[2] Govender, Megandhren, Kershani Chetty, and Hartley Bulcock. "A review of hyperspectral remote sensing and its application in vegetation and water resource studies." Water Sa 33.2 (2007): 145-151.
[3] Feng, Yao-Ze, and Da-Wen Sun. "Application of hyperspectral imaging in food safety inspection and control: a review." Critical reviews in food science and nutrition 52.11 (2012): 1039-1058.
[4] Swain, Philip H., and Shirley M. Davis. "Remote sensing: The quantitative approach." IEEE Transactions on Pattern Analysis & Machine Intelligence 6 (1981): 713-714.
[5] Shaw, Gary A., and Hsiaohua K. Burke. "Spectral imaging for remote sensing." Lincoln laboratory journal 14.1 (2003): 3-28.
[6] Lillesand, Thomas, Ralph W. Kiefer, and Jonathan Chipman. Remote sensing and image interpretation. John Wiley & Sons, 2015.
[7] Vane, Gregg, and Alexander FH Goetz. "Terrestrial imaging spectrometry: current status, future trends." remote Sensing of Environment 44.2-3 (1993): 117-126.
[8] Prieto-Blanco, X., et al. "Analytical design of an Offner imaging spectrometer." Optics Express 14.20 (2006): 9156-9168.
[9] Datasheet-Spectrometers.
https://www.horiba.com/fileadmin/uploads/Scientific/Documents/OEM/cp140.pdf
[10] Mouroulis, Pantazis Z., and Michael M. McKerns. "Pushbroom imaging spectrometer with high spectroscopic data fidelity: experimental demonstration." Optical Engineering 39.3 (2000): 808-816.
[11] Datasheet- NIKKOR 50mm f/1.2 Ai-S
https://www.kenrockwell.com/nikon/50mm-f12.htm
[12] Datasheet-WAT-078H.
https://www.watec.co.jp/image/news/news_1703.html
[13] NASA Low Outgassing https://www.masterbond.com/certifications/nasa-low-outgassing
[14] 涂家豪, 立方衛星高光譜儀成像系統開發以及校正立方衛星高光譜儀成像系統開發以及校正, 國立中央大國立中央大學, 2020
[15] Tyc, G., 2008. High performance optical imagingpayloads for small sat missions, 22nd Annual AIAA/USU Conference on Small Satellites, 11.
[16] Ding, Y., 2004. A thermo-optical analysis method for a space optical remote sensor optostructural system, Opt. Eng., (43): 2730.
[17] 李輝煌李輝煌,””ansys工程與分析工程與分析-基礎與觀念基礎與觀念””,高立圖書有限公高立圖書有限公司司,2006.
[18] SpaceX Rideshare Payload Guide指導教授 郭政靈(Cheng-Ling Kuo) 審核日期 2021-7-20 推文 plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
網路書籤 Google bookmarks
del.icio.us
hemidemi
facebook
twitter
google
reddit