參考文獻 |
[1] J. W. Goodman, Introduction to Fourier Optics., 2nd ED
[2] Stefan Sinzinger and Jürgen Jahns., Microoptics.
[3] L. Hazra, "Diffractive optical elements: past, present, and future." SPIE, Vol. 3729. (1999)
[4] Toshiaki Kita and Tatsuo Harada, "Use of aberration-corrected concave gratings in optical demultiplexers," Appl. Opt. Vol. 22, No. 6, pp. 819-825. (1983)
[5] Walter Da¨schner, Pin Long, Michael Larsson, and S. H. Lee, "Fabrication of diffractive optical elements using a single optical exposure with a gray level mask," J. Vac. Sci. Technol. B, Vol. 13, No. 6, (1995)
[6] Baohua Jia, Jesper Serbin, Hwi Kim, Byoungho Lee, Jiafang Li, and Min Gu, "Use of two-photon polymerization for continuous gray-level encoding of diffractive optical elements," Appl. Phys. Lett. 90, (2007)
[7] M. B. Stern and S. S. Medeiros, "Deep three-dimensional microstructure fabrication for infrared binary optics," J. Vac. Sci. Technol. B, Vol. 10, pp.2520-2525. (1992)
[8] H. Andersson, Mats Ekberg, Sverker Hård, Stellan Jacobsson, Michael Larsson, and T. Nilsson, "Single photomask, multilevel kinoforms in quartz and photoresist: manufacture and evaluation," Appl. Opt. Vol. 29, No. 28, pp. 4259-4267. (1990)
[9] Walter Däschner, Michael Larsson, and S. H. Lee, "Fabrication of monolithic diffractive optical elements by the use of e-beam direct write on an analog resist and a single chemically assisted ion-beam-etching step," Appl. Opt. Vol. 34, No. 14, pp. 2534-2539. (1995)
[10] Michael R. Wang and Heng Su, "Laser direct-write gray-level mask and one-step etching for diffractive microlens fabrication," Appl. Opt. Vol. 37, No. 32, pp. 7568-7576. (1998)
[11] C. M. Waits, A. Modafe, and R. Ghodssi, "Investigation of gray-scale technology for large area 3D silicon MEMS structures," Journal of Micromechanics and Microengineering, Vol. 13, No. 2, pp. 170-7, (2003)
[12] Y. Oppliger, P. Sixt, J.M. Stauffer, J.M. Mayor, P. Regnault, G. Voirin, "One-step 3D shaping using a gray-tone mask for optical and microelectronic applications," Microelectronic Engineering, Vol. 23, pp. 449-454. (1994)
[13] Jurgen Jahns and Susan J. Walker, "Two-dimensional array of diffractive microlenses fabricated by thin film deposition," Appl. Opt. Vol. 29, No. 7, (1990)
[14] W. Däschner, P. Long, R. Stein, C. Wu, and S. H. Lee, "Cost-effective mass fabrication of multilevel diffractive optical elements by use of a single optical exposure with a gray-scale mask on high-energy beam-sensitive glass," Appl. Opt. Vol. 36, No. 20, pp. 4675-4680. (1997)
[15 ] https://www.ti.com/
[16] E. Hecht, Optics., 5th ED
[17] Lee, Wai-Hon. "High efficiency multiple beam gratings." Appl. Opt. Vol. 18, No. 13, (1979)
[18] M. Yen Lin, C. H. Chuang, T. A. Chou, and C. Y. Chen, "A theoretical framework for general design of two materials composed diffractive fresnel lens," Scientific Reports, vol. 11, pp. 1-14, (2021)
[19] Dale A. Buralli, G. Michael Morris, and John R. Rogers. "Optical performance of holographic kinoforms." SPIE, Vol. 883, (1988)
[20] Stefan Bernet and Monika Ritsch-Marte, "Adjustable refractive power from diffractive moiré elements," Appl. Opt. Vol. 47, No. 21, pp. 3722-3730. (2008)
[21] Yuan Luo, et al. "Varifocal metalens for optical sectioning fluorescence microscopy." Nano Letters 21.12 (2021): 5133-5142.
[22] Zheng Liu, et al. "Wide-angle Moiré metalens with continuous zooming." JOSAB Vol. 36, No. 10, (2019) |