參考文獻 |
參考文獻
[1] P. Waide and C. U. Brunner, Energy-Efficiency Policy Opportunities for Electric Motor-Drive Systems. Paris, France: International Energy Agency, 2011.
[2] G. K. Esen and E. Özdemir, “A new field test method for determining energy efficiency of induction motor,” IEEE Trans. Instrum. Meas., vol. 66, no. 12, pp. 3170-3179, Dec. 2017.
[3] A. T. D. Almeida, “Electric motors and variable speed drives efficiency – Adjusting MEPS to technology developments,” Motor Summit Zurich, 11/12, Oct. 2016.
[4] Rotating Electrical Machines—Part 30-1: Efficiency Classes of Line perated AC Motors (IE code) Machines, no. Edition 1.0, document IEC 60034-30-1, Int. Electrotech. Commission, 2014.
[5] M. Doppelbauer, “Update on IEC motor and converter standards,” 6th Int. Motor Summit for Energy Efficiency powered by Impact Energy, Oct. 2016.
[6] 黃雅琪,「永磁與磁阻馬達市場發展機會與挑戰」,機械工業雜誌,415期,2017年10月號。
[7] H. A. Zarchi, J. Soltani, and G. A. Markadeh, “Adaptive input-output feedback linearization-based torque control of synchronous reluctance motor without mechanical sensor,” IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 375–384, Jan. 2010.
[8] L. Ortombina, F. Tinazzi, and M. Zigliotto, “Magnetic modelling of synchronous reluctance and internal permanent magnet motors using radial basis function networks”, IEEE Trans. Ind. Electron., vol. 65, no. 2, pp. 1140-1148, Feb. 2018.
[9] A. Yousefi-Talouki, P. Pescetto, and G. Pellegrino, “Sensorless direct flux vector control of synchronous reluctance motors including standstill, MTPA, and flux weakening,” IEEE Trans. Ind. Appl., vol. 53, no. 4, pp. 3598–3608, Jul./Aug. 2017.
[10] A. Yousefi-Talouki, P. Pescetto, G. Pellegrino, and I. Boldea, “Combined active flux and high-frequency injection methods for sensorless direct-flux vector control of synchronous reluctance machines,” IEEE Trans. Power Electron., vol. 33, no. 3, pp. 2447–2457, Mar. 2018.
[11] N. Bianchi, S. Bolognani, E. Carraro, M. Castiello, and E. Fornasiero, “Electric vehicle traction based on synchronous reluctance motors,” IEEE Trans. Ind. Appl., vol. 52, no. 6, pp. 4762–4769, Nov./ Dec. 2016.
[12] O. Payza, Y. Demir, and M. Aydin, “Investigation of losses for a concentrated winding high-speed permanent magnet-assisted synchronous reluctance motor for washing machine application,” IEEE Trans. Magn., vol. 54, no. 11, Nov. 2018.
[13] P. Niazi, “Permanent magnet assisted synchronous reluctance motor design and performance improvement,” Ph.D. dissertation, Texas A&M Univ., College Station, TX, 2005.
[14] H. C. Liu and J. Lee, “Optimum design of an IE4 line-start synchronous reluctance motor considering manufacturing process loss effect,” IEEE Trans. Ind. Electron., vol. 65, no. 4, pp. 3104–3114, Apr. 2018.
[15] F. Oliveira and A. Ukil, “Comparative performance analysis of induction & synchronous reluctance motors in chiller systems for energy efficient buildings”, IEEE Trans. Ind. Informat., vol. 15, no. 8, pp. 4384–4393, Aug. 2019.
[16] J. Baek, S. S. R. Bonthu, and S. Choi, “Design of five-phase permanent magnet assisted synchronous reluctance motor for low output torque ripple applications,” IET Electr. Power Appl., vol. 10, no. 5, pp. 347–355, 2016.
[17] X. Zhang and G. H. B. Foo, ‘‘Overmodulation of constant-switching frequency-based DTC for reluctance synchronous motors incorporating field-weakening operation,’’ IEEE Trans. Ind. Electron., vol. 66, no. 1, pp. 37–47, Jan. 2019.
[18] M. N. Ibrahim, P. Sergeant, and E. M. Rashad, “Combined star-delta windings to improve synchronous reluctance motor performance,” IEEE Trans. Energy Convers., vol. 31, no. 4, pp. 1479–1487, Dec. 2016.
[19] R. Morales-Caporal and M. Pacas, “A predictive torque control for the synchronous reluctance machine taking into account the magnetic cross saturation,” IEEE Trans. Ind. Electron., vol. 54, no. 2, pp. 1161–1167, Apr. 2007.
[20] E. Daryabeigi, H. A. Zarchi, G. R. A. Markadeh, J. Soltani, and F. Blaabjerg, “Online MTPA control approach for synchronous reluctance motor drives based on emotional controller,” IEEE Trans. Power Electron., vol. 30, no. 4, pp. 2157–2166, Apr. 2015.
[21] A. Vagati, M. Pastorelli, G. Franceschini, and S. C. Petrache, “Design of low-torque-ripple synchronous reluctance motors,” IEEE Trans. Ind. Appl., vol. 34, no. 4, pp. 758–765, Jul./Aug. 1998.
[22] C. Oprea, A. Dziechciarz, and C. Martis, “Comparative analysis of different synchronous reluctance motor topologies,” in Proc. 2015 IEEE 15th Int. Conf. Environment and Electrical Engineering (EEEIC), Rome, Italy, 2015, pp. 1904–1909.
[23] J. Kolehainen, “Synchronous reluctance motor with form blocked rotor,” IEEE Trans. Energy Convers., vol. 25, no. 2, pp. 450–456, Jun. 2010.
[24] S. Cai, J. Shen, H. Hao, and M. Jin, “Design methods of transversally laminated synchronous reluctance machines,” CES Trans. Electrical Machines and Systems, vol. 1, no. 2, pp. 164–173, Jul. 2017.
[25] “ABB SynRM motor & drive package – Super premium efficiency for HVAC application,” 8th edition of the European hpc infrastructure workshop, Mar. 2017
[26] S. Taghavi and P. Pillay, “A sizing methodology of the synchronous reluctance motor for traction applications,” IEEE J. Emerg. Sel. Topics Power Electron., vol. 2, no. 2, pp. 329–340, Jun. 2014.
[27] M. N. Ibrahim, H. Rezk, M. Al-Dhaifallah, and P. Sergeant, ‘‘Solar array fed synchronous reluctance motor driven water pump: An improved performance under partial shading conditions,’’ IEEE Access, vol. 7, pp. 77100–77115, 2019.
[28] A. Yousefi-Talouki, P. Pescetto, and G. Pellegrino, “Sensorless direct flux vector control of synchronous reluctance motors including standstill, MTPA, and flux weakening,” IEEE Trans. Ind. Appl., vol. 53, no. 4, pp. 3598–3608, Jul./Aug. 2017.
[29] Y. Okamoto, R. Hoshino, S. Wakao, and T. Tsuburaya, “Improvement of torque characteristics for a synchronous reluctance motor using MMA-based topology optimization method,” IEEE Trans. Magn., vol. 54, no. 3, Mar. 2018.
[30] N. Bedetti, S. Calligaro, and R. Petrella, “Stand-still self-sdentification of flux characteristics for synchronous reluctance machines using novel saturation approximating function and multiple linear regression,” IEEE Trans. Ind. Appl., vol. 52, no. 4, pp. 3083–3092, Jul./Aug. 2016.
[31] H. C. Liu and J. Lee, “Optimum design of an IE4 line-start synchronous reluctance motor considering manufacturing process loss effect,” IEEE Trans. Ind. Electron., vol. 65, no. 4, pp. 3104–3114, Apr. 2018.
[32] F. Oliveira and A. Ukil, “Comparative performance analysis of induction & synchronous reluctance motors in chiller systems for energy efficient buildings”, IEEE Trans. Ind. Informat., vol. 15, no. 8, pp. 4384–4393, Aug. 2019.
[33] M. N. Ibrahim, H. Rezk, M. Al-Dhaifallah, and P. Sergeant, ‘‘Hybrid photovoltaic-thermoelectric generator powered synchronous reluctance motor for pumping applications,’’ IEEE Access, vol. 7, pp. 146979–146988, 2019.
[34] F. J. Lin, M. S. Huang, S. G. Chen, and C. W. Hsu, “Intelligent maximum torque per ampere tracking control of synchronous reluctance motor using recurrent Legendre fuzzy neural network,” IEEE Trans. Power Electron., vol. 34, no. 12, pp. 12080–12094, Dec. 2019.
[35] A. Vagati, M. Pastorelli, G. Franceschini, and S. C. Petrache, “Design of low-torque-ripple synchronous reluctance motors,” IEEE Trans. Ind. Appl., vol. 34, no. 4, pp. 758–765, Jul./Aug. 1998.
[36] S. Bolognani, L. Peretti, and M. Zigliotto, “Online MTPA control strategy for DTC synchronous-reluctance-motor drives,” IEEE Trans. Power Electron., vol. 26, no. 1, pp. 20–28, Jan. 2011.
[37] E. Daryabeigi, H. A. Zarchi, G. R. A. Markadeh, J. Soltani, and F. Blaabjerg, “Online MTPA control approach for synchronous reluctance motor drives based on emotional controller,” IEEE Trans. Power Electron., vol. 30, no. 4, pp. 2157–2166, Apr. 2015.
[38] S. K. Tseng, T. H. Liu, J. W. Hsu, L. R. Ramelan, and E. Firmansyah, “Implementation of online maximum efficiency tracking control for a dualmotor drive system,” IET Elect. Power Appl., vol. 9, no. 7, pp. 449–458, 2015.
[39] T. H. Liu, Y. Chen, S. K. Tseng, and M. J. Wu, “Implementation of maximum efficiency control for matrix-converter-based interior permanent magnet synchronous motor drive systems,” IET J. Eng., vol. 2018, no. 5, pp. 296–303, 2018.
[40] H. Pairo and A. Shoulaie, “Operating region and maximum attainable speed of energy-efficient control methods of interior permanent-magnet synchronous motors,” IET Power Electron., vol. 10, no. 5, pp. 555–567, Apr. 2017.
[41] J. Hu and B. Wu, “New integration algorithms for estimating motor flux over a wide speed range,” IEEE Trans. Power Eletron., vol. 13, no. 5, pp. 969-977, Sep. 1998
[42] R. R. Moghaddam, F. Magnussen, and C. Sadarangani, “Theoretical and experimental reevaluation of synchronous reluctance machine,” IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 6–13, Jan. 2010.
[43] F. Fernandez-Bernal, A. Garcia-Cerrada, and R. Faure, “Efficient control of reluctance synchronous machines,” in Proc. 24th Annu. Conf. IEEE IECON, vol. 2, pp. 923–928, Aug. 31–Sep. 4, 1998.
[44] S. Piriienko et al., “Influence of the control strategy on the efficiency of synrm based small-scale wind generators,” 2019 IEEE International Conference on Industrial Technology (ICIT), Melbourne, Australia, 2019, pp. 280-285.
[45] S. S. Maroufian and P. Pillay, “Design and analysis of a novel PM-assisted synchronous reluctance machine topology with AlNiCo magnets,” IEEE Trans. Ind. Appl., vol. 55, no. 5, pp. 4733-4742, Sep./Oct. 2019.
[46] S. Stipetic, D. Zarko, and N. Cavar, “Adjustment of rated current and power factor in a synchronous reluctance motor optimally designed for maximum saliency ratio,” IEEE Trans. Ind. Appl., vol. 56, no. 3, pp. 2481-2490, May/Jun. 2020.
[47] M. N. F. Ibrahim, A. S. Abdel-Khalik, E. M. Rashad, and P. Sergeant, “An improved torque density synchronous reluctance machine with a combined star–delta winding layout,” IEEE Trans. Energy Convers., vol. 33, no. 3, pp. 1015-1024, Sep. 2018.
[48] D. M. Sahoo and S. Chakraverty, “Functional link neural network learning for response prediction of tall shear buildings with respect to earthquake data,” IEEE Trans. Syst., Man, Cybern., Syst., vol. 48, no. 1, pp. 1–10, Jan. 2018.
[49] B. Y. Vyas, B. Das, and R. P. Maheshwari, “Improved fault classification in series compensated transmission line: Comparative evaluation of chebyshev neural network training algorithms,” IEEE Trans. Neural Netw. Learn. Syst., vol. 27, no. 8, pp. 1631–1642, Aug. 2016.
[50] L. Jin, Z. Huang, Y. Li, Z. Sun, H. Li, and J. Zhang, ‘‘On modified multioutput Chebyshev-polynomial feed-forward neural network for pattern classification of wine regions,’’ IEEE Access, vol. 7, pp. 1973–1980, 2019.
[51] S. Hou, J. Fei, C. Chen, and Y. Chu, “Finite-time adaptive fuzzy-neural network control of active power filter,” IEEE Trans. Power Electron., vol. 34, no. 10, pp. 10298–10313, Oct. 2019.
[52] F. J. Lin, M. S. Huang, S. G. Chen, C. W. Hsu, and C. H. Liang “Adaptive backstepping control for synchronous reluctance motor based on intelligent current angle control,” IEEE Trans. Power Electron., vol. 35, no. 7, pp. 7465–7479, Jul. 2020.
[53] H. Zhao, S. Gao, Z. He, X. Zeng, W. Jin, and T. Li, “Identification of Nonlinear Dynamic System Using a Novel Recurrent Wavelet Neural Network Based on the Pipelined Architecture,” IEEE Trans. Ind. Electron., vol. 61, no. 8, pp. 4171–4182, Aug. 2014.
[54] M. Pratama, J. Lu, E. Lughofer, G. Q. Zhang, and M. J. Er, “An incremental learning of concept drifts using evolving type-2 recurrent fuzzy neural networks,” IEEE Trans. Fuzzy Syst., vol. 25, no. 5, pp. 1175–1192, Oct. 2017.
[55] C. H. Chen, C. J. Lin, and C. T. Lin, “A functional-link-based neuro-fuzzy network for nonlinear system control,” IEEE Trans. Fuzzy Syst., vol. 16, no. 5, pp. 1362–1378, Oct. 2008.
[56] A. Rubio-Solis and G. Panoutsos, “Interval type-2 radial basis function neural network: A modeling framework,” IEEE Trans. Fuzzy Syst., vol. 23, no. 2, pp. 457–473, Apr. 2015.
[57] 吳長恩,“具寬速度控制範圍之同步磁阻馬達驅動器研製”,碩士論文,國立台北科技大學電機工程系,民國一百零五年。
[58] JFE, Electrical Steel Sheets, JFE Steel Corpotation.
[59] A. Kenny, A. Palazzolo, G. T. Montague, and A. F. Kascak, “Theory and Test Correlation for Laminate Stacking Factor Effect on Homopolar Bearing Stiffness.” ASME, Engineering for Gas Turbines and Power, vol. 126, no. 1, pp. 142-146, Jan. 2004.
[60] 鄒應嶼,“DSP數位控制簡介”,技術報告 TR–024,國立交通大學電機與控制工程系所,2000。
[61] 陳世剛,“利用函數連結放射狀基底函數網路於適應性步階迴歸控制六相永磁同步馬達定位驅動系統”,碩士論文,國立中央大學電機系,民國一百零五年。
[62] TMS320F2807x Piccolo Microcontrollers Datasheet, Texas Instruments.
[63] 黃泰寅,“新型每安培最大轉矩控制同步磁阻馬達驅動系統之開發”,碩士論文,國立中央大學電機系,民國一百零六年。
[64] 許哲瑋,“同步磁阻馬達驅動系統之智慧型每安培最大轉矩追蹤控制”,碩士論文,國立中央大學電機系,民國一百零八年。
[65] Bimal K. Bose,“Modern Power Electronics and AC Drives”Oct. 2001.
[66] P. Pillay, R. G. Haarley, and E. J. Odendal, “A comparison between star and delta connected induction motors when supplied by current source inverters,” Electric Power Systems Research., vol. 8, no. 1, pp. 41–51, Oct. 1984.
[67] Z. Haisen, L. Xiaofang, H. Jia, and L. Yingli, “The influence of wye and delta connection on induction motor losses taking slot opening and skew effect into account,” Proc. IEEE International Electric Machines and Drives Conference, May 2009.
[68] M. Y. Wei and T. H. Liu, “Design and implementation of an online tuning adaptive controller for synchronous reluctance motor drives,” IEEE Trans. Ind. Electron., vol. 60, no. 9, pp. 3644– 3657, Sep. 2013.
[69] E. Daryabeigi, A. Mirzaei, H. A. Zarchi, and S. Vaez-Zadeh, “Deviation model-based control of synchronous reluctance motor drives with reduced parameter dependency,” IEEE Trans. Power Electron., vol. 34, no. 7, pp. 6697–6705, Jul. 2019.
[70] R. Thike and P. Pillay, “Automated current control method for flux-linkage measurement of synchronous reluctance machines,” IEEE Trans. Ind. Appl., vol. 56, no. 2, pp. 1464-1474, Mar./Apr. 2020.
[71] S. Yamamoto, H. Hirahara, J. B. Adawey, T. Ara, and K. Matsuse, “Maximum efficiency drives of synchronous reluctance motors by a novel loss minimization controller with inductance estimator,” IEEE Trans. Ind. Appl.,, vol. 49, no. 6, pp. 2543-2551, Nov./Dec. 2013.
[72] M. F. Rahman, M. E. Haque, L. Tang, and L. Zhong, “Problems associated with the direct torque control of an interior permanent-magnet synchronous motor drive and their remedies,” IEEE Trans. Ind. Electron., vol. 51, no. 4, pp. 799–809, Aug. 2004.
[73] M. . P. Kazmierkowski, R. Krishnan, and F. Blaabjerg, Control in Power Electronics-Selected Problems. New York: Academic, 2002.
[74] S. Y. Chen and M. H. Song, “Energy-saving dynamic bias current control of active magnetic bearing positioning system using adaptive differential evolution,” IEEE Trans. Syst., Man, Cybern., Syst., vol. 49, no. 5, pp. 942–953, May 2019.
[75] F. J. Lin, M. S. Huang, P. Y. Yeh, H. C. Tsai, and C. H. Kuan, “DSP-based probabilistic fuzzy neural network control for Li-ion battery charger,” IEEE Trans. Power Electron., vol. 27, no. 8, pp. 3782–3794, Aug. 2012.
[76] G. H. B. Foo and M. F. Rahman, “Direct torque control of an IPM-synchronous motor drive at very low speed using a sliding-mode stator flux observer,” IEEE Trans. Power Electron, vol. 25, no. 4, pp. 933-942, Apr. 2010.
[77] P. Zhang, P. A. Cassani and S. S. Williamson, “An accurate inductance profile measurement technique for switched reluctance machines,” IEEE Trans. Ind. Electron., vol. 57, no. 9, pp. 2972-2979, Sep. 2010.
[78] M. N. Ibrahim, P. Sergeant, and E. M. Rashad, “Relevance of including saturation and position dependence in the inductances for accurate dynamic modeling and control of SynRMs,” IEEE Trans. Ind. Appl., vol. 53, no. 1, pp. 151–160, Jan./Feb. 2017.
[79] A. S. O. Ogunjuyigbe, A. A. Jimoh, D. V. Nicolae, and E. S. Obe, “Analysis of synchronous reluctance machine with magnetically coupled three-phase windings and reactive power compensation,” IET Electr. Power Appl., vol. 4, no. 4, pp. 291–303, Apr. 2009.
[80] M. Ferrari, N. Bianchi, and E. Fornasiero, “Analysis of rotor saturation in synchronous reluctance and PM-assisted reluctance motors,” IEEE Trans. Ind. Appl., vol. 51, no. 1, pp. 169–177, Jan. 2015.
[81] A. Balamurali, G. Feng, C. Lai, J. Tjong, and N. C. Kar, “Maximum efficiency control of PMSM drives considering system losses using gradient descent algorithm based on DC power measurement,” IEEE Trans. on Energy Conver., vol. 33, no. 4, pp. 2240–2249, Dec. 2018.
[82] Z. Yu, W. Kong, D. Li, R. Qu, and C. Gan, “Power factor analysis and maximum power factor control strategy for six-phase dc-biased vernier reluctance machines,” IEEE Trans. Ind. Appl., vol. 55, no. 5, pp. 4643-4652, Sep./Oct. 2019.
[83] “IEEE recommended practice for electric power distribution for industrial plants,” IEEE Std 141-1993, pp.1-768, 29 Apr. 1994. |