參考文獻 |
[1] J. F. Wilson, "Practice and theory of electrochemical machining", 1971.
[2] K. P. Rajurkar et al., "Micro and nano machining by electro-physical and chemical processes", CIRP annals, vol. 55, no. 2, pp. 643-666, 2006.
[3] R. Schuster, V. Kirchner, P. Allongue, and G. Ertl, "Electrochemical micromachining", Science, vol. 289, no. 5476, pp. 98-101, 2000.
[4] 朱樹敏,電化學加工技術,化學工業出版社,北京,2006。
[5] B. Bhattacharyya, J. Munda, and M. Malapati, "Advancement in electrochemical micro-machining", International Journal of Machine Tools and Manufacture, vol. 44, no. 15, pp. 1577-1589, 2004.
[6] J. Kozak, K. P. Rajurkar, and Y. Makkar, "Selected problems of micro-electrochemical machining", Journal of Materials Processing Technology, vol. 149, no. 1-3, pp. 426-431, 2004.
[7] S. H. Ahn, S. H. Ryu, D. K. Choi, and C. N. Chu, "Electro-chemical micro drilling using ultra short pulses", Precision Engineering, vol. 28, no. 2, pp. 129-134, 2004.
[8] M. Hewidy, S. Ebeid, K. P. Rajurkar, and M. El-Safti, "Electrochemical machining under orbital motion conditions", Journal of Materials Processing Technology, vol. 109, no. 3, pp. 339-346, 2001.
[9] S. Ebeid, M. Hewidy, T. El-Taweel, and A. Youssef, "Towards higher accuracy for ECM hybridized with low-frequency vibrations using the response surface methodology", Journal of Materials Processing Technology, vol. 149, no. 1-3, pp. 432-438, 2004.
[10] H. P. Tsui, J. C. Hung, J. C. You, and B. H. Yan, "Improvement of electrochemical microdrilling accuracy using helical tool", Materials and Manufacturing Processes, vol. 23, no. 5, pp. 499-505, 2008.
[11] Y. K. Yang, "A Study on Magnetic Field Assisted Micro Electro-Chemical Milling", National Central University, M.A. Thesis, 2009.
[12] M. S. Park and C. N. Chu, "Micro-electrochemical machining using multiple tool electrodes", Journal of Micromechanics and Microengineering, vol. 17, no. 8, p. 1451, 2007.
[13] M. Wang and D. Zhu, "Fabrication of multiple electrodes and their application for micro-holes array in ECM", The International Journal of Advanced Manufacturing Technology, vol. 41, no. 1-2, pp. 42-47, 2009.
[14] L. Cagnon et al., "Electrochemical micromachining of stainless steel by ultrashort voltage pulses", Zeitschrift für Physikalische Chemie, vol. 217, no. 4, pp. 299-314, 2003.
[15] B. Bhattacharyya and J. Munda, "Experimental investigation on the influence of electrochemical machining parameters on machining rate and accuracy in micromachining domain", International Journal of Machine Tools and Manufacture, vol. 43, no. 13, pp. 1301-1310, 2003.
[16] A. Ruszaj, M. Zybura, R. Żurek, and G. Skrabalak, "Some aspects of the electrochemical machining process supported by electrode ultrasonic vibrations optimization", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 217, no. 10, pp. 1365-1371, 2003.
[17] M. Sen and H. Shan, "A review of electrochemical macro-to micro-hole drilling processes", International journal of machine tools and manufacture, vol. 45, no. 2, pp. 137-152, 2005.
[18] X. Lu and Y. Leng, "Electrochemical micromachining of titanium surfaces for biomedical applications", Journal of Materials Processing Technology, vol. 169, no. 2, pp. 173-178, 2005.
[19] T. Kurita, K. Chikamori, S. Kubota, and M. Hattori, "A study of three-dimensional shape machining with an ECμM system", International Journal of Machine Tools and Manufacture, vol. 46, no. 12-13, pp. 1311-1318, 2006.
[20] B. Park, B. Kim, and C. Chu, "The effects of tool electrode size on characteristics of micro electrochemical machining", CIRP annals, vol. 55, no. 1, pp. 197-200, 2006.
[21] B. Bhattacharyya, M. Malapati, J. Munda, and A. Sarkar, "Influence of tool vibration on machining performance in electrochemical micro-machining of copper", International Journal of Machine Tools and Manufacture, vol. 47, no. 2, pp. 335-342, 2007.
[22] J. Munda, M. Malapati, and B. Bhattacharyya, "Control of micro-spark and stray-current effect during EMM process", Journal of Materials Processing Technology, vol. 194, no. 1-3, pp. 151-158, 2007.
[23] W. Natsu, T. Ikeda, and M. Kunieda, "Generating complicated surface with electrolyte jet machining", Precision Engineering, vol. 31, no. 1, pp. 33-39, 2007.
[24] L. Staemmler, K. Hofmann, and H. Kück, "Hybrid tooling by a combination of high speed cutting and electrochemical milling with ultrashort voltage pulses", Microsystem Technologies, vol. 14, no. 2, pp. 249-254, 2008.
[25] P. Pa, "Super finishing with ultrasonic and magnetic assistance in electrochemical micro-machining", Electrochimica Acta, vol. 54, no. 25, pp. 6022-6027, 2009.
[26] I. Yang, M. S. Park, and C. N. Chu, "Micro ECM with ultrasonic vibrations using a semi-cylindrical tool", International Journal of Precision Engineering and Manufacturing, vol. 10, no. 2, pp. 5-10, 2009.
[27] S. Ali, S. Hinduja, J. Atkinson, and M. Pandya, "Shaped tube electrochemical drilling of good quality holes", CIRP annals, vol. 58, no. 1, pp. 185-188, 2009.
[28] S. Skoczypiec, "Research on ultrasonically assisted electrochemical machining process", The International Journal of Advanced Manufacturing Technology, vol. 52, no. 5-8, pp. 565-574, 2011.
[29] W. Natsu, H. Nakayama, and Z. Yu, "Improvement of ECM characteristics by applying ultrasonic vibration", International Journal of Precision Engineering and Manufacturing, vol. 13, no. 7, pp. 1131-1136, 2012.
[30] J. Wang, W. Chen, F. Gao, and F. Han, "Ultrasonically assisted electrochemical micro drilling with sidewall-insulated electrode", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 230, no. 3, pp. 466-474, 2016.
[31] G. Skrabalak and A. Stwora, "Electrochemical, electrodischarge and electrochemical-discharge hole drilling and surface structuring using batch electrodes", Procedia Cirp, vol. 42, pp. 766-771, 2016.
[32] M. Wang, Y. Zhang, Z. He, and W. Peng, "Deep micro-hole fabrication in EMM on stainless steel using disk micro-tool assisted by ultrasonic vibration", Journal of Materials Processing Technology, vol. 229, pp. 475-483, 2016.
[33] K. Egashira, A. Hayashi, Y. Hirai, K. Yamaguchi, and M. Ota, "Drilling of microholes using electrochemical machining", Precision Engineering, vol. 54, pp. 338-343, 2018.
[34] C. Bradley and J. Samuel, "Controlled phase interactions between pulsed electric fields, ultrasonic motion, and magnetic fields in an anodic dissolution cell", Journal of Manufacturing Science and Engineering, vol. 140, no. 4, 2018.
[35] M. Baoji, P. Cheng, K. Yun, and P. Yin, "Effect of magnetic field on the electrochemical machining localization", The International Journal of Advanced Manufacturing Technology, vol. 102, no. 1-4, pp. 949-956, 2019.
[36] J. C. Kuo, "An Investigation of Ultrasonic-Assisted Micro Electrochemical Drilling of Nickel-Based Alloy", National Central University, M.A. Thesis, 2019.
[37] J. Arab, P. Adhale, D. K. Mishra, and P. Dixit, "Micro array hole formation in glass using electrochemical discharge machining", Procedia Manufacturing, vol. 34, pp. 349-354, 2019.
[38] B. Ghoshal and B. Bhattacharyya, "Influence of vibration on micro-tool fabrication by electrochemical machining", International Journal of Machine Tools and Manufacture, vol. 64, pp. 49-59, 2013.
[39] J. Thorpe and R. Zerkle, "A Theoretical Analysis of the Equilibrium Sinking of Shallow, Axially Symmetric Cavities by Electrochemical Machining", Fundamentals of Electrochemical Machining, Electrochemical Society, Princeton, pp. 1-39, 1971.
[40] 洪智育,「微電化學深孔加工之研究與分析」,國立中央大學,碩士論文,2006。
[41] Z. W. Fan, "The Analysis and Investigation on the Micro-electrode and Micro-hole Fabrication by Electrochemical Machining", National Central University, PhD Thesis, 2010.
[42] S. Y. Lin, "An Investigation of Magnetic Field Assisted Electrochemical Micro Drilling", National Central University, M.A. Thesis, 2011.
[43] W. M. Haynes, CRC handbook of chemistry and physics, CRC press, 2014. |