參考文獻 |
[1] E. Olivoni, R. Vertechy, V. Parenti-Castelli, Power skiving manufacturing process: A review, Mechanism and Machine Theory. 175 (2022) 104955.
ttps://doi.org/10.1016/j.mechmachtheory.2022.104955.
[2] F. Klocke, Gear Cutting, in: The International Academy for Production Engineering, L. Laperrière, G. Reinhart (Eds.), CIRP Encyclopedia of Production Engineering, Springer Berlin Heidelberg, Berlin, Heidelberg, 2014: pp. 569–576.
https://doi.org/10.1007/978-3-642-20617-7_6405.
[3] Development of New Method to Cut Internal Gear, (n.d.).
[4] Alfonso Fuentes Faydor L. Litvin, Ignacio Gonzalez-Perez, Alessandro Piscopo, and Paolo Ruzziconi, University of Chicago, Chicago, Illinoi, Face Gear Drive With Helical Involute Pinion: Geometry, Generation by a Shaper and a Worm, Avoidance of Singularities and Stress Analy, n.d.
ttps://www.researchgate.net/publication/24329648_Face_Gear_Drive_With_Helical_Involute_Pinion_Geometry_Generation_by_a_Shaper_and_a_Worm_Avoidance_of_Singularities_and_Stress_Analysis.
[5] F.L. Litvin, J.-C. Wang, R.B. Bossler, Y.-J.D. Chen, G. Heath, D.G. Lewicki, Application of Face-Gear Drives in Helicopter Transmissions, Journal of Mechanical Design. 116 (1994) 672–676. https://doi.org/10.1115/1.2919434.
[6] S. Mo, S. Wang, B. Luo, H. Bao, G. Cen, Y. Huang, Research on the skiving technology of face gear, Int J Adv Manuf Technol. 121 (2022) 5181–5196.
https://doi.org/10.1007/s00170-022-09663-6.
[7] S. Mo, S. Wang, B. Luo, Z. Liu, G. Cen, Y. Huang, Machining principle and cutter design of face gear skiving, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 237 (2023) 468–480.
https://doi.org/10.1177/09544054221101772.
[8] Z. Han, C. Jiang, X. Deng, Machining and meshing analysis of face gears by power skiving, JAMDSM. 16 (2022) JAMDSM0002–JAMDSM0002.
https://doi.org/10.1299/jamdsm.2022jamdsm0002.
[9] H. Guo, T. Ma, S. Zhang, N. Zhao, A. Fuentes-Aznar, Computerized generation and surface deviation correction of face gear drives generated by skiving, Mechanism and Machine Theory. 173 (2022) 104839.
https://doi.org/10.1016/j.mechmachtheory.2022.104839.
[10] G. Feng, Z. Xie, M. Zhou, Geometric design and analysis of face-gear drive with involute helical pinion, Mechanism and Machine Theory. 134 (2019) 169–196.
https://doi.org/10.1016/j.mechmachtheory.2018.12.020.
[11] F.L. Litvin, A. Fuentes, Gear Geometry and Applied Theory, 2nd ed., Cambridge University Press, 2004.
https://doi.org/10.1017/CBO9780511547126.
[12] F.L. Litvin, A. Fuentes, C. Zanzi, M. Pontiggia, R.F. Handschuh, Face-gear drive with spur involute pinion: geometry, generation by a worm, stress analysis, Computer Methods in Applied Mechanics and Engineering. 191 (2002) 2785–2813.
https://doi.org/10.1016/S0045-7825(02)00215-3.
[13] F.L. Litvin, I. Gonzalez-Perez, A. Fuentes, D. Vecchiato, B.D. Hansen, D. Binney, Design, generation and stress analysis of face-gear drive with helical pinion, Computer Methods in Applied Mechanics and Engineering. 194 (2005) 3870–3901. https://doi.org/10.1016/j.cma.2004.09.006.
[14] D.A. Binney, H. Vinayak, Y. Gmirya, L.M. Zunski, D.R. Houser, E.C. Ames, Face Gear Transmission Development Program at Sikorsky Aircraft, in: Volume 4: 9th International Power Transmission and Gearing Conference, Parts A and B, ASMEDC, Chicago, Illinois, USA, 2003: pp. 307–313. https://doi.org/10.1115/DETC2003/PTG-48039.
[15] H.A. Zschippang, S. Weikert, K.A. Küçük, K. Wegener, Face-gear drive: Geometry generation and tooth contact analysis, Mechanism and Machine Theory. 142 (2019) 103576. https://doi.org/10.1016/j.mechmachtheory.2019.103576.
[16] X. Chu, Y. Wang, S. Du, Y. Huang, G. Su, D. Liu, L. Zang, An efficient generation grinding method for spur face gear along contact trace using disk CBN wheel, Int J Adv Manuf Technol. 110 (2020) 1179–1187. https://doi.org/10.1007/s00170-020-05927-1.
[17] Y. Shen, J. Tong, Technology of Gear Shaping of Face Gear and Experimental Studies, in: 2010 International Conference on Digital Manufacturing & Automation, IEEE, Changcha, TBD, China, 2010: pp. 609–612. https://doi.org/10.1109/ICDMA.2010.167.
[18] Y.-Z. Wang, Z. Lan, L.-W. Hou, H.-P. Zhao, Y. Zhong, A generating milling method for a spur face gear using a five-axis computer numerical control milling machine, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 230 (2016) 1440–1450. https://doi.org/10.1177/0954405415619346.
[19] E. Guo, R. Hong, X. Huang, C. Fang, Research on the design of skiving tool for machining involute gears, J Mech Sci Technol. 28 (2014) 5107–5115.
https://doi.org/10.1007/s12206-014-1133-z.
[20] J.-F. Hochrein, M. Trübswetter, M. Otto, K. Stahl, Direct flank geometry calculation for face gears, Forsch Ingenieurwes. 86 (2022) 617–625. https://doi.org/10.1007/s10010-021-00505-7.
[21] Y. Wang, L. Hou, Z. Lan, C. Wu, Q. Lv, X. Zhao, A precision generating hobbing method for face-gear based on worm hob, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 231 (2017) 1057–1071. https://doi.org/10.1177/0954406216631373.
[22] W. Sheng, J. Zhao, Z. Li, H. Zhang, R. Zhu, Geometric Design of a Face Gear Drive with Low Sliding Ratio, Applied Sciences. 12 (2022) 2936.
https://doi.org/10.3390/app12062936.
[23] E. Guo, R. Hong, X. Huang, C. Fang, A correction method for power skiving of cylindrical gears lead modification, J Mech Sci Technol. 29 (2015) 4379–4386.
https://doi.org/10.1007/s12206-015-0936-x.
[24] Y.-P. Shih, Y.-J. Li, A Novel Method for Producing a Conical Skiving Tool With Error-Free Flank Faces for Internal Gear Manufacture, Journal of Mechanical Design. 140 (2018) 043302.
https://doi.org/10.1115/1.4038567.
[25] E. Guo, R. Hong, X. Huang, C. Fang, A novel power skiving method using the common shaper cutter, Int J Adv Manuf Technol. 83 (2016) 157–165.
https://doi.org/10.1007/s00170-015-7559-3.
[26] T.-T. Luu, Y.-R. Wu, A novel correction method to attain even grinding allowance in CNC gear skiving process, Mechanism and Machine Theory. 171 (2022) 104771.
https://doi.org/10.1016/j.mechmachtheory.2022.104771.
[27] C.-Y. Tsai, Power-skiving tool design method for interference-free involute internal gear cutting, Mechanism and Machine Theory. 164 (2021) 104396.
https://doi.org/10.1016/j.mechmachtheory.2021.104396.
[28] T.-T. Luu, Y.-R. Wu, A novel approach to attain tooth flanks with variable pressure and helical angles utilizing the same cutter in the CNC gear skiving process, Int J Adv Manuf Technol. 123 (2022) 875–902. https://doi.org/10.1007/s00170-022-10220-4.
[29] Z. Guo, R. Xie, W. Guo, W. Han, F. Gao, Y. Zhang, A Novel Method for Improving the Skiving Accuracy of Gears with Profile and Lead Modifications, Machines. 11 (2023) 87. https://doi.org/10.3390/machines11010087.
[30] S. Mo, S. Wang, B. Luo, H. Bao, G. Cen, Y. Huang, Research on the skiving technology of face gear, Int J Adv Manuf Technol. 121 (2022) 5181–5196.
https://doi.org/10.1007/s00170-022-09663-6.
[31] Z. Han, C. Jiang, X. Deng, Machining and meshing analysis of face gears by power skiving, JAMDSM. 16 (2022) JAMDSM0002–JAMDSM0002.
https://doi.org/10.1299/jamdsm.2022jamdsm0002.
[32] H. Guo, T. Ma, S. Zhang, N. Zhao, A. Fuentes-Aznar, Computerized generation and surface deviation correction of face gear drives generated by skiving, Mechanism and Machine Theory. 173 (2022) 104839.
https://doi.org/10.1016/j.mechmachtheory.2022.104839.
[33] S. Mo, S. Wang, B. Luo, Z. Liu, G. Cen, Y. Huang, Machining principle and cutter design of face gear skiving, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 237 (2023) 468–480.
https://doi.org/10.1177/09544054221101772.
[34] Bevel gear classification, tolerances, and measuring methods, American Gear Manufacturers Association, Alexandria, Va., 2001.
[35] V.-Q. Tran, Y.-R. Wu, A novel method for closed-loop topology modification of helical gears using internal-meshing gear honing, Mechanism and Machine Theory. 145 (2020) 103691. https://doi.org/10.1016/j.mechmachtheory.2019.103691. |