參考文獻 |
[1]ACI Committee 439, “Types of Mechanical Splices for Reinforcing Bars (ACI439.3R-07),” American Concrete Institute, Farmington Hills, MI, 2007, 24 pp.
[2]東京鐵鋼株式會社,「Neji-Tetsu-Con製品概要及實例介紹」,台灣高強度鋼筋混凝土(Taiwan New RC)結構施工技術與構件耐震性能研討會,國家地震工程研究中心,台北市,2019。
[3]詹耀裕、廖健閔,「談確保裝配式建築豎向結構連接質量的方法及工藝」,中國混凝土,107期,30-37頁,2018。
[4]中華民國國家標準,「CNS560鋼筋混凝土用鋼筋」,經濟部標準檢驗局,2014。
[5]林進祥、詹政書、盧致宏、林韋杉,「新世代螺紋節鋼筋ASTM等國際(外)標準與CNS國家標準差異性研究」,經濟部標準檢驗局新竹分局,2019。
[6]台灣混凝土學會TCI 技術報告,「高強度鋼筋續接器續接性能規範」,2014。
[7]中國土木水利工程學會,「混凝土工程設計規範與解說(土木401-110)」,台北,2011。
[8]中華民國國家標準,「CNS15560鋼筋機械式續接試驗法」,2014。
[9]ACI Committee 318, “Building code requirements for structural concrete (ACI 318-19) and commentary,” American Concrete Institute, Farmington Hills, MI, 2019, 623 pp.
[10]歐昱辰,「我國混凝土結構設計規範之因應」,ACI 318‐19主要變革與我國混凝土結設計規範之因應研討會,國家地震工程研究中心,台北市,2019。
[11]Caltrans, "Standard Specifications," Department of Transportation, California State Transportation Agency, State of California, Sacramento, 2018, 1302 pp.
[12]Caltrans, "California Test 670 - Method of Tests for Mechanical and Welded Reinforcing Steel Splices," Transportation Laboratory, Division of Engineering Services, Department of Transportation, California State Transportation Agency, State of California, Sacramento, 2013, 13 pp.
[13]李宏仁、林克強、張子宥、張子宥,「高強度鋼筋機械式續接性能合格標準及驗證研究」,內政部建築研究所委託研究報告,編號 10915G0012,2020。
[14]李宏仁、陳正誠、陳建中、張家榮,「建築工程鋼筋機械式續接性能基準及驗證研究」,內政部建築研究所研究報告,編號 106301070000G0032, 2017。
[15]公共工程委員會,「施工鋼要規範,第03210章 鋼筋」,V5.0,2018。
[16]日本土木学会, 鉄筋定着・継手指針[2007年版], 日本土木学会, 2007, 41-46 pp。
[17]Kim, Hyong-Kee, “Structural Performance of Steel Pipe Splice for SD500 High-strength Reinforcing Bar under Cyclic Loading,” Architectural research, 2008.
[18]Kuang Z, et al, “Computational and Experimental Mechanical Modelling of a Composite Grouted Splice Sleeve Connector System,” Materials (Basel), 2018.
[19]Liu, Yong, et al, “Numerical Analysis on Tensile Properties of Grout-filled Splice Sleeve Rebars under ISO 834 Standard Fire,” E3S Web of Conferences, 2018.
[20]Bao, Longsheng, “Finite element Analysis of Semi-Grouting Sleeve Connection Member Based on ABAQUS,” IOP Conference Series: Earth and Environmental Science, 2018.
[21]Cheng Yang, et al, “Effective stress-strain relationship for grouted sleeve connection: Modeling and experimental verification,” Engineering Structures, Vol 210, 2020.
[22]Tao Chen, et al, “Numerical modeling and parametric analysis of grouted connections under axial loading,” Thin-Walled Structures, Vol 154, 2020.
[23]Guanyu Zheng, “Mechanical performance for defective and repaired grouted sleeve connections under uniaxial and cyclic loadings,” Construction and Building Materials, Vol 233, 2020.
[24]Espoir Kulondwa Kahama, “numerical study on the influence of defects in grouting on the mechanical properties of a full grouted sleeve connector,” The Journal of Adhesion, 2022.
[25]ABAQUS Inc., “ABAQUS Theory Guide,” Version 6.12, 2012.
[26]Wahalathantri, et al, “A Material Model for Flexural Crack Simulation in Reinforced Concrete Elements Using ABAQUS,” eddBE2011 Proceedings, 2011.
[27]Zhen-Tian Chang, et al, “Short-term behaviour of shallow thin-walled concrete dome under uniform external pressure,” Thin-Walled Structures, Vol 49, 2011.
[28]Said M. Allam, et al, “Evaluation of tension stiffening effect on the crack width calculation of flexural RC members,” Alexandria Engineering Journal, vol. 52, 2013.
[29]Milad Hafezolghorani, et al, “Simplified Damage Plasticity Model for Concrete, Structural Engineering International,” Scientific Paper, 2017.
[30]Wei Demin, He Fukang, “Investigation for plastic damage constitutive models of the concrete material,” Procedia Engineering, Vol 210, pp. 71-78, 2017.
[31]Emmanuel Owoichoechi Momoh, et al, “Behavior of clamp-enhanced palm tendons reinforced concrete,” Construction and Building Materials, Vol 341, 2022.
[32]Ullah H, “Experimental Investigation of the Stress-Strain Behavior and Strength Characterization of Rubberized Reinforced Concrete,” Materials(Basel), 2022.
[33]Mohammed Altaee, et al, “Employment of damage plasticity constitutive model for concrete members subjected to high strain-rate,” European Union Digital Library(EUDL), 2020.
[34]J. Lubliner, “A plastic-damage model for concrete,” International Journal of Solids and Structures, Vol 25, 1989.
[35]Grassl, P., et al, “CDPM2: A damage-plasticity approach to modeling the failure of concrete,” arXiv, 2013.
[36]Reza Mousavi, et al, “EFFICIENCY OF DAMAGE-PLASTICITY MODELS IN CAPTURING COMPACTION-EXPANSION TRANSITION OF CONCRETE UNDER DIFFERENTCOMPRESSION LOADING CONDITIONS,” ECCOMAS Congress,2016.
[37]Xiao Y, et al, “Concrete plastic-damage factor for finite element analysis: Concept, simulation, and experiment,” Advances in Mechanical Engineering, 2017.
[38]B. Alfarah, et al, “New methodology for calculating damage variables evolution in Plastic Damage Model for RC structures,” Engineering Structures, Vol 132, 2017.
[39]Fedoroff, et al, “Behavior of the ABAQUS CDP model in simple stress states,” Journal of Structural Mechanics, Vol 52, 2019.
[40]Adam Wosatko, et al, “Role of dilatancy angle in plasticity-based models of concrete,” Archives of Civil and Mechanical Engineering, Vol 19, 2019.
[41]Hoang- Le Minh, et al, “A concrete damage plasticity model for predicting the effects of compressive high-strength concrete under static and dynamic loads,” Journal of Building Engineering, Vol 44, 2021.
[42]Faxing Ding, et al, “Practical design equations of the axial compressive capacity of circular CFST stub columns based on finite element model analysis incorporating constitutive models for high-strength materials,” Case Studies in Construction Materials, Vol 16, 2022.
[43]Abaqus Inc., “Abaqus Analysis User′s Guide,” Version 6.12, 2012.
[44]Michel Raous (LMA), M′hamed Ali Karray, et al, “Model coupling friction and adhesion for steel-concrete interfaces,” arXiv, 2010.
[45]BAEL 91, “Règles techniques de conception et de calcul des ouvrages et constructions en béton armé suivant la méthode des états limites,” Eyrolles, 1994.
[46]Raphael Jean Boulbes, “Troubleshooting Finite-Element Modeling with Abaqus, With Application in Structural Engineering Analysis, ” Springer, France, 2018. |