參考文獻 |
[1] Agiwal, M., Roy, A., and Saxena, N. : ‘Next generation 5G wireless networks: a comprehensive survey’, IEEE Commun. Surv. Tutor., 2016, 18, (3), pp. 1617–1655
[2] Wang, C.W., Ma, T.G., and Yang, C.F.: ‘A new planar artificial transmission line and its applications to a miniaturized Butler matrix’, IEEE Trans. Microw. Theory Tech., 2007, 55, (12), pp. 2792–2801
[3] A. Koelpin, G. Vinci, B. Laemmle, D. Kissinger, and R. Weigel, “The six-port in modern society”, IEEE Microw. Mag., vol. 11, no. 7, pp. 35-43, Dec. 2010.
[4] 李駿華, "無頻寬減損之微小化功率分配器與巴特勒矩陣," 碩士論文 國立中央大學, June 2011.
[5] 方偉廷, "基於橋式T線圈之微型化切換式波束成型模組," 博士論文 國立中央大學, June 2017.
[6] W. Choi, K. Park, Y. Kim, K. Kim and Y. Kwon, "A V-Band switched beam-forming antenna module using absorptive switch integrated with 4×4 Butler matrix in 0.13-μm CMOS," in IEEE Transactions on Microwave Theory and Techniques, vol. 58, no. 12, pp. 4052-4059, Dec. 2010
[7] W. Fang, E. Chang and Y. Lin, "Bridged-T coil for miniature dual-band branch-line coupler and power divider designs," in IEEE Transactions on Microwave Theory and Techniques, vol. 66, no. 2, pp. 889-901, Feb. 2018
[8] A. M. Martir, I. M. Fernandez, and A. O. Monux, “Wideband slotcoupled Butler matrix,” IEEE Microw. Wireless Compon. Lett., vol. 24, no. 12, pp. 848–850, Dec. 2014.
[9] S. Trinh-Van, J. M. Lee, Y. Yang, K. Lee and K. C. Hwang, "A sidelobe-reduced, four-beam array antenna fed by a modified 4×4 Butler matrix for 5G applications," in IEEE Transactions on Antennas and Propagation, vol. 67, no. 7, pp. 4528-4536, July 2019
[10] G. Tian, J. Yang and W. Wu, "A novel compact Butler matrix without phase shifter," in IEEE Microwave and Wireless Components Letters, vol. 24, no. 5, pp. 306-308, May 2014
[11] H. N. Chu and T. Ma, "An extended 4×4 Butler matrix with enhanced beam controllability and widened spatial coverage," in IEEE Transactions on Microwave Theory and Techniques, vol. 66, no. 3, pp. 1301-1311, March 2018
[12] C. Lee, M. K. Khattak and S. Kahng, "Wideband 5G beamforming printed array clutched by LTE-A 4 × 4-multiple-input–multiple-output antennas with high isolation," in IET Microwaves, Antennas & Propagation, vol. 12, no. 8, pp. 1407-1413
[13] E. T. Der, T. R. Jones and M. Daneshmand, "Miniaturized 4 × 4 Butler matrix and tunable phase shifter using ridged half-mode substrate integrated waveguide," in IEEE Transactions on Microwave Theory and Techniques, vol. 68, no. 8, pp. 3379-3388, Aug. 2020
[14] Y. Lin and J. Lee, "Miniature Butler matrix design using glass-based thin-film integrated passive device technology for 2.5-GHz applications," in IEEE Transactions on Microwave Theory and Techniques, vol. 61, no. 7, pp. 2594-2602, July 2013
[15] Fei Wang and Hua Wang, "A broadband compact low-loss 4×4 Butler matrix in CMOS with stacked transformer based quadrature couplers," 2016 IEEE MTT-S International Microwave Symposium (IMS), San Francisco, CA, 2016, pp. 1-4
[16] X. Tao, R. Cao, Z. Li, D. Rong, L. Jiang and L. Sun, "Design of X-band 4×4 on-chip Butler matrix based on 0.18µm SiGe BiCMOS process," 2019 IEEE 19th International Conference on Communication Technology (ICCT), Xi′an, China, 2019, pp. 805-809
[17] C. Chang, T. Chin, J. Wu and S. Chang, "Novel design of a 2.5-GHz fully integrated CMOS Butler matrix for smart-antenna systems," in IEEE Transactions on Microwave Theory and Techniques, vol. 56, no. 8, pp. 1757-1763, Aug. 2008
[18] B. Suh and B. Min, "A 28-GHz reconfigurable SP4T switch network for a switched beam system in 65-nm CMOS," in IEEE Transactions on Microwave Theory and Techniques, vol. 68, no. 6, pp. 2057-2064, June 2020
[19] C. Chen, W. Fang and Y. Lin, "Miniature 2.4-GHz switched beamformer module in IPD and its application to very-low-profile 1D and 2D scanning antenna arrays," 2017 IEEE 67th Electronic Components and Technology Conference (ECTC), Orlando, FL, 2017, pp. 273-284
[20] T. Chin, S. Chang, J. Wu and C. Chang, "A 25-GHz compact low-power phased-array receiver with continuous beam steering in CMOS technology," in IEEE Journal of Solid-State Circuits, vol. 45, no. 11, pp. 2273-2282, Nov. 2010
[21] M. Elkhouly, Y. Mao, C. Meliani, J. C. Scheytt, and F. Ellinger, "A G-band four-element Butler matrix in 0.13 µm SiGe BiCMOS technology," IEEE J. Solid-State Circuits, vol. 49, no. 9, pp. 1916-1926, Sept. 2014.
[22] H.V.Nguyen and C.Caloz, “Dual-band CRLH six-port front-end in MIM technology”, Proceedings of the 36th European Microwave Conference, September 2006, pp.122-124
[23] E. E. Djoumessi, S. O. Tatu, R. G. Bosisio, M. Chaker, and K. Wu, “Varactor-tuned multi-band six-port front-end for wireless applications,” in Proc. Asia-Pacific Microwave Conf., Dec. 16–20, 2008, pp. 1–5.
[24] Serioja O. Tatu, and Tayeb A. Denidni, “Analysis of a new multiband multiport circuit for phase detection applications”, IEEE Microwave and Wireless Components Lett. Vol. 15, pp. 389-391. June 2005
[25] 黃冠淳, "寬頻微型化六埠網路接收機," 碩士論文 國立中央大學, June 2017.
[26] Balanis, Constantine A., “Antenna theory analysis and design”, John Wiley & Sons, 3rd Edition, USA (2005)
[27] Qualcomm Technologies, Inc., Global update on spectrum for 4G & 5G, Sep. 2020. Accessed on: Oct. 20, 2020. [Online].Available: https://www.qualcomm.com/media/documents/files/spectrum-for-4g-and-5g.pdf
[28] G. Vinci, A. Koelpin, and R. Weigel, “Employing six-port technology for phase-measurement-based calibration of automotive radar,” in Microwave Conference, 2009. APMC 2009. Asia Pacific, Singapore, dec. 2009, pp. 329 –332. |