參考文獻 |
[ASTM1] ASTM B928/B928M-09 Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments.
[ASTM2] ASTM G66, “Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET TEST ) ’’ , ASTM International , West Conshohocken , PA(1999)
[ASTM3] ASTM G67-04 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid(NAMLT Test)
[ASTM4] ASTM B918/B918M-17a, Standard Practice for Heat Treatment of Wrought Aluminum Alloy, (2017)
[ASTM5] ASTM E8/E8M-16a, Standard Test Methods for Tension Testing of Metallic Materials, (2016)
[BEN] L. A. Bendersky, A. J. McAlister , and F. S. Biancaniello , “Phase Transformation during Annealing of Rapidly Solidified Al-Rich Al-Fe-Si Alloys’’ , Metallurgical Transactions A, Vol.19, No.12, pp.2893-2900(1988)
[BOV] F. S. Bovard, “Corrosion in marine and saltwater environments II, in D.A. Shifler, T. Tsuru , P. M. Natishan, S. Ito (Eds.)” , Electrochemical Society Proceedings, Vol. 2004-14, pp. 232-243.(2005)
[CAR] M.C. Carroll, P.I. Gouma, M.J. Mills, G.S. Daehn , B.R. Dunbar, “Effects of Zn additions on the grain boundary precipitation and corrosion of Al 5083” , Scripta mater ,Vol. 42, pp.335-340. (2002)
[CLA] L. M. Clarebrough, M. E. Hargreaves, G. W. WestSource, “ The Release of Energy during Annealing of Deformed Metals” Mathematical and Physical Sciences, Vol. 232, pp. 252-270(1955)
[DAV] J. R. Davis and Associates, “ASM Specialty Handbook: Aluminum and Aluminum Alloys” , ASM International Materials Park, Ohio, p.43.(1994)
[DAV2] J. R. Davis and Associates, “ASM Specialty Handbook: Aluminum and Aluminum Alloys” , ASM International Materials Park, Ohio, p. 31.(1994)
[DAV3] J . R . Davis, Aluminum and Aluminum Alloys, ASM International, Metals Park, Ohio, p.33.(1993)
[DAV4] J. R.Davis and Associates, “ASM Specialty Handbook: Aluminum and Aluminum Alloys”, ASM International Materials Park, Ohio, pp. 580-585.(1994)
[DAV5]V. G. Davydov, T.D. Rostova, “Scientific principles of making an alloying addition of scandium to aluminium alloys”, Materials Science and Engineering A, vol.280, pp. 30-36.(2000)
[DEC]B.F. Decker, D. Harker, ”Recrystallization in rolled copper” AIME, Vol 188 pp.887-890 (1950)
[GOU] S. Gourdet, F. Montheillet, “An experimental study of the recrystallization mechanism during hot deformation of aluminium”, Materials Science and Engineering: A, Vol. 283, PP.274-288 (2000)
[GOR]P. Gordon “Microcalorimetric Investigation of Recrystallization of Copper” Journal of Metals, pp.1043-1052(1955)
[GAR] M.A. Garcia-Bernal , R.S. Mishra , R. Verma , D. Hernandez-Silva, “Hot deformation behavior of friction-stir processed strip-cast 5083 aluminum alloys with different Mn contents” , Materials Science and Engineering A, Vol.534, pp.186-192.(2012)
[HAT] J. E. Hatch, “Aluminum: Properties and Physical Metallurgy”, ASM International Metals Park, Ohio.(1984)
[HUM]F. J. Humphreys and M. Hatherly, “ Recrystallization and Related Annealing Phenomena,” Elsevier Oxford, pp2-3(2004)
[JIA] JianfengYan, Nathan M. Heckman, LeonardoVelasco & Andrea M. Hodge, Improve sensitization and corrosion resistance of an Al-Mg alloy by optimization of grain boundaries, Scientific Reports
[JIN] Jingyu Jiang, Feng Jiang, Menghan Zhang, Zhongqin Tang, Mengmeng Tong, “Recrystallization behavior of Al-Mg-Mn-Sc-Zr alloy based on two different deformation ways”, Materials Letter, Vol. 265, 127455 (2020)
[KAS] K. T. Kashyap, T. Chandrashekar, “Effects and mechanisms of grain refinement in aluminum alloys” , Bulletin of Materials Science, Vol.24 pp.345-353.(2001)
[KEN]R. Kent, V. Horn, “Aluminum: Properties and Physical Metallurgy and Phase diagrams” , ASM International Metals Park, Ohio, p.203.(1971)
[LEE] S. L. Lee, S. T. Wu, “Identification of Dispersoids in Al-Mg Alloys Containing Mn” , Metallurgical Transactions A , Vol.18A pp.1353-1357.(1987)
[LEE2] photomicrograph courtesy and Modification by S.L. Lee, National Central Univ., Taiwan(2016)
[LEE3]Shih-Wei Lee, Jien-Wei Yeh, “ Superplasticity of 5083 alloys with Zr and Mn additions produced by reciprocating extrusion” , Materials Science and Engineering A,Vol. 460–461, pp.409-419. (2007)
[LIM] M.L.C. Lim , J.R. Scully , and R.G. Kelly, “Intergranular Corrosion Penetration in an Al-Mg Alloy as a Function of Electrochemical and Metallurgical Conditions” , CORROSION SCIENCE , Vol.69, pp.35-47,(2013)
[MAS] T.B. Massalski , J.L. Murray, L.H. Bennett, and H. Baker, “ Binary Alloy Phase Diagrams ”, ASM International, Ohio, p.130.(1990).
[MIL]Miljana Popovic, Endre Romhanji, “Characterization of microstructural changes in an Al-6.8 wt.% Mg alloy by electrical resistivity measurements ” , Materials Science and Engineering A, Vol.492, pp460-467(2008)
[NOR]A. F. Norman, P. B. Prangnell and R. S. Mcewen, “ The solidification behaviour of dilute aluminium-scandium alloys” , Acta mater, Vol. 46, pp. 5715-5732.(1998)
[OGU] I. N. A. Oguocha, O. J. Adigun, S. Yannacopoulos, “Effect of Sensitization Heat Treatment on Properties of Al-Mg Alloy AA5083-H116”, J Mater Sci ,Vol. 43, pp. 4208-4214(2008)
[PAR] J. K. Park, A. J. Ardell, “Microstructures of the Commercial 7075 Al Alloys in the T651 and T7 Tempers”, Metallurgical Transaction A, Vol.14A, pp.1957-1965.(1983) [SEA] J. L. Searles, P. I. Gouma , R.G. Buchheit , “Stress Corrosion Cracking of Sensitized AA5083(Al-4.5Mg-1.0Mn),”Metallurgical and Materials Transactions A, Vol. 32, pp.2859-2867(2001)
[SHO] Shouxun Ji , Wenchao Yang, Feng Gao, Douglas Watson, Zhongyun Fan, Effect of iron on the microstructure and mechanical property of Al–Mg–Si–Mn and Al–Mg–Si diecast alloys, Materials Science & Engineering A, Vol.564,pp130-139(2013)
[SRI] Srinivasan Nagarajan , N. P. Gurao , Venkitanarayanan Parameswaran, “On the kinetics of texture development in Al-Mg alloy under high strain rate tension”, Materials Characterization, Vol.163, 110303(2020)
[TAN] L. Tan and T. R. Allen, “Effect of thermomechanical treatment on the corrosion of AA5083” , Corrosion Science, Vol.52, pp.548-554, 2010.
[UNO] K.A. Unocic, P. Kobe, M.J. Mills, G.S. Daehn, “Grain Boundary Precipitate Modification for Improved Intergranular Corrosion Resistance” , Materials Science Forum ,Vol.519, pp.327-332. (2006)
[VAS] A.K. Vasudevan and R.D. Doherty , “ Aluminum alloys contemporary research and applications” , Academic Press ,Boston , p.84.(1989)
[VLA] M. Vlach, I. Stulikova , B. Smola , N. Zaludova , “Characterization of phase development in non-isothermally annealed mold-cast and heat-treated Al–Mn–Sc–Zr alloys ” ,Materials Characterization ,Vol. 61, 72 pp.1400-1405. (2010)
[ZHI]Zhimin Yin , Qinglin Pan, Yonghong Zhang, Feng Jiang, Effect of minor Sc and Zr on the microstructure and mechanical properties of Al–Mg based alloys, Materials Science and Engineering A280 ,pp151–155(2000)
[ZHO] Zhongqin Tang, Feng Jiang, Mengjun Long, Jingyu Jiang, Huifang Liu, Mengmeng Tong, ” Effect of annealing temperature on microstructure, mechanical properties and corrosion behavior of Al-Mg-Mn-Sc-Zr alloy ”, Applied Surface Science, Vol. 514, 146081(2020). |