參考文獻 |
[1]中鋼公司官網:鋼品生產流程圖。取自https://www.csc.com.tw/csc/pd/prs.htm
[2]Yu, Y.," EXPERIMENTAL AND DISCRETE ELEMENT SIMULATION STUDIES OF BELL-LESS CHARGING OF BLAST FURNACE". Department of Chemical Engineering Åbo Akademi University, Proefschrift, 2013.
[3]Zhang, J., J. Qiu, H. Guo, S. Ren, H. Sun, G. Wang, and Z. Gao," Simulation of particle flow in a bell-less type charging system of a blast furnace using the discrete element method". Particuology, 2014, Vol. 16, pp. 167-177.
[4]Cundall, P.A. and O.D. Strack," A discrete numerical model for granular assemblies". geotechnique, 1979, Vol. 29(1), pp. 47-65.
[5]Carvalho, R., A. Kwade, and L. Tavares," Contact parameter estimation for DEM simulation of iron ore pellet handling". Powder Technology, 2013, Vol. 248, pp. 84-93.
[6]Yan, Z., S. Wilkinson, E. Stitt, and M. Marigo," Discrete element modelling (DEM) input parameters: understanding their impact on model predictions using statistical analysis". Computational Particle Mechanics, 2015, Vol. 2, pp. 1-17.
[7]Chen, H., Y.G. Xiao, Y.L. Liu, and Y.S. Shi," Effect of Young′s modulus on DEM results regarding transverse mixing of particles within a rotating drum". Powder Technology, 2017, Vol. 318.
[8]Lommen, S., D. Schott, and G. Lodewijks," DEM speedup: Stiffness effects on behavior of bulk material". Particuology, 2014, Vol. 12, pp. 107-112.
[9]Adema, A.T., " DEM-CFD Modelling of the ironmaking blast furnace". Materials Science and Engineering of Delft University of Technology, Proefschrift, March 2014.
[10]Yu, Y. and H. Saxen," Particle Flow and Behavior at Bell‐Less Charging of the Blast Furnace". steel research international, 2013, Vol. 84.
[11]Wei, H., L. Zan, Y. Li, Z. Wang, H. Saxén, and Y. Yu," Numerical and experimental studies of corn particle properties on the forming of pile". Powder Technology, 2017, Vol. 321, pp. 533-543.
[12]Mei, L., J. Hu, J. Yang, and J. Yuan," Research on parameters of EDEM simulations based on the angle of repose experiment". International Conference on Computer Supported Cooperative Work in Design (CSCWD), 2016, pp. 570-574.
[13]Wang, L., R. Li, B. Wu, Z. Wu, and Z. Ding," Determination of the coefficient of rolling friction of an irregularly shaped maize particle group using physical experiment and simulations". Particuology, 2018, Vol. 38, pp. 185-195.
[14]Wei, S., H. Wei, H. Saxen, and Y. Yu," Numerical Analysis of the Relationship between Friction Coefficient and Repose Angle of Blast Furnace Raw Materials by Discrete Element Method". Materials, 2022, Vol. 15(3), pp. 903.
[15]Qiu, J., D. Ju, J. Zhang, and Y. Xu," DEM simulation of particle flow in a parallel-hopper bell-less charging apparatus for blast furnace". Powder Technology, 2017, Vol. 314, pp. 218-231.
[16]Wei, H., X. Tang, Y. Ge, M. Li, H. Saxén, and Y. Yu," Numerical and experimental studies of the effect of iron ore particle shape on repose angle and porosity of a heap". Powder Technology, 2019, Vol. 353, pp. 526-534.
[17]Yu, Y., A. Westerlund, T. Paananen, and H. Saxen," Inter-particle Percolation Segregation during Burden Descent in the Blast Furnace". ISIJ international, 2011, Vol. 51, pp. 7.
[18]Wei, H., W. Ding, Y. Li, H. Nie, H. Saxén, H. Long, and Y. Yu," Porosity distribution of moving burden layers in the blast furnace throat". Granular Matter, 2021, Vol. 23(1), pp. 10.
[19]Mitra, T. and H. Saxén," Discrete element simulation of charging and mixed layer formation in the ironmaking blast furnace". Computational Particle Mechanics, 2016, Vol. 3(4), pp. 541-555.
[20]Wei, H., H. Nie, Y. Li, H. Saxén, Z. He, and Y. Yu," Measurement and simulation validation of DEM parameters of pellet, sinter and coke particles". Powder Technology, 2020, Vol. 364, pp. 593-603.
[21]Natsui, S., S. Ueda, M. Oikawa, Z. Fan, J. Kano, R. Inoue, and T. Ariyama," Optimization of Physical Parameters of Discrete Element Method for Blast Furnace and Its Application to the Analysis on Solid Motion around Raceway". ISIJ International, 2009, Vol. 49(9), pp. 1308-1315.
[22]Mio, H., M. Kadowaki, S. Matsuzaki, and K. Kunitomo," Development of particle flow simulator in charging process of blast furnace by discrete element method". Minerals Engineering, 2012, Vol. 33, pp. 27-33.
[23]Xu, W., S. Cheng, and C. Li," Effect of the charging sequence of iron-bearing burden on burden distribution during the charging process of blast furnace based on discrete element method". Ironmaking & Steelmaking, 2022, Vol. 49(2), pp. 208-216.
[24]Wu, S., M. Kou, J. Xu, X. Guo, K. Du, W. Shen, and J. Sun," DEM simulation of particle size segregation behavior during charging into and discharging from a Paul-Wurth type hopper". Chemical Engineering Science, 2013, Vol. 99, pp. 314-323.
[25]Zhang, T.F., J.Q. Gan, A.B. Yu, D. Pinson, and Z.Y. Zhou," Size segregation of granular materials during Paul-Wurth hopper charging and discharging process". Powder Technology, 2021, Vol. 378, pp. 497-509.
[26]Xu, W., S. Cheng, Q. Niu, and G. Zhao," Effect of the Main Feeding Belt Position on Burden Distribution during the Charging Process of Bell-less Top Blast Furnace with Two Parallel Hoppers". ISIJ International, 2017, Vol. 57(7), pp. 1173-1180.
[27]Yu, Y. and H. Saxén," Segregation behavior of particles in a top hopper of a blast furnace". Powder Technology, 2014, Vol. 262, pp. 233-241.
[28]Zhang, T.F., J.Q. Gan, A.B. Yu, D. Pinson, and Z.Y. Zhou," Segregation of granular binary mixtures with large particle size ratios during hopper discharging process". Powder Technology, 2020, Vol. 361, pp. 435-445.
[29]Xu, W., S. Cheng, Q. Niu, W. Hu, and J. Bang," Investigation on the uneven distribution of different types of ores in the hopper and stock surface during the charging process of blast furnace based on discrete element method". Metallurgical Research & Technology, 2019, Vol. 116, pp. 314 -322.
[30]Tsuji, Y., T. Tanaka, and T. Ishida," Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe". Powder Technology, 1992, Vol. 71(3), pp. 239-250.
[31]Li, T., Y. Peng, Z. Zhu, S. Zou, and Z. Yin," Discrete Element Method Simulations of the Inter-Particle Contact Parameters for the Mono-Sized Iron Ore Particles". Materials, 2017, Vol. 10(5).
[32]Hlosta, J., L. Jezerská, J. Rozbroj, D. Žurovec, J. Nečas, and J. Zegzulka," DEM Investigation of the Influence of Particulate Properties and Operating Conditions on the Mixing Process in Rotary Drums: Part 1—Determination of the DEM Parameters and Calibration Process". Processes, 2020, Vol. 8(2).
[33]Akashi, M., H. Mio, A. Shimosaka, Y. Shirakawa, J. Hidaka, and S. Nomura," Estimation of Bulk Density Distribution in Particle Charging Process Using Discrete Element Method Considering Particle Shape". ISIJ International, 2008, Vol. 48(11), pp. 1500-1506.
[34]Xu, Y., J. Xu, C. Sun, K. Ma, C. Shan, L. Wen, S. Zhang, and C. Bai," Quantitative comparison of binary particle mass and size segregation between serial and parallel type hoppers of blast furnace bell-less top charging system". Powder Technology, 2018, Vol. 328, pp. 245-255.
[35]Chibwe, D.K., G.M. Evans, E. Doroodchi, B.J. Monaghan, D.J. Pinson, and S.J. Chew," Charge material distribution behaviour in blast furnace charging system". Powder Technology, 2020, Vol. 366, pp. 22-35.
[36]Luo, Z., Y. You, H. Li, H. Zhou, and Z. Zou," Experimental Study on Charging Process in the COREX Melter Gasifier". Metallurgical and Materials Transactions B, 2018, Vol. 49(4), pp. 1740-1749.
[37]Honeyands, T., J. Truelove, D. Trotter, A. Brent, D. Varcoe, J. Seneviratne, and S. Sun," Performance of HBI in scrap pre-heating systems". SCANMET I : 1st International Conference on Process Development in Iron and Steelmaking, 2000, Vol. 29, pp. 61-74. |