以柱狀透鏡陣列產生高對比度光型之光學設計

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：12

、訪客IP：3.14.83.223

姓名

劉杰勳(Jie-Xun Liu) 查詢紙本館藏

畢業系所

光電科學與工程學系

論文名稱

以柱狀透鏡陣列產生高對比度光型之光學設計
(Optical Design for High-contrast Light Patterns with use of Cylindrical Lens Array)

相關論文

★ 反射杯式與透鏡式 LED 車前燈之研究	★ 具光子回收之雷射多工雙光源照明模組之研究
★ 影像式輝度量測儀之特性量測與校正	★ 接觸式影像感測模組之導光棒設計
★ 使用RGB-D掃描點雲進行室內3D幾何重建之自動模型之研究	★ 數位光學相位共軛用於立體影像顯示之研究
★ 歐規LED車頭燈反射杯製作材料表現之分析	★ 超高對比度之歐規LED車頭燈之設計與驗證
★ 取像還原真實色彩演算之研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 (2025-8-1以後開放)

摘要(中)

在本論文中，我們基於孫慶成教授所領導之固態照明實驗室之光學設計與其相關技術，設計一款搭配一維柱狀透鏡陣列結構之車前燈近遠燈設計，以通過德國自行車近遠燈法規(StVZO 22A TA23,K-mark) 及聯合國歐洲經濟委員會(the United Nations Economic Commission for Europe, UNECE)制定的Regulation No. 113 Revision 3 Class B機車近遠燈法規作為設計目標。
此款車前燈設計有別於一般市面常見之車前燈設計，我們將能量盡量集中在光形上緣及法規區域，並設計成光形上緣有數個次強點且類似於上寬下窄之形狀，再利用一維柱狀透鏡陣列結構將光形水平延展，透過能量的疊加塑造出具有高對比度且可同時應對複數個法規要求之光形。

摘要(英)

This thesis study is based on the optical design and packaging technology of the solid-state lighting laboratory led by Professor C. C. Sun. We aim to design a white LED headlamp with a cylindrical lens array to meet Germany′s regulation of StVZO 22A TA23 (so-called K-mark) and Regulation No. 113 Revision 3 Class B (by the United Nations Economic Commission for Europe, UNECE).
The headlamp design is different from the general headlamp designs in the market. We try to concentrate the energy on the upper area of the projected light pattern on the regulation plane. The upper area of the light pattern is wider than the other area. Then the cylindrical lens array structure is used to extend the light pattern along the horizontal direction. The superposition of energy creates a high-contrast light pattern and meets multiple regulatory requirements.

關鍵字(中)

★ 反射杯
★ 一維柱狀透鏡陣列

關鍵字(英)

★ Reflector
★ cylindrical lens array

論文目次

摘要 i
Abstract ii
致謝 iii
圖目錄 iv
第一章緒論 1
1-1 研究背景 1
1-2 車頭燈介紹 3
第二章基礎原理 8
2-1幾何光學 9
2-2 光度學 10
2-3中場擬合法 16
第三章車前燈照明規範 19
3-1德國 StVZO 22A No. 23法規介紹 19
3-2歐洲 ECE R113 法規介紹 22
第四章搭配一維柱狀透鏡陣列之光學設計 27
4-1 LED 光源特性分析與探討 27
4-2 單位透鏡之分析 30
4-3 一維柱狀透鏡陣列分析 35
4-4一維柱狀透鏡陣列應用於車前燈之光學設計 40
第五章一維柱狀透鏡陣列搭配車前燈通過StVZO及UNECE Class B之檢測及驗證 50
5-1一維柱狀透鏡陣列搭配車前燈StVZO及UNECE Class B檢測 50
5-1-1 K-mark法規檢測 53
5-1-2 UNECE No.113 Class B規範檢測 59
5-1-3路面照明檢測 67
5-2一維柱狀透鏡陣列搭配車前燈StVZO及UNECE Class B驗證 72
5-2-1 LED車前燈法規驗證 73
5-2-2 K-mark法規驗證 77
5-2-3 UNECE No.113 Class B規範驗證 82
5-2-4路面照明驗證 87
第六章結論 94
參考文獻 98
中英文名詞對照表 102

參考文獻

1. Havfit website, https://havfit.com/fitness/b8df059c2021.
2. 黃聖筑，騎自行車對於健身的5項好處，Heho健康，2022。
3. UK Chief Medical Officer website, https://www.nhs.uk/live-well/exercise-health-benefits/.
4. 陳仕洲，移動性污染源排放廢氣中戴奧辛/呋喃之特徵，國立成功大學環境工程所博士論文，中華民國九十七年。
5. 陳宜佳，汽車排放空氣污染物控制對策減量評估研究，國立成功大學環境工程所碩士論文，中華民國八十九年。
6. Precedence Research website,https://www.precedenceresearch.com/e-bike-market.
7. 蔡承啟，疫情掀騎單車潮！零組件廠Shimano業績旺，Money DJ新聞，2021。
8. 陳宗慶，運動及自行車產業疫後逆勢看揚，工商時報，2021。
9. 曾麗芳，疫情推升需求，自行車業豐收，工商時報，2022。
10. 楊雅民，訂單滿手，自行車業看好旺到明年，自由財經，2022。
11. Eletreck website,https://electrek.co/2022/02/08/us-electric-bicycle-sales-tracking-towards-1-million-annually-global-market-heading-to-40b-with-a-b/.
12. Thenewslens website, https://www.thenewslens.com/article/.
13. Bureau of Foreign Trade, MOEA website, https://www.trade.gov.tw/.
14. 7Wheelsworkshop website, https://7wheelsworkshop.com/products/magicshine-rn400-%E5%96%AE%E8%BB%8A%E9%A0%AD%E7%87%88.
15. V. I. Oliker and O. von Tempski, “On the design of reflectors with prespecified distribution of virtual sources and intensities,” Inverse problems 14, 661–678 (1998). https://doi.org/10.1177/095440700021400802
16. P. Benítez, R. Mohedano, and J. C. Miñano, “Design in 3D geometry with the simultaneous multiple sur-face design method of nonimaging optics”, Proc. SPIE 3781 (1999). https://doi.org/10.1117/12.368248
17. W. Yan and W. Mao, “A multi reflector headlamp that can produce a diagonal cut off without a shield,”Proc. Inst. Mech. Eng. 214 ,839 842 (2000). https://doi.org/10.1177/095440700021400802
18. J. H. Park and J. Y. Sah, “Design of Reflector Optics with Smooth Surface for Automotive Lamps,” SAE Tech. Pap.2001 01 0457 (2001).
19. P. Benítez and J.C. Miñano, “Simultaneous multiple surface optical design method in three dimensions,” Opt. Eng. 43, 1489–1502 (2004).
20. H. J. Park, D. K. Lee, J. M. Lee, K. W. Park, J. Y. Joo, and J. S. Kwak, “Design of LED Bicycle Headlamp with a Horizontally Wide Viewing Angle,” Curr. Opt. Photonics 1, 351-357 (2017).
21. C. C. Sun, Y. C. Lo, C. C. Tsai, X. H. Lee, and W. T. Chien, “Anti-glare LED projection lamp based on an optical design with a confocal double-reflector,” Opt. Commun. 285, 4207-4210 (2012).
22. C. C. Sun, C. S. Wu, C. Y. Hsieh, Y. H. Lee, S. K. Lin, T. X. Lee, T. H. Yang, and Y. W. Yu, “Single reflector design for integrated low/high beam meeting multiple regulations with light field management,” Opt. Express 29, 18865-18875 (2021). https://doi.org/10.1364/OE.425866
23. M. Weber, C. Stover, L. Gilbert, T. Nevitt, and A. Ouderkirk, “Giant Birefringent Optics in Multilayer Polymer Mirrors,” Science 287 , 2451 2455 (2000). https://doi.org/10.1126/science.287.5462.2451
24. M. S. Tsai, C. C. Sun, T. H. Yang, C. S. Wu, S. K. Lin, and X. H. Le e, “Robust optical design for high contrast cut off line in vehicle forward lighting,” OSA Continuum 2 , 1080 1088 (2019). https://doi.org/10.1364/OSAC.2.001080.
25. H. Li, and S. Xie, “Measurement method of the refractive index of biotissue by total internal reflection,” Appl. Opt. 35, 1793-1795 (1996).
26. C. C. Sun, C. Y. Chen, H. Y. He, C. C. Chen, W. T. Chien, T. X. Lee, and T. H. Yang, “Precise optical modeling for silicate-based white LEDs,” Opt. Express 16, 20060-20066 (2008).
27. H. Wang, X. Wang, Y. Li, and P. Ge, “Design of a newly projected light emitting diode low beam h eadlamp based on microlenses,” Appl. Opt. 54 , 1794 1801 (2015). https://doi.org/10.1364/AO.54.001794
28. 陳觀宇，高光效多功能LED遠距離投射燈之研究，國立中央大學光電所碩士論文，中華民國一百零七年。
29. C. C. Sun, T. X. Lee, S. H. Ma, Y. L. Lee, and S. M. Huang, “Precise optical modeling for LED lighting verified by cross correlation in the midfield region,” Opt. Lett. 31, 2193-2195 (2006).
30. W. T. Chien, C. C. Sun, and I. Moreno, “Precise optical model of multi-chip white LEDs,” Opt. Express 15, 7572–7577 (2007).
31. C. C. Sun, W. T. Chien, I. Moreno, C. C. Hsieh, and Y. C. Lo, “Analysis of the far-field region of LEDs,” Opt. Express 17, 13918-13927 (2009).
32. 孫慶成，光電工程概論，全華圖書股份有限公司，中華民國一百零一年。
33. E. Hecht, Optics, 4th eds. (Addison Wesley, San Francisco, 2002).
34. V. N. Mahajan, Optical Imaging and Aberrations: Part I Ray Geometrical Optics (SPIE PRESS, Washington, 1998).
35. CIE 1988 2° spectral luminous efficiency functions of photopic vision, CIE Publication No.015 Colorimetry 4th Edition (CIE , 2018).
36. 大田登，色彩工程學：理論與應用，全華圖書股份有限公司，中華民國九十七年。
37. C. C. Sun, T. X. Lee, Optical Design for LED Solid State Lighting - A guide (IOP Publishing Ltd , 2022).
38. R. Karlicek, Handblook of Advance Lighting Technology ( Springer International Publishing Switzerland , 2017).
39. T. H. Yang, H. Y. Huang, C. C. Sun, B. Glorieux, X. H. Lee, Y. W. Yu, T. Y. Chung, “Noncontact and instant detection of phosphor temperature in phosphor-converted white LEDs,” Scientific Reports 8, 296 (2018).
40. Supernova website, https://supernova-lights.com/supernova/.
41. ISO 6742-1:2015 - Estonian Centre for Standardisation,2015 https://www.evs.ee/products/iso-6742-1-2015.
42. Kraftfahrt-Bundesamt, “Straßenverkehrs-Zulassungs-Ordnung StVZO 22a, 2015 3rd version,” https://www.kba.de/DE/Home/ home_node.html.
43. Magneti Marelli Automotive Lighting Launches new LED Module Production in NAFTA, 2016,http://www.magnetimarelli.com/press_room/news/magneti marelli automotive lighting launches newled module production nafta.
44. “ECE,” http://www.unece.org/trans/main/wp29/wp29regs101-120.html.
45. Virendra N. Mahajan, Optical Imaging and Aberrations, (SPIE, Washington, 1998).
46. Cree Inc. Products, https://cree-led.com/.
47. OSRAM GmbH Products, https://www.osram.com/cb/.
48. C. C. Sun, C. S. Wu, Y. S. Lin, Y. J. Lin, C. Y. Hsieh, S. K. Lin, T. H. Yang, and Y. W. Yu, “Review of optical design for vehicle forward lighting based on white LEDs,” Opt. Eng. 60, 091501 (2021).
49. C. C. Sun, C. S. Wu, C. Y. Hsieh, Y. H. Lee, S. K. Lin, T. X. Lee, T. H. Yang, and Y. W. Yu, “Single reflector design for integrated low/high beam meeting multiple regulations with light field management,” Opt. Express 29, 18865-18875 (2021).
50. I. Moreno, C.C.Sun, and R.Ivanov, “Far-field condition for light-emitting diode arrays,” Appl. Opt. 48,1190-1197(2009).
51. Kknew,耗時的CNC精加工，如何大幅提升效率？大開眼界website, https://kknews.cc/news/992zz2b.html.
52. Kuan-Tai Technology Co., LTD. Website, https://www.ktmtech.com.tw/.
53. 蔡直佑，高光效多功能LED投射光形之研究，國立中央大學光電所博士論文，中華民國一百零四年。
54. 蔡明修，應用於四晶發光二極體之全反射式光學設計，國立中央大學光電所碩士論文，中華民國九十九年。
55. 陳觀宇，高光效遠距離投射燈之研究，國立中央大學光電所碩士論文，中華民國一百零七年。
56. 吳同，失效LED車頭燈的截止線光形重建之研究，國立中央大學光電所碩士論文，中華民國一百零八年。
57. 李宇翔，歐規單一光學反光鏡之高亮度近遠燈之研究，國立中央大學光電所碩士論文，中華民國一百零九年。
58. 謝承諺，歐規之高對比度近遠燈設計與雜散光分析，國立中央大學光電所碩士論文，中華民國一百一十年。
59. 林依柔，發光二極體陣列用於德規近遠燈之研究，國立中央大學光電所碩士論文，中華民國一百一十年。

指導教授

楊宗勳孫慶成(Tsung-Hsun Yang Ching-Cherng Sun)

審核日期

2022-8-16

推文