參考文獻 |
[1] F. L. Litvin, Theory of Gearing, Washinton D.C.:NASA Reference Publication 1212, 1989.
[2] F. L. Litvin and A. Fuentes, Gear Geometry and Applied Theory, Second Edition. Cambridge:Cambridge Univerisity Press, New York, 2004.
[3] W. L. Janninck, “Shaper Cutters-Design & Applications Part 1,” Gear Technology, Mar./Apr., pp. 35-44, 1990. [Online]. Available: https://www.geartechnology.com/articles/0390/Shaper_Cutters-Design_~amp;_Applications_Part_1/. [Accessed Sept. 29, 2020].
[4] W. L. Janninck, “Shaper Cutters - Design & Application - Part 2,” Gear Technology, May/June, pp. 38-45, 1990. [Online]. Available: https://www.geartechnology.com/articles/0590/Shaper_Cutters_-_Design_~amp;_Application_-_Part_2/. [Accessed Sept. 29, 2020].
[5] Pfauter-Maag Cutting Tools, “Isoform Shaper Cutters Facts and Features...,” Batom Co., Ltd.
[6] R. N. Green and H. H. Mabie, “Determination of static tooth stresses in nonstandard spur gears cut by pinion cutter,” Mech. Mach. Theory, vol. 15, no. 6, pp. 507-514, 1980.
[7] R. N. Green and H. H. Mabie, “Determination of pinion-cutter offsets required to produce nonstandard spur gears with teeth of equal strength,” Mech. Mach. Theory, vol. 15, no. 6, pp. 491-506, 1980.
[8] S. M. Vijayakar, B. Sarkar, D. R. Houser, “Gear Tooth Profile Determination From Arbitrary Rack Geometry,” Gear Technology, Nov/Dec., pp. 18-30, 1988. [Online]. Available: https://www.geartechnology.com/articles/1188/Gear_Tooth_Profile_Determination_From_Arbitrary_Rack_Geometry/. [Accessed Sept. 29, 2020].
[9] C.-B. Tsay, W.-Y. Liu, and Y.-C. Chen, “Spur gear generation by shaper cutters,” Journal of Materials Processing Technology, vol. 104, no. 3, pp. 271-279, 2000.
[10] 莊曄,「齒輪鉋齒加工參數研究」,碩士,機械系,國立中正大學,嘉義縣,2004。
[11] C.-L. Huang, Z.-H. Fong, S.-D. Chen, and K.-R. Chang, “Profile correction of a helical gear shaping cutter using the lengthwise-reciprocating grinding method,” Mech. Mach. Theory, vol. 44, no. 2, pp. 401-411, 2009.
[12] C.-L. Huang, Z.-H. Fong, S.-D. Chen, and K.-R. Chang, “Novel Third-Order Correction for a Helical Gear Shaping Cutter Made by a Lengthwise-Reciprocating Grinding Process,” Journal of Mechanical Design, vol. 131, no. 5, 2009.
[13] C.-L. Huang and Z.-H. Fong, “Modified-Roll Profile Correction for a Gear Shaping Cutter Made by the Lengthwise-Reciprocating Grinding Process,” Journal of Mechanical Design, vol. 133, no. 4, 2011.
[14] W. v. Pittler and G. Adams, “Verfahren zum Schneiden von Zahnrädern mittels eines zahnradartigen, an den Stirnflächen der Zähne mit Schneidkanten versehenen Schneidwerkzeugs,” Deutsche Patentschrift, no. 243514, 1910.
[15] K. Nishijima and M. Kojima, “Skiving cutter device for use in cutting internal spur gear,” United States Patent, no. 3931754, 1976.
[16] K. Nishijima and M. Kojima, “Skiving cutter for use in cutting internal spur gear,” United States Patent, no. 4066001, 1978.
[17] M. Kojima and K. Nishijima, “Gear Skiving of Involute Internal Spur Gear : (Part 1. On the Tooth Profile),” Bulletin of JSME, vol. 17, no. 106, pp. 511-518, 1974.
[18] F. Seibicke and H. Müller, “Good Things Need Some Time,” GEARSolutions, Aug., pp. 74-80, 2013. [Online]. Available: https://gearsolutions.com/features/good-things-need-some-time/. [Accessed Sept. 16, 2020].
[19] H. J. Stadtfeld, “Power Skiving of Cylindrical Gears on Different Machine Platforms,” Gear Technology, Jan./Feb., pp. 52-62, 2014. [Online]. Available: https://www.geartechnology.com/articles/0114/Power_Skiving_of_Cylindrical_Gears_on_Different_Machine_Platforms/. [Accessed Sept. 16, 2020].
[20] N. Bylund, “Understanding the Basic Principles of Power Skiving,” GEARSolutions, Apr. pp. 42-46, 2017. [Online]. Available: https://gearsolutions.com/features/understanding-the-basic-principles-of-power-skiving/. [Accessed Sept. 29, 2020].
[21] J.-L. Feutren, “Worm Screw High-Speed Manufacturing,” GEARSolutions, June, pp. 32-39, 2017. [Online]. Available: https://gearsolutions.com/features/worm-screw-high-speed-manufacturing/. [Accessed Sept. 29, 2020].
[22] E. Guo, R. Hong, X. Huang, and C. Fang, “Research on the design of skiving tool for machining involute gears,” Journal of Mechanical Science and Technology, vol. 28, no. 12, pp. 5107-5115, 2014.
[23] E. Guo, R. Hong, X. Huang, and C. Fang, “A correction method for power skiving of cylindrical gears lead modification,” Journal of Mechanical Science and Technology, vol. 29, no. 10, pp. 4379-4386, 2015.
[24] E. Guo, R. Hong, X. Huang, and C. Fang, “Research on the cutting mechanism of cylindrical gear power skiving,” The International Journal of Advanced Manufacturing Technology, vol. 79, no. 1, pp. 541-550, 2015.
[25] Z. Guo, S.-M. Mao, X.-E. Li, and Z.-Y. Ren, “Research on the theoretical tooth profile errors of gears machined by skiving,” Mech. Mach. Theory, vol. 97, pp. 1-11, 2016.
[26] Z. Guo, S.-M. Mao, X.-F. Du, and Z.-Y. Ren, “Influences of tool setting errors on gear skiving accuracy,” The International Journal of Advanced Manufacturing Technology, vol. 91, no. 9, pp. 3135-3143, 2017.
[27] F. Klocke, C. Brecher, C. Löpenhaus, P. Ganser, J. Staudt, and M. Krömer, “Technological and Simulative Analysis of Power Skiving,” Procedia CIRP, vol. 50, pp. 773-778, 2016.
[28] 李昀浚,「漸開線型圓柱齒輪之強力刮齒數學模式」,碩士,機械工程系,國立臺灣科技大學,台北市,2016。
[29] Y.-P. Shih and Y.-J. Li, “A Novel Method for Producing a Conical Skiving Tool With Error-Free Flank Faces for Internal Gear Manufacture,” Journal of Mechanical Design, vol. 140, no. 4, 2018.
[30] P. Wang, J. Li, and Y.-Q. Jin, “A study on the design of slicing cutter for cycloid gear based on conjugate theory,” The International Journal of Advanced Manufacturing Technology, vol. 98, no. 5, pp. 2057-2068, 2018.
[31] F. Zheng, M. Zhang, W. Zhang, and X. Guo, “Research on the Tooth Modification in Gear Skiving,” Journal of Mechanical Design, vol. 140, no. 8, 2018.
[32] K. Jia, S. Zheng, J. Guo, and J. Hong, “A surface enveloping-assisted approach on cutting edge calculation and machining process simulation for skiving,” The International Journal of Advanced Manufacturing Technology, vol. 100, no. 5, pp. 1635-1645, 2019.
[33] N. Tapoglou, “Calculation of non-deformed chip and gear geometry in power skiving using a CAD-based simulation,” The International Journal of Advanced Manufacturing Technology, vol. 100, no. 5, pp. 1779-1785, 2019.
[34] PITTLER, “PITTLER SKIVELINE - THE GEAR CUTTING MACHINE THAT CAN DO MORE THAN JUST GEAR CUTTING,” PITTLER, [Online]. Available: http://pittler.dvs-gruppe.com/index.php?id=1096&L=1. [Accessed Aug. 04, 2020].
[35] PITTLER, “PITTLER SkiveLine - Efficiently geared. Completely machined.,” PITTLER, [Online]. Available: http://pittler.dvs-gruppe.com/uploads/tx_xpctypedownloadssimple/PITTLER-SkiveLine-EN.pdf. [Accessed Aug. 04, 2020].
[36] Gleason, “Power Skiving,” Gleason, [Online]. Available: https://www.gleason.com/en/products/machines/cylindrical/power-skiving. [Accessed Aug. 04, 2020].
[37] Gleason, “300PS - The Universal, Easily Automated Machine,” Gleason, [Online]. Available: https://www.gleason.com/en/products/machines/cylindrical/power-skiving/300ps-the-universal-easily-automated-machine. [Accessed Aug. 04, 2020].
[38] Gleason, “160CPS - Getting It Right The First Time,” Gleason, [Online]. Available: https://www.gleason.com/en/products/machines/cylindrical/power-skiving/160cps-getting-it-right-the-first-time. [Accessed Aug. 04, 2020].
[39] Profilator, “SCUDDING® - internal & external gears,” Profilator, [Online]. Available: https://www.profilator.de/en/technologies/scudding-internal-external-gears/. [Accessed Aug. 04, 2020].
[40] DATHAN, “Power Skiving,” DATHAN, [Online]. Available: http://www.dathan.co.uk/products/power-skiving. [Accessed Aug. 04, 2020].
[41] I. O. f. Standardization, “ISO 1328-1:2013(en) Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth,” International Organization for Standardization, 2013. [Online]. Available: https://www.iso.org/obp/ui/#iso:std:iso:1328:-1:ed-2:v1:en. [Acce-ssed Sept. 16, 2020].
[42] 杜基成,「創成螺旋鉋齒刀之砂輪輪廓設計與最佳化」,碩士,機械工程學系, 國立中央大學,桃園縣,2019。
[43] 黃浩洋,「動力刮削創成內正齒輪之刀具齒形輪廓最佳化設計」,碩士,機械工程學系,國立中央大學,桃園縣,2019。
[44] D. I. f. Normung, “DIN-3962-1 -Tolerances for Cylindrical Gear Teeth,” Deutsches Institut für Normung ,1978.
[45] I. O. f. Standardization, “ISO 21771:2007(en) Gears — Cylindrical involute gears and gear pairs — Concepts and geometry,” International Organization for Standardization, 2007. [Online]. Available: https://www.iso.org/obp/ui/#iso:std:iso:21771:ed-1:v1:en. [Accessed Sept. 16, 2020].
[46] S. S. Rao, Engineering Optimization: Theory and Practice, Fourth Edition. New Jersey:John Wiley and Sons, 2009.
[47] MathWorks, “Global Optimization Toolbox,” MathWorks, [Online]. Available: https://www.mathworks.com/products/global-optimization.html#global-search-multistart. [Accessed Aug. 13, 2020].
[48] MathWorks. "How GlobalSearch and MultiStart Work,” MathWorks, [Online]. Available: https://www.mathworks.com/help/gads/how-globalsearch-and-multistart-work.html. [Accessed Aug. 13, 2020].
[49] Z. Ugray, L. Lasdon, J. Plummer, F. Glover, J. Kelly, and R. Martí, "Scatter Search and Local NLP Solvers: A Multistart Framework for Global Optimization," INFORMS Journal on Computing, vol. 19, no. 3, pp. 328-340, 2007.
[50] MathWorks. “Choosing the Algorithm,” MathWorks, [Online]. Available: https://www.mathworks.com/help/optim/ug/choosing-the-algorithm.html#bsbwxm7. [Accessed Aug. 13, 2020].
[51] MathWorks. ‘fmincon,” MathWorks, [Online]. Available: https://www.mathworks.com/help/optim/ug/fmincon.html. [Accessed Aug. 13, 2020].
[52] MathWorks. “Constrained Nonlinear Optimization Algorithms,” MathWorks, [Online]. Available: https://www.mathworks.com/help/optim/ug/constrained-nonlinear-optimization-algorithms.html#brnpd5f. [Accessed Aug. 13, 2020]. |