參考文獻 |
1. K. H. Nguyen, P. A. Lee, and B. H. Kim, “Experimental Investigation of ECDM for Fabricating Micro Structures of Quartz,” International Journal of Precision Engineering and Manufacturing, Vol. 16, pp. 5-12, 2015.
2. V. Rajput, S. S. Pundir, M. Goud, and N. M. Suri, “Multi-Response Optimization of ECDM Parameters for Silica (Quartz) Using Grey Relational Analysis,” Silicon, Vol. 13, pp. 1619-1640, 2021.
3. C. H. Yang and H. P. Tsui, “Study on Ultrasonic-Assisted WECDM of Quartz Wafer with Continuous Electrolyte Flow,” The International Journal of Advanced Manufacturing Technology, Vol. 118, pp. 1061-1076, 2022.
4. EDNTaiwan Electronic Technology Design, CMEMS Technology Using CMOS Process, https://archive.edntaiwan.com/www.edntaiwan.com/ART_8800514025_3000004_TA_2bedd124.HTM, accessed on March 4, 2023.
5. Semiconductor Engineering, What’s What in Advanced Packaging, https://semiengineering.com/whats-what-in-advanced-packaging, accessed on March 4, 2023.
6. K. Maity and H. Mishra, “ANN Modelling and Elitist Teaching Learning Approach for Multi-Objective Optimization of µ-EDM,” Journal of Intelligent Manufacturing, Vol. 29, pp. 1599-1616, 2018.
7. Y. P. Zeng, C. L. Lin, H. M. Dai, Y. C. Lin, and J. C. Hung, “Multi-Performance Optimization in Electrical Discharge Machining of Al2O3 Ceramics Using Taguchi Base AHP Weighted TOPSIS Method,” Processes, Vol. 9, 1647, 2021.
8. M. Kunieda, B. Lauwers, K. P. Rajurkar, and B. M. Schumacher, “Advancing EDM Through Fundamental Insight into the Process,” CIRP Annals, Vol. 54, pp. 64-87, 2005.
9. K. H. Ho and S. T. Newman, “State of the Art Electrical Discharge Machining (EDM),” International Journal of Machine Tools & Manufacture, Vol. 29, pp. 1287-1300, 2003.
10. J. Kozak, K. P. Rajurkar, and N. Chandarana, “Machining of Low Electrical Conductive Materials by Wire Electrical Discharge Machining (WEDM),” Journal of Materials Processing Technology, Vol. 149, pp. 266-271, 2004.
11. N. Mohri, Y. Fukuzawa, T. Tani, N. Saito, and K. Furutani, “Assisting Electrode Method for Machining Insulating Ceramics,” CIRP Annals - Manufacturing Technology, Vol. 45, pp. 201-204, 1996.
12. A. Schubert, H. Zeidler, R. Kühn, M. H. Oschätzchen, S. Flemmig, and N. Treffkorn, “Investigation of Ablation Behaviour in Micro-EDM of Nonconductive Ceramic Composites ATZ and Si3N4-TiN,” Procedia CIRP, Vol. 42, pp. 727-732, 2016.
13. A. Rashid, A. Perveen, and M. P. Jahan, “Understanding Novel Assisted Electrode from a Theoretical and Experimental Perspectives for EDM of Aluminum Nitride Ceramics,” The International Journal of Advanced Manufacturing Technology, Vol. 116, pp. 2959-2973, 2021.
14. B. Shinde and R. Pawade, “Study on Analysis of Kerf Width Variation in WEDM of Insulating Zirconia,” Materials and Manufacturing Processes, Vol. 36, pp. 1010-1018, 2021.
15. M. Srivastava, “Study of Machining Non-Conducting Materials Using EDM,” International Journal of Engineering Trends and Technology, Vol. 34, pp. 88-92, 2016.
16. D. K. Panda and R. K. Bhoi, “Artificial Neural Network Prediction of Material Removal Rate in Electro Discharge Machining,” Materials and Manufacturing Processes, Vol. 20, pp. 645-672, 2005.
17. S. N. Sahu and N. C. Nayak, “Multi-Objective Optimisation of EDM Process Using ANN Integrated with NSGA-II Algorithm,” International Journal of Manufacturing Technology and Management, Vol. 32, pp. 381-395, 2018.
18. S. K. Tamang, N. Natarajan, and M. Chandrasekaran, “Optimization of EDM Process in Machining Micro Holes for Improvement of Hole Quality,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 39, pp. 1277-1287, 2017.
19. L. Zhang, Z. Jia, F. Wang, and W. Liu, “A hybrid Model Using Supporting Vector Machine and Multi-Objective Genetic Algorithm for Processing Parameters Optimization in Micro-EDM,” The International Journal of Advanced Manufacturing Technology, Vol. 51, pp. 575-586, 2010.
20. K. P. Somashekhar, N. Ramachandran, and J. Mathew, “Optimization of Material Removal Rate in Micro-EDM Using Artificial Neural Network and Genetic Algorithms,” Materials and Manufacturing Processes, Vol. 25, pp. 467-475, 2010.
21. R. Eberhart and J. Kennedy, "A New Optimizer Using Particle Swarm Theory,” In MHS′95. Proceedings of the Sixth International Symposium on Micro Machine and Human Science, Nagoya, Japan, October 4-6, 1995.
22. G. E. Hinton, Si. Osindero, and Y. W. Teh, “A Fast Learning Algorithm for Deep Belief Nets,” Neural Computation, Vol. 18, pp. 1527-1554, 2006.
23. Amazon AWS, What is Deep Learning, https://aws.amazon.com/tw/what-is/deep-learning, accessed on March 22, 2023.
24. N. I. Chernov and G. A. Ososkov, “Effective Algorithms for Circle Fitting,” Computer Physics Communications, Vol. 33, pp. 329-333, 1984.
25. H. Jia, J. Lin, and J. Liu, “An Earthquake Fatalities Assessment Method Based on Feature Importance with Deep Learning and Random Forest Models,” Sustainability, Vol. 11, 2727, 2019.
26. A. Safari, “A PSO Procedure for a Coordinated Tuning of Power System Stabilizers for Multiple Operating Conditions,” Journal of Applied Research and Technology, Vol. 11, pp. 665-673, 2013.
27. R. R. Picard and R. D. Cook, “Cross-Validation of Regression Models,” Journal of the American Statistical Association, Vol. 79, pp.575-583, 1984.
28. P. Kuppan, A. Rajadurai, and S. Narayanan, “Influence of EDM Process Parameters in Deep Hole Drilling of Inconel 718,” The International Journal of Advanced Manufacturing Technology, Vol. 38, pp. 74-84, 2008.
29. M. K. Dikshit, J. Anand, D. Narayan, and S. Jindal, “Machining Characteristics and Optimization of Process Parameters in Die-Sinking EDM of Inconel 625,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 41, 302, 2019.
30. A. Bilal, A. Perveen, D. Talamona, and M. P. Jahan, “Understanding Material Removal Mechanism and Effects of Machining Parameters During EDM of Zirconia-Toughened Alumina Ceramic,” Micromachines, Vol. 12, 67, 2021.
31. M. Bhaumik and K. Maity, “Effect of Electrode Materials on Different EDM Aspects of Titanium Alloy,” Silicon, Vol. 11, pp. 187–196, 2019.
32. L. Cheng, J. D. Vos, P. Zhao, M. Yang, and F. Witlox, “Examining Non-Linear Built Environment Eeffects on Elderly’s Walking: A Random Forest Approach,” Transportation Research Part D: Transport and Environment, Vol. 88, 102552, 2020.
33. M. N. Rohman, J. R. Ho, P. C. Tung, H. P. Tsui and C. K. Lin , “Prediction and Optimization of Geometrical Quality for Pulsed Laser Cutting of Non-Oriented Electrical Steel Sheet,” Optics & Laser Technology, Vol.149,107847, 2022. |