參考文獻 |
[ASTM1] ASTM B918/B918M-17a, Standard Practice for Heat Treatment of Wrought Aluminum Alloy (2017)
[ASTM2] ASTM B221M-13, Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric) (2005)
[ASTM3] ASTM E1558-09, Standard Guide for Electrolytic Polishing of Metallographic Specimens (2014)
[ASTM4] ASTM E18-15, Standard Test Methods for Rockwell Hardness of Metallic Metals (2015)
[ASTM5] ASTM E8/E8M-16a, Standard Test Methods for Tension Testing of Metallic Materials (2016)
[BER] L. K. Berg, J. Gjonnes, V. Hansen, X. Z. Li, GP-zones in Al–Zn–Mg alloys and their role in artificial aging, Acta mater, Vol. 49, pp. 3443–3451 (2001)
[CHA] H. M. Chan, F. J. Humphreys, Effect of particle stimulated orientation of recrystallized grains, Metal Science, Vol.18, pp.527-530 (1984)
[CHE] S. Chen, K. Chen, G. Peng, X. Liang, X. Chen, Effect of quenching rate on microstructure and stress corrosion cracking of 7085 aluminum alloy, Transactions of Nonferrous Metals Society of China, Vol. 22, pp. 47-52 (2012)
[CHI] Y. C. Chiu, D. K. Ting, S. L. Lee, The effects of Cu, Zn, and Zr on the solution temperature and quenching sensitivity of Al-Zn-Mg-Cu, Materials Chemistry and Physics, Vol. 247, No. 122853 (2020)
[CLA] L. M. Clarebrough, M. E. Hargreaves, G. W. WestSource, The release of energy during annealing of deformed metals, Mathematical and Physical Sciences, Vol. 232, pp. 252-270 (1955)
[DAI] P. Dai, X. Luo, Y. Yang, Z. Kou, B. Huang, C. Wang, J. Zang, J. Ru, Nano-scale precipitate evolution and mechanical properties of 7085 aluminum alloy during thermal exposure, Materials Science & Engineering A, Vol. 729, pp. 411-422 (2018)
[DAV] J. R. Davis and Associates, ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International Materials Park, pp. 34-36 (2007)
[DAVY] V. G. Davydov, T. D. Rostova, Scientific principles of making an alloying addition of scandium to aluminum alloys, Materials Science and Engineering A, Vol. 280, pp. 30-36 (2000)
[DEN1] Y. Deng, L. Wan, Y. Zhang, X. Zhang, Influence of Mg content on quench sensitivity of Al–Zn–Mg–Cu aluminum alloys, Journal of Alloys and Compounds. Vol. 509, pp. 4636–4642 (2011)
[DEN2] Y. Deng, Y. Zhang, L. Wan, A. Zhu, X. Zhang, Three-stage homogenization of Al-Zn-Mg-Cu alloys containing trace Zr, Metallurgical and Materials Transactions A. Vol. 44, pp. 2470-2477 (2013)
[DUR] T. Dursun, C. Soutis, Recent developments in advanced aircraft aluminum alloys, Materials and Design, Vol. 56, pp. 862–871 (2014)
[GAL] D. B. Gallardy, Ballistic Evaluation of 7056 Aluminum, US Army Research Laboratory (2017)
[GOR] P. Gordon, Microcalorimetric Investigation of Recrystallization of Copper, Journal of Metals, Vol. 7, pp. 1043-1052 (1955)
[GOU] S. Gourdet, F. Montheillet, An experimental study of the recrystallization mechanism during hot deformation of aluminium, Materials Science and Engineering: A, Vol. 283, pp. 274-288 (2000)
[GUO] Z. Guo, G Zhao, X. Chen, Effects of two-step homogenization on precipitation behavior of Al3Zr dispersoids and recrystallization resistance in 7150 aluminum alloy, Materials Characterization. Vol. 102, pp. 122-130 (2015)
[HEA] J. T. Healey, R. W. Gould, Effect of thermal and mechanical pretreatments on the guinier-preston zone state of a commercial 7075 aluminum alloy, Metallurgical Transactions A, Vol. 8, pp. 1907-1910 (1977)
[HUM] F.J. Humphreys, M. Hatherly, Recrystallination and related annealing phenomena, ELSEVIER Ltd, pp.170-213 (2004)
[ITO] G. Itoh, T. Eto, Y. Miyagi M. Kanno, Al-Zn-Mg alloys, Japan Science and Technology, Vol. 38, No.12, pp. 818-839 (1988)
[IWA] S. Iwamura, Y. Miura, Loss in coherency and coarsening behavior of A13Sc precipitates, Acta Materialia, Vol. 52, pp. 591-600 (2004)
[JIA] Z. H. Jia, Precipitation behavior of A13Zr precipitate in Al-Cu-Zr and Al-Cu-Zr-Ti-V alloys, Transactions of Nonferrous Metals Society of China. Vol. 22, pp. 1860-1865 (2012)
[KAS] K. T. Kashyap, Effect of zirconium addition on the recrystallization behavior of a commercial Al-Cu-Mg alloy, Material Science, Vol. 24, No. 6, pp. 643-648 (2001)
[KNI] K. E. Knipling, D. C. Dunand, Criteria for developing castable, creep-resistant aluminum-based alloys - A review, Zeitschrift für Metallkunde, Vol. 97, No. 3, pp. 246-265 (2006)
[LEE] S. L. Lee, C. T. Wu, Y. D. Chen, Effects of minor Sc and Zr on the microstructure and mechanical properties of Al-4.6Cu-0.3Mg-0.6Ag alloys, Journal of Materials Engineering and Performance, Vol. 24, pp. 1165-1172 (2015)
[LIM] S.T. Lim, S.J. Yun, Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications, Materials Science and Engineer, Vol. 371, pp. 82-90 (2004)
[LIU1] J. Liu, Y. Zhang, X. Li, Z. Li, B. Xiong, J. Zhang, Phases and microstructures of high Zn-containing Al–Zn–Mg–Cu alloys, Rare Metals, Vol. 35, pp. 380-384 (2014)
[LIU2] S. Liu, W. Liu, Effect of microstructure on the quench sensitivity of AlZnMgCu alloys, Journal of Alloys and Compounds, Vol. 507, pp. 53-61 (2010)
[LIU3] J. Liu, P. Yao, N. Zhao, C. Shi, H . Li, X. Li, D. Xi, S. Yang, Effect of minor Sc and Zr on recrystallization behavior and mechanical properties of novel Al-Zn-Mg-Cu alloys. Journal of Alloys and Compounds, Vol. 657, pp. 717-725 (2016)
[LIU4] S.D. Liu, X.M. Zhang, Influence of aging on quench sensitivity effect of 7055 aluminum alloy, Materials Characterization, Vol. 59, pp. 53-60 (2008)
[LUN] O. B. Lung, Y. J. Gang, W. M. Yu, Effect of homogenization and aging treatment on mechanical properties and stress-corrosion cracking of 7050 alloys, Metallurgical and Materials Transactions A, Vol. 38A, pp. 1760-1773 (2007)
[MAR] J. W. Martin, Micromechanisms in particle-hardened alloys, Cambridge University Press, p. 78 (1980)
[OU] B. Ou, J. Yag, M. Wei, Effect of Homogenization and Aging Treatment on Mechanical Properties and Stress-Corrosion Cracking of 7050 Alloys, Metallurgical and Materials Transactions A, Vol. 38A, pp. 1760-1773 (2007)
[PAN] T. Pan, Y. Tzeng, H. Bor, K. Liu, S. Lee, Effects of the coherency of Al3Zr on the microstructures and quench sensitivity of Al–Zn–Mg–Cu alloys, Materials Today Communications. Vol. 28, 102611 (2021)
[PEN] G. S. Peng, K. H. Chen, S. Y. Chen, H. C. Fang, Influence of repetitious-RRA treatment on the strength and SCC resistance of Al-Zn-Mg-Cu alloy, Materials Science and Engineering A, Vol. 528, pp. 4014-4018 (2011)
[RAJ] R. Rajan, P. Kah, B. Myola, J. Martikainen, Trends in aluminum alloy development and their joining methods, Review Advance Material Science, Vol. 44, pp. 383-397 (2016)
[RAM] P. Rambabu, N. Eswara Prasad, V.V. Kutumbarao, R. J. H. Wanhill, Aerospace Materials and Material Technologies - Chapter 2:Aluminum alloys for aerospace applications, Springer Science, Vol. 1, pp. 29-52 (2017)
[ROB1] E. Robert, R. Abbaschian, L. Abbaschian, Physical Metallurgy Principles, 4th edition, p. 237 (2010)
[ROB2] J.S. Robinson, D.A. Tanner, C.E. Truman, A.M. Paradowska, R.C. Wimpory, The influence of quench sensitivity on residual stresses in the aluminium alloys 7010 and 7075, Materials Characterization,Vol. 65, pp. 73-85 (2012)
[SHA] Gang Sha, Alfred Cerezo, Early-stage precipitation in Al-Zn-Mg-Cu alloy (7050), Acta Materialia, Vol. 52, pp. 4503-4516 (2004)
[SON] L. Song, S. Liu, A new method for fast statistical measurement of interfacial misfit strain around nano-scale semi-coherent particles, RSC Advances (2017)
[SPE] M. O. Speidel, M. V. Htatt, Advances in Corrosion Science and Technology, Vol. 2, pp. 115-127 (1972)
[SU] Q. Su, J. Xu, H. Yu, Effect of Grain Size on Formability and Deformation Mechanism of High-Purity Aluminum during Micro-Embossing Process at Elevated Temperature, Advanced Engineering Materials, Vol. 21, pp.164-528 (2019)
[SUN1] Y. Sun, X. Bai, D. Klenosky, K. Trumble, D. Johnson, A study on peripheral grain structure evolution of an AA7050 aluminum alloy with a laboratory-scale extrusion setup, Journal of Materials Engineering and Performance, Vol. 28, pp. 5156–5164 (2019)
[SUN2] F. Sun, G. Liu, Q. Li, E. Liu, C. He, C. Shi, N. Zhao, Effect of Sc and Zr additions on microstructures and corrosion behavior of Al-Cu-Mg-Sc-Zr alloys, Journal of Materials Science & Technology, Vol. 33, pp. 1015-1022 (2017)
[TAN] J. Tang, H. Chen, X. M. Zhang, Influence of quench-induced precipitation on aging behavior of Al-Zn-Mg-Cu alloy, Transactions of Nonferrous Metals Society of China. Vol. 22, pp. 1255-1263 (2012)
[TZE] Y. Tzeng, C. Chung, H. Chien, Effects of trace amounts of Zr and Sc on the recrystallization behavior and mechanical properties of Al-4.5Zn-1.6Mg alloys, Materials Letters, Vol. 228, pp. 270-272 (2018)
[WAR] T. Warner, Recently-developed aluminum solutions for aerospace applications, Materials Science Forum, Vol. 519-521, pp. 1271-1278 (2006)
[WANG] Y. Wang, L. Cao, Effect of retrogression treatments on microstructure, hardness and corrosion behaviors of aluminum alloy 7085, Journal of Alloys and Compounds, Vol. 814, No.152264 (2020)
[WU] L. Wu, W. Wang, Y. Hsu, S. Trong, Effects of homogenization treatment on recrystallization behavior and dispersoid distribution in an Al-Zn-Mg-Sc-Zr alloy, Journal of Alloys and Compounds, Vol. 456, pp. 163-169 (2008)
[XIA] T. Xiao, Y. Deng, L. Ye a, H. Lin, C. Shan, P. Qian, Effect of three-stage homogenization on mechanical properties and stress corrosion cracking of Al-Zn-Mg-Zralloys, Materials Science and Engineering: A, Vol. 675, pp. 280-288 (2016)
[XU] D. K. Xu, P. A. Rometsch, N. Birbilis, Improved solution treatment for an as-rolled Al–Zn–Mg–Cu alloy, Materials Science and Engineering A, Vol. 534, pp. 234-243 (2012)
[YU] X. Yu, G. jun, Paul Rometsch, W. juan, Effect of one-step and two-step homogenization treatments on distribution of Al3Zr dispersoids in commercial AA7150 aluminium alloy, Journal of Alloys and Compounds, Vol. 456, pp. 163-169 (2008)
[ZHA2] Y. Zhang, D. Pelliccia, B. Milkereit, N. Kirby, M. Starink, P. Rometsch, Analysis of age hardening precipitates of Al-Zn-Mg-Cu alloys in a wide range of quenching rates using small angle X-ray scattering, Materials and Design, Vol. 142, pp. 259-267 (2018)
[ZHA1] M. Zhang, T. Liu, C. He, Ji. Ding, E. Liu, C. Shi, J. Li, I. Zhao, Evolution of microstructure and properties of Al-Zn-Mg-Cu-Sc-Zr alloy during aging treatment, Journal of Alloys and Compounds, Vol. 658, pp. 946-951 (2016)
[ZHA3] M. Zhang, C. Li, Y. Zhang, S. Liu, J. Jiang, J. Tang, L. Ye, X. Zhang, Effect of hot deformation on microstructure and quenching-induced precipitation behavior of Al-Zn-Mg-Cu alloy, Materials Characterization. Vol. 172, pp. 110861 (2021)
[ZHA4] Y. Zhang, C. Bettles, P. Rometsch, Effect of recrystallisation on Al3Zr dispersoid behaviour in thick plates of aluminium alloy AA7150, Journal of Materials Science, Vol. 49, pp. 1709-1715 (2014)
[ZHAO] J. Zhao, Y. Deng, Effects of initial grain size of Al-Zn-Mg-Cu alloy on the recrystallization behavior and recrystallization mechanism in isothermal compression, Metals, Vol. 9, No.110 (2019)
[ZHE] Y. Zheng, C. Li, S. Liu, Y. Deng, X. Zhang, Effect of homogenization time on quench sensitivity of 7085 aluminum alloy, Transactions of Nonferrous Metals Society of China. Vol. 24 pp. 2275-2281 (2014)
[ZHEN] L. Zhen, J. Chen, S. Yang, W. Shao, S. Dai, Development of microstructures and texture during cold rolling in AA 7055aluminum alloy, Materials Science and Engineering A, Vol. 504, pp. 55-63 (2009) |