參考文獻 |
1.賴子邨譯, "三次元量床量測之基本及要素", 機械月刊第二十一卷第三期, pp. 421-425 (1995).
2.楊義雄譯, "三次元量測儀之機能及基本操作", 機械月刊第二十一卷第一期, pp. 138-142 (1995).
3.賴子邨譯, "如何使用三次元量測儀", 機械月刊第二十一卷第一期, pp. 143-146 (1995).
4.M. A. Fugelso and R. R. Lindeke, "Finding the best fit centerline of cylinders with interrupted circumferences on polar CMM", Measurement, Vol. 18, No. 3, pp. 139-144 (1996).
4.M. A. Fugelso and R. R. Lindeke, "Finding the best fit centerline of cylinders with interrupted circumferences on polar CMM", Measurement, Vol. 18, No. 3, pp. 139-144 (1996).
6.J. B. Gou, Y. X. Chu and Z. X. Li, "A geometric theory of form, profile, and orientation tolerances", Precision Engineering 23, pp. 79-93 (1999).
7.范光照, "使用三次元量測儀做自動化尺寸檢驗", 機械月刊第二十卷第二期, pp. 150-154 (1994).
8.姚宏宗,陳信全,陳奎伍, "電腦輔助三次元量測",機械月刊第二十二卷第二期, pp. 173-184 (1996).
9.S. Kweon and D J Medeiros, "Part orientations for CMM inspection using dimensioned visibility maps", Computer-Aided Design, Vol. 30, No.9, pp. 741-749(1998).
9.S. Kweon and D J Medeiros, "Part orientations for CMM inspection using dimensioned visibility maps", Computer-Aided Design, Vol. 30, No.9, pp. 741-749(1998).
11.W. G. Weakers and P. H. J. Schellekens, "Compensation for dynamic errors of coordinate measuring machines", Measurement, Vol. 20, No. 3, pp. 197-209 (1997).
12.G. Zhang, "Error compensation of coordinate measuring machines", Annals of the CIRP, 34, pp. 445-448 (1985).
13.張國雄, "三次元量測機的誤差補償", 機械月刊第二十卷第二期, pp. 132-137 (1994).
13.張國雄, "三次元量測機的誤差補償", 機械月刊第二十卷第二期, pp. 132-137 (1994).
15.P. A. Cauchick-Miguel and T. G. King, "Factors which influence CMM touch trigger probe performance", Int. J. Mash. Tools Manufact., Vol. 38, No.4, p368-374 (1998).
16.P. C. Miguel, T. King and A. Abackerli, "A review on methods for probe performance verification", Measurement Vol. 23, pp. 15-33 (1998).
17.K. Busch, H. Kunzmann and F. Waldele, "Calibration of coordinate measuring machines", Precision Engineering, Vol. 7, No3, pp. 139-144 (1985).
18.溫光溥, "三次元量測儀精度評估及校正",機械工業雜誌, 82年6月號, pp. 289-296 (1993).
19.S.-H F. Chuang and C. Z. Kao, "One-side arc approximation of B-spline curves for interference-free offsetting" ,Computer-Aided Design Vol. 3, pp. 1111-118 (1999).
20.L. A. Piegl and W. Tiller, "Applications Computing offsets of NURBS curves and surfaces", Computer-Aided Design Vol. 31, pp. 147-156 (1999).
21.I. Zeid , CAD/CAM Theory and Practice, McGraw-Hill, Inc, pp.310 (1991).
22.B. K. Choi, Surface Modeling for CAD/CAM, Elsevier Science Publishers B.V., pp. 263 (1991).
22.B. K. Choi, Surface Modeling for CAD/CAM, Elsevier Science Publishers B.V., pp. 263 (1991).
24.C. Menq and F. L. Chen, "Curve and surface approximation from CMM measurement data", Computers and Industrial Engineering, Vol.30 No.2, pp. 211-226(1995).
25.S. H. SUH, S. K. Lee and J. J. Lee, "Compensating probe radius in free surface modelling with CMM: Simulation and experiment", INT. J. PROD. RES., Vol. 34, No. 2, pp. 507-523(1996).
25.S. H. SUH, S. K. Lee and J. J. Lee, "Compensating probe radius in free surface modelling with CMM: Simulation and experiment", INT. J. PROD. RES., Vol. 34, No. 2, pp. 507-523(1996).
27.John A. Bosxh, Coordinate measuring machines and system, Marcel Dekker, Inc. (1995).
28.王亮,艾玲, "也谈三坐标测量机测量叶型的方法", 量测技术, No.1, pp. 35-37 (1997).
29.劉奎江, ?-D葉片自動量測規劃及逆向工程之研究", 中央大學機械工程研究所碩士論文 (1998). |