參考文獻 |
[1] M. Pérez, D. Carou, E. M. Rubio, R. Teti, Current advances in additive manufacturing, Proc. CIRP., 88 (2020) 439-444.
[2] Standard, A. S. T. M. ISO/ASTM 52900: 2015 Additive manufacturing-General principles-terminology, ASTM F2792-10e1, (2012).
[3] L. Chen, Y. He, Y. Yang, S. Niu, H. Ren, The research status and development trend of additive manufacturing technology, Int. J. Adv. Manuf. Technol., 89 (2017) 3651-3660.
[4] 鄭正元,江卓培,林宗翰,林榮信,蘇威年,汪家昌,蔡明忠,賴維祥,鄭逸琳與洪基彬,3D列印積層製造技術與應用,全華圖書股份有限公司,新北市,2017。
[5] C. Shuai, P. Feng, C. Gao, Y. Zhou, S. Peng, Simulation of dynamic temperature field during selective laser sintering of ceramic powder, Math Comp Model Dyn., 19 (2013) 1-11.
[6] B. K. Panda, S. Sahoo, Thermo-mechanical modeling and validation of stress field during laser powder bed fusion of AlSi10Mg built part, Results pyhs., 12 (2019) 1372-1381.
[7] W. H. Lee, Y. Zhang, J. Zhang, Discrete element modeling of powder flow and laser heating in direct metal laser sintering process, Powder Technol., 315 (2017) 300-308.
[8] A. Foroozmehr, M. Badrossamay, E. Foroozmehr, S. I. Golabi, Finite element simulation of selective laser melting process considering optical penetration depth of laser in powder bed, Mater design., 89 (2016) 255-263.
[9] E. J. Parteli, T. Pöschel, Particle-based simulation of powder application in additive manufacturing, Powder Technol., 288 (2016) 96-102.
[10] V. Manvatkar, A. De, T. DebRoy, Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process, Mater. Sci. Tech. Ser., 31 (2015) 924-930.
[11] V. D. Manvatkar, A. A. Gokhale, G. J. Reddy, A. Venkataramana, A. De, Estimation of melt pool dimensions, thermal cycle, and hardness distribution in the laser-engineered net shaping process of austenitic stainless steel, Metall. Mater. Trans. A., 42 (2011) 4080-4087.
[12] T. Mukherjee, H. L. Wei, A. De, T. DebRoy, Heat and fluid flow in additive manufacturing—Part I: Modeling of powder bed fusion, Comp. Mater. Sci., 150 (2018) 304-313.
[13] I. A. Roberts, C. J. Wang, R. Esterlein, M. Stanford, D. J. Mynors, A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing, Int. J. Mach. Tools Manuf., 49 (2009) 916-923.
[14] S. Kolossov, E. Boillat, R. Glardon, P. Fischer, M. Locher, 3D FE simulation for temperature evolution in the selective laser sintering process, Int. J. Mach. Tools Manuf., 44 (2004) 117-123.
[15] L. Dong, A. Makradi, S. Ahzi, Y. Remond, Finite element analysis of temperature and density distributions in selective laser sintering process, In Mater. Sci. Forum, 553 (2007) 75-80.
[16] L. Ma, H. Bin, Temperature and stress analysis and simulation in fractal scanning-based laser sintering, Int. J. Adv. Manuf. Technol., 34 (2007) 898-903.
[17] Y. Gao, J. Xing, J. Zhang, N. Luo, H. Zheng, Research on measurement method of selective laser sintering (SLS) transient temperature, Optik, 119 (2008) 618-623.
[18] L. Dong, A. Makradi, S. Ahzi, Y. Remond, Three-dimensional transient finite element analysis of the selective laser sintering process, J. Mater. Process. Technol., 209 (2009) 700-706.
[19] J. D. Williams, C. R. Deckard, Advances in modeling the effects of selected parameters on the SLS process, Rapid Prototyping J., (1998).
[20] J. Ren, J. Liu, J. Yin, Simulation of transient temperature field in the selective laser sintering process of W/Ni powder mixture, In International Conference on Computer and Computing Technologies in Agriculture, 494-503 (2010), Springer, Berlin, Heidelberg.
[21] Z. Jian, L. Deying, Z. Longzhi, Z. Mingjuan, Simulation of temperature field in selective laser sintering of copper powder, In 2010 International Conference on Mechanic Automation and Control Engineering, (2010) 3282-3285, IEEE.
[22] H. W. Ouyang, Z. M. Liu, Q. Wang S. C. Huang, “Materials Science and Engineering of Powder Metallurgy,”14 (2009) 218–224.
[23] J. Zhang, D. Li, J. Li, L Zhao, Numerical simulation of temperature field in selective laser sintering, In International Conference on Computer and Computing Technologies in Agriculture, (2010) 474-479, Springer, Berlin, Heidelberg.
[24] J. Zhang, D. Y. Li, B. Qiu, L. Z. Zhao, Simulation of temperature field in selective laser sintering on PA6/Cu composite powders, Adv. Mat. Res., 213 (2011) 519-523, Trans Tech Publications Ltd.
[25] J. Yin, H. Zhu, L. Ke, W. Lei, C. Dai, Zuo, D, Simulation of temperature distribution in single metallic powder layer for laser micro-sintering, Comput. Mater. Sci., 53 (2012) 333-339.
[26] J. Xing, W. Sun, R. S. Rana, S. M. IEEE, 3D modeling and testing of transient temperature in selective laser sintering (SLS) process, Optik, 124 (2013) 301-304.
[27] R. Ganeriwala, T. I. Zohdi, Multiphysics modeling and simulation of selective laser sintering manufacturing processes. Proc. Cirp., 14 (2014). 299-304.
[28] R. Ganeriwala, T. I. Zohdi, A coupled discrete element-finite difference model of selective laser sintering, Granul Matter, 18 (2016) 21.
[29] S. A. Khairallah, A. Anderson, Mesoscopic simulation model of selective laser melting of stainless steel powder, J. Mater. Process. Technol., 214 (2014) 2627-2636.
[30] D. Moser, S. Pannala, J. Murthy, Computation of effective thermal conductivity of powders for selective laser sintering simulations, Journal of Heat Transfer, 138 (2016).
[31] S. C. Cheng, R. I. Vachon, Thermal conductivity of packed beds and powder beds, Int. J. Heat Mass Transf., 12 (1969) 1201-1206.
[32] K. Bala, P. R. Pradhan, N. S. Saxena, M. P Saksena, Effective thermal conductivity of copper powders, J. Phys. D, 22 (1989) 1068.
[33] G. Widenfeld, Y. Weiss, H. Kalman, The effect of compression and preconsolidation on the effective thermal conductivity of particulate beds, Powder Technol., 133 (2003) 15-22.
[34] H. Xin, W. Sun, J. Fish, Discrete element simulations of powder-bed sintering-based additive manufacturing, Int. J. Mech. Sci., 149 (2018) 373-392.
[35] M. Sabelle, M. Walczak, J. Ramos-Grez, Scanning pattern angle effect on the resulting properties of selective laser sintered monolayers of Cu-Sn-Ni powder, Opt. Laser. Eng., 100 (2018) 1-8.
[36] M. Masoomi, S. M. Thompson, N. Shamsaei, A. Elwany, L. Bian, An experimental-numerical investigation of heat transfer during selective laser melting, In 26th International Solid Freeform Fabrication Symposium, (2015) 1-14.
[37] M. Badrossamay, T. H. C. Childs, Further studies in selective laser melting of stainless and tool steel powders, Int. J. Mach. Tools Manuf., 47 (2007) 779-784.
[38] J. Song, W. Wu, L. Zhang, B. He, L. Lu, X. Ni, Q. Long, G Zhu, Role of scanning strategy on residual stress distribution in Ti-6Al-4V alloy prepared by selective laser melting, Optik, 170 (2018) 342-352.
[39] W. Pei, W. Zhengying, C. Zhen, L. Junfeng, Z. Shuzhe, D. Jun, Numerical simulation and parametric analysis of selective laser melting process of AlSi10Mg powder, Appl. Physa—mater., 123 (2017) 540.
[40] M. Matsumoto, M. Shiomi, K. Osakada, F. Abe, Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing, Int. J. Mach. Tools Manuf., 42 (2002) 61-67.
[41] R. Li, Y. Shi, J. Liu, H. Yao, W. Zhang, Effects of processing parameters on the temperature field of selective laser melting metal powder, Powder. Metall. Met. C+., 48 (2009) 186-195.
[42] W. X. Zhang, Y. S. Shi, J. H. Liu, Z. L. Lu, G. Q. Chen, S. H. Huang, Type HRMP-ii machine for selective laser melting process, In 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping. Leiria, PORTUGAL (2007) 541-544.
[43] Y. Li, D. Gu, Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder, Mater Design., 63 (2014) 856-867.
[44] Y. Huang, L. J. Yang, X. Z. Du, and Y. P. Yang, Finite element analysis of thermal behavior of metal powder during selective laser melting, Int. J. Therm. Sci., 104 (2016) 146-157.
[45] P. Fischer, M. Locher, V. Romano, H. P. Weber, S. Kolossov, R. Glardon, Temperature measurements during selective laser sintering of titanium powder, Int. J. Mach. Tools Manuf., 44 (2004) 1293-1296.
[46] H. Hu, X. Ding, L. Wang, Numerical analysis of heat transfer during multi-layer selective laser melting of AlSi10Mg, Optik, 127 (2016) 8883-8891.
[47] L.Wang, X. Jiang, Y. Zhu, X. Zhu, J. Sun, B. Yan, An approach to predict the residual stress and distortion during the selective laser melting of AlSi10Mg parts, Int. J. Adv. Manuf. Technol., 97 (2018) 3535-3546.
[48] A. Olleak, Z. Xi, Finite element modeling of the selective laser melting process for Ti-6Al-4V, Solid freeform fabrication 2018: Proceedings of the 29th Annual International, (2018) 1710-1720.
[49] J. J. S. Dilip, S. Zhang, C. Teng, K. Zeng, C. Robinson, D. Pal, B. Stucker, Influence of processing parameters on the evolution of melt pool, porosity, and microstructures in Ti-6Al-4V alloy parts fabricated by selective laser melting, Progress in Additive Manufacturing, 2 (2017) 157-167.
[50] D. Pal, N. Patil, K. H. Kutty, K. Zeng, A. Moreland, A. Hicks, D. Beeler, B. Stucker, A generalized feed-forward dynamic adaptive mesh refinement and derefinement finite-element framework for metal laser sintering—part II: nonlinear thermal simulations and validations, J. Manuf. Sci. E., 138 (2016).
[51] T. H. C. Childs, M. Berzins, G. R. Ryder, A. Tontowi, Selective laser sintering of an amorphous polymer—simulations and experiments, Proc. Inst. Mech. Eng. B. J. Eng. Manuf., 213 (1999). 333-349.
[52] S. M. Tawfik, M. N. Nasr, H. A. El Gamal, Finite element modelling for part distortion calculation in selective laser melting, Alexandria Engineering Journal, 58 (2019) 67-74.
[53] H. Liu, Numerical analysis of thermal stress and deformation in multi-layer laser metal deposition process, Missouri University of Science and Technology, (2014).
[54] Y. Du, X. You, F. Qiao, L. Guo, Z. Liu, A model for predicting the temperature field during selective laser melting, Results Phys., 12 (2019) 52-60.
[55] M. J. Ansari, D. S. Nguyen, H. S. Park, Investigation of SLM Process in Terms of Temperature Distribution and Melting Pool Size: Modeling and Experimental Approaches, Materials, 12 (2019) 1272.
[56] I. Yadroitsev, P. Krakhmalev, I. Yadroitsava, Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolution, J. Alloy. Compd, 583 (2014) 404-409.
[57] 林沐禾, 掉落體衝擊顆粒床之力學與運動行為的研究 : DEM的實驗驗證及內部性質探討, 國立中央大學, 碩士論文, (2016)。
[58] P. A. Cundall, O. D. Strack, A discrete numerical model for granular assemblies, Grotechnique, 29 (1979) 47-65.
[59] H.S. Carslaw, J.C. Jaeger, Conduction of Heat in Solids, 2th Ed. London: Oxford Press, (1959).
[60] F. P. Incropera, A. S. Lavine, T. L. Bergman, D. P DeWitt, Principles of heat and mass transfer Wiley, (2013).
[61] C. Bonacina, G. Comini, A. Fasano, M. 1 Primicerio, Numerical solution of phase-change problems, Int. J. Heat Mass Transf., 16 (1973) 1825-1832.
[62] M. Muhieddine, E. Canot, R. March, Various approaches for solving problems in heat conduction with phase change, (2009).
[63] K. C. Mills, Recommended values of thermophysical properties for selected commercial alloys, Woodhead Publishing, (2002).
[64] C. Thornton, C. W. Randall, Applications of theoretical contact mechanics to solid particle system simulation, In Studies in Applied Mechanics, 20 (1988) 133-142. Elsevier.
[65] C. O′Sullivan, J. D. Bray, Selecting a suitable time step for discrete element simulations that use the central difference time integration scheme, Eng. Computation., (2004).
[66] J. Crank, The mathematics of diffusion, Oxford university press, (1979).
[67] E. Zhelezina, I. S. Jones, A. B. Movchan, Singular perturbation analysis of dynamic fields in a thermoelastic solid with a small surface-breaking crack, Acta. Mech. Sinica., 22 (2006) 449-454. |