參考文獻 |
[1] Yang, H., Wang, C., Liu, C., Chen, H., Wu, Y., Han, J., ... & Yuan, W. (2017). Evolution of the degradation mechanism of pure zinc stent in the one-year study of rabbit abdominal aorta model. Biomaterials, 145, 92-105.
[2] Kraus, T., Fischerauer, S., Treichler, S., Martinelli, E., Eichler, J., Myrissa, A., ... & Weinberg, A. M. (2018). The influence of biodegradable magnesium implants on the growth plate. Acta biomaterialia, 66, 109-117.
[3] Yu, Y., Lu, H., & Sun, J. (2018). Long-term in vivo evolution of high-purity Mg screw degradation—Local and systemic effects of Mg degradation products. Acta biomaterialia, 71, 215-224.
[4] Hermawan, H. (2018). Updates on the research and development of absorbable metals for biomedical applications. Progress in biomaterials, 7(2), 93-110.
[5] Tong, X., Shi, Z., Xu, L., Lin, J., Zhang, D., Wang, K., ... & Wen, C. (2020). Degradation behavior, cytotoxicity, hemolysis, and antibacterial properties of electro-deposited Zn–Cu metal foams as potential biodegradable bone implants. Acta Biomaterialia, 102, 481-492.
[6] Murakami, M., & Hirano, T. (2008). Intracellular zinc homeostasis and zinc signaling. Cancer science, 99(8), 1515-1522.
[7] Tapiero, H., & Tew, K. D. (2003). Trace elements in human physiology and pathology: zinc and metallothioneins. Biomedicine & Pharmacotherapy, 57(9), 399-411.
[8] Li, H. F., Xie, X. H., Zheng, Y. F., Cong, Y., Zhou, F. Y., Qiu, K. J., ... & Qin, L. (2015). Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr. Scientific reports, 5, 10719.
[9] Shi, Z. Z., Yu, J., Liu, X. F., Zhang, H. J., Zhang, D. W., Yin, Y. X., & Wang, L. N. ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬. Effects of Ag, Cu or Ca addition on microstructure and comprehensive properties of biodegradable Zn-0.8 Mn alloy. Materials Science and Engineering: C, 99, 969-978.
[10] Zhao, S., Seitz, J. M., Eifler, R., Maier, H. J., Guillory II, R. J., Earley, E. J., ... & Drelich, J. W. (2017). Zn-Li alloy after extrusion and drawing: structural, mechanical characterization, and biodegradation in abdominal aorta of rat. Materials Science and Engineering: C, 76, 301-312.
[11] Tang, Z., Huang, H., Niu, J., Zhang, L., Zhang, H., Pei, J., ... & Yuan, G. (2017). Design and characterizations of novel biodegradable Zn-Cu-Mg alloys for potential biodegradable implants. Materials & Design, 117, 84-94.
[12] Venezuela, J., & Dargusch, M. S. (2019). The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: a comprehensive review. Acta biomaterialia.
[13] Trumbo, P., Yates, A. A., Schlicker, S., & Poos, M. (2001). Dietary reference intakes: vitamin A, vitamin K, arsenic, boron, chromium, copper, iodine, iron, manganese, molybdenum, nickel, silicon, vanadium, and zinc. Journal of the Academy of Nutrition and Dietetics, 101(3), 294.
[14] Gérard, C., Bordeleau, L. J., Barralet, J., & Doillon, C. J. (2010). The stimulation of angiogenesis and collagen deposition by copper. Biomaterials, 31(5), 824-831.
[15] Liu, C., Fu, X., Pan, H., Wan, P., Wang, L., Tan, L., ... & Chu, P. K. (2016). Biodegradable Mg-Cu alloys with enhanced osteogenesis, angiogenesis, and long-lasting antibacterial effects. Scientific reports, 6, 27374.
[16] Chouirfa, H., Bouloussa, H., Migonney, V., & Falentin-Daudré, C. (2019). Review of titanium surface modification techniques and coatings for antibacterial applications. Acta biomaterialia, 83, 37-54.
[17] Li, J., Zhai, D., Lv, F., Yu, Q., Ma, H., Yin, J., ... & Wu, C. (2016). Preparation of copper-containing bioactive glass/eggshell membrane nanocomposites for improving angiogenesis, antibacterial activity and wound healing. Acta biomaterialia, 36, 254-266.
[18] Romero-Sánchez, L. B., Marí-Beffa, M., Carrillo, P., Medina, M. Á., & Díaz-Cuenca, A. (2018). Copper-containing mesoporous bioactive glass promotes angiogenesis in an in vivo zebrafish model. Acta biomaterialia, 68, 272-285.
[19] Bari, A., Bloise, N., Fiorilli, S., Novajra, G., Vallet-Regí, M., Bruni, G., ... & Vitale-Brovarone, C. (2017). Copper-containing mesoporous bioactive glass nanoparticles as multifunctional agent for bone regeneration. Acta biomaterialia, 55, 493-504.
[20] Venkataprasanna, K. S., Prakash, J., Vignesh, S., Bharath, G., Venkatesan, M., Banat, F., ... & Venkatasubbu, G. D. (2020). Fabrication of Chitosan/PVA/GO/CuO patch for potential wound healing application. International Journal of Biological Macromolecules, 143, 744-762.
[21] Wentao, W., Tao, Z., Bulei, S., Tongchang, Z., Qicheng, Z., Fan, W., ... & Yi, S. (2019). Functionalization of polyvinyl alcohol composite film wrapped in am-ZnO@CuO@Au nanoparticles for antibacterial application and wound healing. Applied Materials Today, 17, 36-44.
[22] Madden, J. D., & Hunter, I. W. (1996). Three-dimensional microfabrication by localized electrochemical deposition. Journal of microelectromechanical systems, 5(1), 24-32.
[23] Zangari, G. (2015). Electrodeposition of alloys and compounds in the era of microelectronics and energy conversion technology. Coatings, 5(2), 195-218.
[24] Brenner, A. (2013). Electrodeposition of alloys: principles and practice. Elsevier.
[25] Kotsakis, N., Raptopoulou, C. P., Tangoulis, V., Terzis, A., Giapintzakis, J., Jakusch, T., ... & Salifoglou, A. (2003). Correlations of Synthetic, Spectroscopic, Structural, and Speciation Studies in the Biologically Relevant Cobalt (II)− Citrate System: The Tale of the First Aqueous Dinuclear Cobalt (II)− Citrate Complex. Inorganic chemistry, 42(1), 22-31.
[26] Rode, S., Henninot, C., Vallières, C., & Matlosz, M. (2004). Complexation chemistry in copper plating from citrate baths. Journal of the Electrochemical Society, 151(6), C405-C411.
[27] Chassaing, E., Quang, K. V., & Wiart, R. (1986). Kinetics of copper electrodeposition in citrate electrolytes. Journal of Applied Electrochemistry, 16(4), 591-604.
[28] Kazimierczak, H., Szymkiewicz, K., Rogal, Ł., Gileadi, E., & Eliaz, N. (2018). Direct current electrodeposition of Zn-SiC nanocomposite coatings from citrate bath. Journal of The Electrochemical Society, 165(11), D526-D535.
[29] Karahan, İ. H., & Özdemir, R. (2014). Effect of Cu concentration on the formation of Cu1− x Znx shape memory alloy thin films. Applied surface science, 318, 100-104.
[30] Özdemir, R., Karahan, İ. H., & Karabulut, O. (2016). A study on the electrodeposited Cu-Zn alloy thin films. Metallurgical and Materials Transactions A, 47(11), 5609-5617.
[31] Sanz, O., Echave, F. J., Romero-Sarria, F., Odriozola, J. A., & Montes, M. (2013). Advances in structured and microstructured catalytic reactors for hydrogen production. Renewable Hydrogen Technologies: Production, Purification, Storage, Applications and Safety,, 201-224.
[32] Slupska, M., & Ozga, P. (2014). Electrodeposition of Sn-Zn-Cu alloys from citrate solutions. Electrochimica Acta, 141, 149-160.
[33] Özdemir, R., & Karahan, İ. H. (2014). Electrodeposition and properties of Zn, Cu, and Cu1− x Znx thin films. Applied surface science, 318, 314-318.
[34] El-Giar, E. M., & Thomson, D. J. (1997, May). Localized electrochemical plating of interconnectors for microelectronics. In IEEE WESCANEX 97 Communications, Power and Computing. Conference Proceedings (pp. 327-332). IEEE.
[35] Seol, S. K., Yi, J. M., Jin, X., Kim, C. C., Je, J. H., Tsai, W. L., ... & Margaritondo, G. (2004). Coherent microradiology directly observes a critical cathode-anode distance effect in localized electrochemical deposition. electrochemical and solid-state letters, 7(9), C95-C97.
[36] Seol, S. K., Pyun, A. R., Hwu, Y., Margaritondo, G., & Je, J. H. (2005). Localized Electrochemical Deposition of Copper Monitored Using Real‐Time X‐ray Microradiography. Advanced Functional Materials, 15(6), 934-937.
[37] Seol, S. K., Kim, J. T., Je, J. H., Hwu, Y., & Margaritondo, G. (2007). Fabrication of freestanding metallic micro hollow tubes by template-free localized electrochemical deposition. Electrochemical and solid-state letters, 10(5), C44-C46.
[38] Lin, C. S., Lee, C. Y., Yang, J. H., & Huang, Y. S. (2005). Improved copper microcolumn fabricated by localized electrochemical deposition. electrochemical and solid-state letters, 8(9), C125-C129.
[39] Lee, C. Y., Lin, C. S., & Lin, B. R. (2008). Localized electrochemical deposition process improvement by using different anodes and deposition directions. Journal of Micromechanics and Microengineering, 18(10), 105008.
[40] Wang, F., Wang, F., & He, H. (2016). Parametric electrochemical deposition of controllable morphology of copper micro-columns. Journal of The Electrochemical Society, 163(10), E322-E327.
[41] Wang, F., Xiao, H., & He, H. (2016). Effects of applied potential and the initial gap between electrodes on localized electrochemical deposition of micrometer copper columns. Scientific reports, 6, 26270.
[42] Kamaraj, A. B., Shrestha, H., Speck, E., & Sundaram, M. (2017). Experimental study on the porosity of electrochemical nickel deposits. Procedia Manufacturing, 10, 478-485.
[43] Wang, F., Sun, J., Liu, D., Wang, Y., & Zhu, W. (2017). Effect of voltage and gap on micro-nickel-column growth patterns in localized electrochemical deposition. Journal of The Electrochemical Society, 164(6), D297-D301.
[44] Lin, J. C., Jang, S. B., Lee, D. L., Chen, C. C., Yeh, P. C., Chang, T. K., & Yang, J. H. (2005). Fabrication of micrometer Ni columns by continuous and intermittent microanode guided electroplating. Journal of Micromechanics and Microengineering, 15(12), 2405.
[45] Chang, T. K., Lin, J. C., Yang, J. H., Yeh, P. C., Lee, D. L., & Jiang, S. B. (2007). Surface and transverse morphology of micrometer nickel columns fabricated by localized electrochemical deposition. Journal of Micromechanics and Microengineering, 17(11), 2336.
[46] Yang, J. H., Lin, J. C., Chang, T. K., Lai, G. Y., & Jiang, S. B. (2008). Assessing the degree of localization in localized electrochemical deposition of copper. Journal of Micromechanics and Microengineering, 18(5), 055023.
[47] Lin, J. C., Chang, T. K., Yang, J. H., Jeng, J. H., Lee, D. L., & Jiang, S. B. (2008). Fabrication of a micrometer Ni–Cu alloy column coupled with a Cu micro-column for thermal measurement. Journal of Micromechanics and Microengineering, 19(1), 015030.
[48] Yang, J. H., Lin, J. C., Chang, T. K., You, X. B., & Jiang, S. B. (2009). Localized Ni deposition improved by saccharin sodium in the intermittent MAGE process. Journal of Micromechanics and Microengineering, 19(2), 025015.
[49] Lin, J. C., Yang, J. H., Chang, T. K., & Jiang, S. B. (2009). On the structure of micrometer copper features fabricated by intermittent micro-anode guided electroplating. Electrochimica Acta, 54(24), 5703-5708.
[50] Chen, T. C., Hwang, Y. R., Lin, J. C., & Ciou, Y. J. (2010). The Development of a Real-Time Image Guided Micro Electroplating System. Int. J. Electrochem. Sci, 5, 1810-1820.
[51] 張翔,(2018),銅鎳合金微結構之電鍍研究,國立中央大學。
[52] 劉謹綸,(2018),以微電鍍法製備三維銅錫介金屬化合物微結構,國立中央大學。
[53] 張瑞慶,(2006),奈米壓痕技術與應用,中華民國力學學會會訊,第114期。
[54] Bonou, L., Eyraud, M., Denoyel, R., & Massiani, Y. (2002). Influence of additives on Cu electrodeposition mechanisms in acid solution: direct current study supported by non-electrochemical measurements. Electrochimica acta, 47(26), 4139-4148.
[55] Qiao, F., & West, A. C. (2014). The impact of cations on nucleus density during copper electrodeposition. Electrochimica Acta, 150, 8-14.
[56] Ibrahim, M. A., & Bakdash, R. S. (2020). Copper-rich Cu–Zn alloy coatings prepared by electrodeposition from glutamate complex electrolyte: Morphology, structure, microhardness and electrochemical studies. Surfaces and Interfaces, 18, 100404. |