參考文獻 |
1.[ASM1] J.R. Davis, ASM Specialty Handbook: Stainless Steels, ASM International Materials Park, P.13 (1994)
2.[ASM2] J. R. Davis, ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International Materials Park, P.3 (1994)
3.[ASM3] J. R. Davis, ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International Materials Park, P.4 (1994)
4.[ASM4] J. R. Davis, ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International Materials Park, P.3 (1994)
5.[ASM5] J. R. Davis, ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International Materials Park, P.4 (1994)
6.[ASM6] J. R. Davis, ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International Materials Park, P.5 (1994)
7.[ASM7] J. R. Davis, ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International Materials Park, P.20 (1994)
8.[ASM8] J. R. Davis, ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International Materials Park, P.718 (1994)
9.[ASTM1] ASTM-B917: Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes, ASTM International (2023)
10.[ASTM2] ASTM-B962: Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle, ASTM International (2023)
11.[ASTM3] ASTM-E92-17: Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials, ASTM International (2023)
12.[ASTM4] ASTM-E9-19: Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature, ASTM International (2023)
13.[AVI] M.G. Avila, M. Portanova, A. Rabiei, Ballistic performance of composite metal foams, Compos. Struct., Vol.125, PP. 202-211 (2015)
14.[BAI] Song Bai, Puyou Ying, Zhiyi Liu, Jian Wang, Junlin Li, Quantitative transmission electron microscopy and atom probe tomography study of Ag-dependent precipitation of Ω phase in Al-Cu-Mg alloys, Mater. Sci. Eng. A, Vol.687, PP.8-16 (2017)
15.[BAN] J. Banhart, F. García-Moreno, K. Heim, H. W. Seeliger, Light-weighting in transportation and defence using aluminium foam sandwich structures, Light Weighting for Defense, Aerospace, and Transportation, Springer, P.61 (2019)
16.[BAR] R.M. Barrer, Synthesis of a zeolitic mineral with chabazite-like sorptive properties, J. Chem. SOC., PP. 127-132 (1948)
17.[BOL] C. Bolat, İ. C. Akgün, A. Göksenli, On the way to real applications: aluminum matrix syntactic foams, European Mechanical Science, Vol.4, PP. 131-141 (2020)
18.[CAM] Francesca Campana, Daniela Pilone, Effect of heat treatments on the mechanical behaviour of aluminium alloy foams, Scr. Mater., Vol.60, PP. 679-682, (2009)
19.[CHA] Chih-Horng Chang, Sheng-Long Lee, Jing-Chie Lin and Rong-Ruey Jeng, The Effect of Silver Content on the Precipitation of the Al-4.6Cu-0.3Mg Alloy, Mater. Trans., Vol.46, PP. 236-240 (2005)
20.[CHA1] Chih-Horng Chang, Sheng-Long Lee, Jing-Chie Lin, Ming-Shan Yeh, Rong-Ruey Jeng, Effect of Ag content and heat treatment on the stress corrosion cracking of Al–4.6Cu–0.3Mg alloy, Mater. Chem. Phys., Vol.91, PP.454-462 (2005)
21.[CHA2] Chih-Horng Chang, Sheng-Long Lee, Tiz-Yu Hsu, and Jing-Chie Lin, Impact of Cu/Mg Ratio on Thermal Stability of Hot Extrusion of Al-4.6Cu-Mg-Ag Alloys, Metall. Mater. Trans. A, Vol.38, PP. 2832–2842 (2007)
22.[CHE] Chester R J, Polmear I J., TEM investigation of precipitates in Al-Cu-Mg-Ag and Al-Cu-Mg alloys, Micron, Vol.11, PP.311-312 (1980)
23.[CHEN1] 陳信文, 李正德, 徐立銘, 周更生, 呂世源, 製備多孔金屬的方法, Patent pending (2000)
24.[CHEN2] Mien-Chung Chen, Tsai-Fu Chung, Cheng-Ling Tai, Yu-Hsuan Chen, Jer-Ren Yang, Sheng-Long Lee, Chien-Nan Hsiao, Cheng-Si Tsao, Che-Min Chou, Quantitative evaluation of the effect of Ag-addition on the concurrently-existing precipitation kinetics in the aged Al-Cu-Mg(-Ag) alloys, Mater. Des., Vol.227, 111766 (2023)
25.[CHUNG] Tsai-Fu Chung, Yo-Lun Yang, Chien-Nan Hsiao, Wei-Chih Li, Bo-Ming Huang, Cheng-Si Tsao, Zhusheng Shi, Jianguo Lin, Paul E. Fischione, Takahito Ohmura, Jer-Ren Yang, Morphological evolution of GP zones and nanometer-sized precipitates in the AA2050 aluminium alloy, Int. j. lightweight mater. manuf., Vol.1, PP. 142-156 (2018)
26.[COL] A.J. Coleman, K. Murray, M. Kearns, T.A. Tingskog, B. Sanford, E. Gonzalez, et al., Processing and properties of MIM AISI 4605 via master alloy routes, Metal Powder Industries Federation, PP. 4-35 (2012)
27.[COX] James Cox, Dung D. Luong, Vasanth Chakravarthy Shunmugasamy, Nikhil Gupta, Oliver M. Strbik III, Kyu Cho, Dynamic and Thermal Properties of Aluminum alloya356/Silicon Carbide Hollow Particle Syntactic Foams, Metals, Vol.4, PP. 530-548 (2014)
28.[DAV] N.J. Davidson: Review of the Mechanical Properties, Reliability and Usage of Ultra High Strength Aluminum Casting Alloys 201.0 and 206.0, AFS, PP. 232-247 (1988)
29.[ELL] Elliott, J. C., U.S. Patent, 2751289 (1956)
30.[GAV] M. Gavgali, B. Aksakal, Effects of various homogenisation treatments on the hot workability of ingot aluminium alloy AA2014, Mater. Sci. Eng. A, Vol.254, PP.189–199 (1998)
31.[GIB] L. J. Gibson, M. F. Ashby, Cellular Solids : Structure and Properties, Cambridge: Cambridge University Press (1997)
32.[GON] Gonzalo Alejandro, Rocha Rivero, Benjamin Franklin Schultz, J.B. Ferguson, Compressive properties of Al-A206/sic and Mg-AZ91/sic Syntactic foams, J. Mater. Res., Vol.28, PP. 2426-2435 (2013)
33.[IBR] A. Ibrahim, C. Körner, R. F. Singer, The effect of TiH2 particle size on the morphology of al-foam produced by pm process, Adv. Eng. Mater., Vol.10, PP. 845-848 (2018)
34.[JIN] L. Jing, X. Su, F. Yang, et al, Compressive strain rate dependence and constitutive modeling of closed-cell aluminum foams with various relative densities. J. Mater. Sci., Vol.53, PP. 14739–14757 (2018)
35.[KAN] Sung Jin Kang , Jian-Min Zuo , Heung Nam Han , Miyoung Kim, Ab initio study of growth mechanism of omega precipitates in Al-Cu-Mg-Ag alloy and similar systems, J. Alloys Compd., Vol.737, PP. 207-212 (2018)
36.[KEN] A.R Kennedy, The effect of TiH2 heat treatment on gas release and foaming in Al–TiH2 preforms, Scr. Mater., Vol. 47, PP. 763-767 (2002)
37.[KIS] M. Kiser, M.Y. He, F.W. Zok, The mechanical response of ceramic microballoon reinforced aluminum matrix composites under compressive loading, Acta Mater., Vol.47, PP. 2685-2694 (1999)
38.[KNO] K. M. Knowles, W. M. Stobbs, The Structure of {111} Age- Hardening Precipitates in Al-Cu-Mg-Ag Alloys, Acta Cryst., Vol.44, PP. 207-227 (1988)
39.[KOR] Kornél Májlinger, Imre Norbert Orbulov, Characteristic compressive properties of hybrid metal matrix syntactic foams, Mater. Sci. Eng. A, Vol.606, PP. 248-256 (2014)
40.[KOV] L. Kovarik, S.A. Court, H.L. Fraser, M.J. Mills, GPB zones and composite GPB/GPBII zones in Al–Cu–Mg alloys, Acta Mater., Vol.56, PP. 4804-4815 (2008)
41.[KRE] Grilec Kresimir, Marić Gojko, Jakovljević Suzana, A study on energy absorption of aluminium foam. BHM Bergund Hüttenmännische Monatshefte. Vol.155, PP. 231-234 (2010)
42.[LEE] Lee DH, Nam SW., Role of Mn-dispersoid in the fracture toughness enhancement of A1–Zn–Mg–(Mn) alloys, Vol.1, Met. Mater., PP. 171–176 (1995)
43.[LEE1] 李勝隆, 金屬熱處理:原理與應用, 全華, P.9-34 (2018)
44.[LEE2] 李勝隆, 金屬熱處理:原理與應用, 全華, P.9-41 (2018)
45.[LEE3] 李勝隆, 金屬熱處理:原理與應用, 全華, P.9-52 (2018)
46.[LI] Q. M. Li, I. Magkiriadis and J. J. Harrigan, Compressive Strain at the Onset of Densification of Cellular Solids, J. Cell. Plast., Vol.42, PP. 371-392 (2016) [LIU1] Y. Liu, F. Teng, F.H. Cao, Z.X. Yin, Y. Jiang, S.B. Wang, P.K. Shen, Defective GP-zones and their evolution in an Al-Cu-Mg alloy during high-temperature aging, J. Alloys Compd., Vol.774, PP.988-996 (2019)
47.[LIU1] Hongwei Liu, Yongan Zhang, Jianbo Zhang , Baohong Zhu, Feng Wang , Zhihui Li , Xiwu Li , Baiqing Xiong, DSC and TEM study of Al-Cu-Mg-Ag alloy ageing at low and elevated temperature, Adv. Mater. Res., Vol.295, PP. 1225-1229 (2011)
48.[LIU2] Xiao Yan Liu, Qing Lin Pan, Cong Ge Lu, Yun Bin Hea,Wen Bin Li ,Wen Jie Liang, Microstructure and mechanical properties of Al–Cu–Mg–Mn–Zr alloy with trace amounts of Ag, Mater. Sci. Eng. A, Vol.639, PP. 128-132 (2009)
49.[MA] L. Q. Ma and Z. L. Song, Cellular structure control of aluminum foams during foaming process of aluminum melt, Scr. Mater., Vol. 39, PP. 1523-1528 (1998)
50.[MAR] Jacob Marx, Afsaneh Rabiei, Overview of composite metal foams and their properties and performance, Adv. Eng. Mater., Vol.19, 1600776 (2017)
51.[MAR2] J.A. Santa Maria, B.F. Schultz, J.B. Ferguson, P.K. Rohatgi, Al–Al2O3 syntactic foams – Part I: Effect of matrix strength and hollow sphere size on the quasi-static properties of Al-A206/Al2O3 syntactic foams, Mater. Sci. Eng. A, Vol.582, PP. 415-422 (2013)
52.[MARX] J. Marx, M. Portanova, A. Rabiei, Ballistic performance of composite metal foam against large caliber threats, Compos. Struct., Vol.225, 111032 (2019)
53.[MAZ] F.M.Mazzolani, Aluminum Structural Design, Springer, P.16 (2003)
54.[MCB] J.W. Mcbain, The Sorption of Gases and Vapors by Solids, Rutledge and Sons, P.8 (1932)
55.[MPIF] MPIF-Standard-50, Preparing and Evaluating Metal Injection Molded (MIM) Sintered/Heat Treated Tension Test Specimens, Metal Powder Industries Federation (2023)
56.[MUD] B.C Buddle, The precipitate Ω phase in Al-Cu-Mg-Ag alloys, Acta Mater., Vol.37, PP. 777-789 (1989)
57.[MUK] T. Mukai, H. Kanahashi, T. Miyoshi, M. Mabuchi1, T.G. Nieh and K. Higashi, Experimental study of energy absorption in a Close-celled aluminum foam under dynamic loading, Scr. Mater., Vol.40, PP. 921–927 (1999)
58.[MUKH] A. K. Mukhopadhyay, Nucleation of Ω Phase in an Al-Cu-Mg Alloy Containing Small Additions of Ag, Mater. Trans., Vol.38, PP.478-482 (1997)
59.[NAG] S. Nagata, K. Kanaiwa and T. Ichikawa, Method for the preparation of a spongy metallic body, U.S. Patent, 4556096 (1985)
60.[NIN] Ningzhen Wang, Xiang Chen, Yanxiang Li, Yuan Liu, Huawei Zhang and Xiong Wang, Preparation and Compressive Performance of an A356 Matrix Syntactic Foam, Mater. Trans., Vol.59, PP.699-705 (2018)
61.[NOR] Norbert O., I., Szlancsik, A., Kemény, A., Kincses, D., Compressive mechanical properties of low-cost aluminium matrix syntactic foams, Compos. Part A, 105923 (2020)
62.[PUG] H. Puga, V.H. Carneiro, C. Jesus, J. Pereira, V. Lopes, Influence of particle diameter in mechanical performance of Al expanded clay syntactic foams, Compos. Struct., Vol.184, PP. 698-703 (2018)
63.[RAB1] A. Rabiei, A.T. O’Neill, A study on processing of a composite metal foam via casting, Mater. Sci. Eng. A, Vol.404, PP. 159-164 (2005)
64.[RIV] Rocha Rivero, G., Schultz, B., Ferguson, J., Gupta, N., Rohatgi, P., Compressive properties of Al-A206/SiC and Mg-AZ91/SiC syntactic foams, J. Mater. Res., Vol.28, PP. 2426-2435 (2013)
65.[REI] L.Reich, M.Murayama, K.Hono, Evolution of Ω phase in an Al–Cu–Mg–Ag alloy a three-dimensional atom probe study, Acta Mater., Vol.46, PP. 6053-6062 (1998)
66.[VEN1] Lakshmi J. Vendra, Afsaneh Rabiei, A study on aluminum–steel composite metal foam processed by casting, Mater. Sci. Eng. A, Vol.465, PP. 59-67 (2007)
67.[VEN2] L.J. Vendra, J.A. Brown, A. Rabiei, Effect of processing parameters on the microstructure and mechanical properties of Al–steel composite foam. J Mater Sci 46, 4574–4581 (2011)
68.[VER] B. Verlinden, P. Wouters, E. Aernoudt ,L. Delaey, S.Cauwenberg, Effect of Different Homogenization Treatments on the Hot Workability of Aluminium Alloy AA2024, Mater. Sci. Eng. A, Vol.123, PP.229-237 (1990)
69.[SHU] G.J. Shu, K.S. Hwang, Y.T. Pan, Improvements in sintered density and dimensional stability of powder injection-molded 316L compacts by adjusting the alloying compositions, Acta Mater., Vol.54, PP. 1335-1342 (2006)
70.[SIN] S. Singh, N. Bhatnagar, A survey of fabrication and application of metallic foams (1925–2017), J. Porous Mater., Vol.25, PP. 537–554 (2018)
71.[SOL] R. Soltani, Z. Sarajan, M. Soltani, Foaming of pure aluminium by TiH2, Mater. Res. Innov., Vol.18, PP. 401-406 (2014)
72.[SOS] Sosnik A., U.S. Patent, 2434775 (1948)
73.[TAN1] Wan Tan, Yuan Liu, Canxu Zhou, Xiang Chen, Yanxiang Li , Fabrication, properties, and applications of open-cell aluminum foams: A review, J. Mater. Sci. Technol., Vol.62, PP.11-24 (2021)
74.[TAN2] Wan Tan. et al. Fabrication and compressive behavior of open-cell aluminum foams via infiltration casting using spherical CaCl2 space-holders. China Foundry, Vol.19, PP. 89–98 (2022)
75.[TANG] E. Tang, X. Zhang, Y. Han, Experimental research on damage characteristics of CFRP/aluminum foam sandwich structure subjected to high velocity impact, J. Mater. Res. Technol., Vol.8, PP. 4620-4630 (2019)
76.[WAN] Ningzhen Wang, Xiang Chen, Yanxiang Li, Yuan Liu, Huawei Zhang and Xiong Wang, Preparation and Compressive Performance of an A356 Matrix Syntactic Foam, Mater. Trans., Vol.59, PP.699-705 (2018)
77.[WANG] Chunhe Wang, Chunhuan Guo, Ruonan Qin, Fengchun Jiang, Fabrication and characterization of layered structure reinforced composite metal foam, J. Alloys Compd., Vol.895,162658 (2022)
78.[WANG1] Ningzhen Wang, Eric Maire, Xiang Chen, Jérôme Adrien, Yanxiang Li, et al., Compressive performance and deformation mechanism of the dynamic gas injection aluminum foams. Mater. Charact., Vol.147, PP. 11-20 (2019)
79.[WANG2] Ningzhen Wang, Xiang Chen, Yanxiang Li, Yuan Liu, Huawei Zhang, Xiong Wang, Preparation and Compressive Performance of an A356 Matrix Syntactic Foam, Mater. Trans., Vol.59, PP. 699-705 (2018)
80.[XIA] Xingchuan Xia, Xiaowei Chen, Zan Zhang, Xu Chen, Weimin Zhao, Bo Liao, Boyoung Hur, Compressive properties of closed-cell aluminum foams with different contents of ceramic microspheres, Mater. Des., Vol.56, PP. 353-358 (2014)
|