以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：19

、訪客IP：3.144.143.31

姓名	葉建志(Jian-Zhe Yeh)  查詢紙本館藏	畢業系所	機械工程學系
論文名稱	轉注成形充填過程之巨微觀流數值模擬
相關論文	★ 迴轉式壓縮機泵浦吐出口閥片厚度對性能影響之研究 ★ 鬆弛時間與動態接觸角對旋塗不穩定的影響 ★ 電化學製作針錐微電極之製程研究與分析 ★ 蚶線形滑轉板轉子引擎設計與實作 ★ 利用視流法分析金屬射出成形脫脂製程中滲透度與毛細壓力之關係 ★ 應用離心法實驗探求多孔介質飽和度與毛細力之關係 ★ 利用網絡模型數值模擬粉末射出成形製程毛細吸附脫脂機制 ★ 二維熱流效應對電化學加工反求工具形狀之分析 ★ 金屬粉末射出成形製程中胚體毛細吸附脫脂之數值模擬與實驗分析 ★ 飽和度對金屬射出成形製程中毛細吸附脫脂之影響 ★ 轉注成型充填過程巨微觀流交界面之數值模擬 ★ 轉注成型充填過程中邊界效應之數值模擬 ★ 鈦合金整流板電化學加工技術研發 ★ 射出/壓縮轉注成型充填階段中流場特性之分析 ★ 脈衝電化學加工過程中氣泡觀測與分析 ★ 金屬粉末射出成型二維毛細吸附脫脂及飽和度之研究
檔案	[Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   [檢視]  [下載] 本電子論文使用權限為同意立即開放。 已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。 請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。
關鍵字(中)	★ 多孔性介質 ★ 毛細數 ★ 滲透度 ★ 達西定律 ★ 蒙地卡羅法	關鍵字(英)
論文目次	第一章、序論…………………………………………………………… 1-1 前言………………………………………………………… 1-2 文獻回顧…………………………………………………… 1-3 研究方向…………………………………………………… 第二章、理論模式………………………………………………………… 2-1達西定律…………………………………………………… 2-2有限擴散聚集……………………………………………… 2-3微觀結構之物理模式……………………………………… 2-4微觀結構之位移模式……………………………………… 2-5流動粒子流動強度計算方式……………………………… 2-6空孔度……………………………………………………… 2-7等效滲透深度……………………………………………… 2-8滲透度……………………………………………………… 2-9無因次參數………………………………………………… 2-10氣泡壓力計算準則………………………………………… 第三章、數值方法………………………………………………………… 3-1蒙地卡羅法 ………………………………………………… 3-2網絡模型 …………………………………………………… 3-3機率取決方式 ……………………………………………… 第四章、結果與討論……………………………………………………… 4-1隔點獨立性 ………………………………………………… 4-2單一均勻滲透度之流場特性分析 ………………………… 4-3不同滲透度之流場特性分析 ……………………………… 4-4連續纖維束之流場特性分析 ……………………………… 4-5無因次參數 ………………………………………………… 第五章、結論……………………………………………………………… 第六章、參考文獻………………………………………………………… 表…………………………………………………………………………… 圖……………………………………………………………………………
參考文獻	[3]K. N. Kendall and C. D. Rudd , “Flow and Cure Phenemena in Liquid Composite Molding “ ,Polymer Composites , Vol. 15 , No. 5 , 334-347 (1994). [4]T. Staffan Lundstrom and B. Rikard Gebart , “Influence From Process Parameters on Void Formation in Resin Transfer Molding” , Polymer Composites , Vol. 15 , No. 1 ,25-33 (1994). [5]G. R. Palmese and V. M. Karbhari , “Effects of Sizing on Microscopic Flow in Resin Transfer Molding” , Polymer Composites , Vol. 16 , No. 4 ,313-318 (1995). [5]G. R. Palmese and V. M. Karbhari , “Effects of Sizing on Microscopic Flow in Resin Transfer Molding” , Polymer Composites , Vol. 16 , No. 4 ,313-318 (1995). [7]張智淵 , 轉注成型充填過程中氣泡形成之數值模擬 , 國立中央大學機械工程研究所博士論文 (1997). [8]C. Lekakou and M. G. Bader , “Mathematical Modelling of Macro-and Micro-Infiltration in Resin Transfer Moulding (Rtm) “ ,Composite Part A 29a , 29-37 (1998). [9]G. P. Androutsopoulos and R. Mann , “ Evaluation of Mercury Porosimeter Experiments Using A Network Structure Model “ , Chemical Engineering Science Vol. 34 , 1203-1212 (1978). [10]Masako Maejima , “Applying Capillarity to Estimation of Space Structure of Fabrics” , Manuscript Receives February 18 ,Accepted June 17 , 427-434 (1982). [10]Masako Maejima , “Applying Capillarity to Estimation of Space Structure of Fabrics” , Manuscript Receives February 18 ,Accepted June 17 , 427-434 (1982). [12]R. Lenormand , E. Touboul , and C. Zarcone. “Numerical Models and Experiments on Immiscible Displacement in Porous Media “ , J. Fluid Mech., :165-187 (1988). [12]R. Lenormand , E. Touboul , and C. Zarcone. “Numerical Models and Experiments on Immiscible Displacement in Porous Media “ , J. Fluid Mech., :165-187 (1988). [12]R. Lenormand , E. Touboul , and C. Zarcone. “Numerical Models and Experiments on Immiscible Displacement in Porous Media “ , J. Fluid Mech., :165-187 (1988). [15]Mathews T. , Matthews G.P. and Huggett S. “ Estimating Particle Size Distributions from A Network Model of Porous Media” , Powder Technology , Vol 104. , 113-198 (1999). [16]Albert W. Chan and Roger J. Morgan , “Tow Impregnation During Resin Transfer Molding of Bi-Directional Nonwoven Fabrics” , Polymer Composites , Vol. 14 , No. 4 , 335-340 (1993). [17]Frederick R. Phelan Jr. , “A Generalized Model for The Transverse Fluid Permeability in Unidirectional Fibrous Media” , Polymer Composites , Vol. 17 , No. 2 , 222-230 (1996). [17]Frederick R. Phelan Jr. , “A Generalized Model for The Transverse Fluid Permeability in Unidirectional Fibrous Media” , Polymer Composites , Vol. 17 , No. 2 , 222-230 (1996). [17]Frederick R. Phelan Jr. , “A Generalized Model for The Transverse Fluid Permeability in Unidirectional Fibrous Media” , Polymer Composites , Vol. 17 , No. 2 , 222-230 (1996). [20]D.G. Kiriakidis and G.H. Neale,”The Effects of Medium Thickness on The Island Size Distribution in Immiscible Displacement Flow in Porous Media” ,Chem. Eng. Comm., 127-134 (1993). [20]D.G. Kiriakidis and G.H. Neale,”The Effects of Medium Thickness on The Island Size Distribution in Immiscible Displacement Flow in Porous Media” ,Chem. Eng. Comm., 127-134 (1993). [22]Advani , S. G. , Bruschke , M. V. And Parnas , “Flow and Rheology in Polymeric Composites Manufacturing “ , Elsevier Amsterdam , Chap. 12 , 465-516 (1994). [22]Advani , S. G. , Bruschke , M. V. And Parnas , “Flow and Rheology in Polymeric Composites Manufacturing “ , Elsevier Amsterdam , Chap. 12 , 465-516 (1994). [22]Advani , S. G. , Bruschke , M. V. And Parnas , “Flow and Rheology in Polymeric Composites Manufacturing “ , Elsevier Amsterdam , Chap. 12 , 465-516 (1994). [22]Advani , S. G. , Bruschke , M. V. And Parnas , “Flow and Rheology in Polymeric Composites Manufacturing “ , Elsevier Amsterdam , Chap. 12 , 465-516 (1994). [26]K. L. Han , L. J. Lee and M. Liou , “Fiber Mat Deformation in Liquid Composite Molding. I: Experiment Analysis” , Polymer Composites ,14 , 144-150 (1993). [27]W. B. Young and C. W. Tseng , “Study on The Pre-Heated Temperatures and Injection Pressures of The Rtm Process” , J. of Reinforced Plastics and Composites , 13 , 467-482 (1994). [28]K. L. Han , L. J. Lee and M. Liou , “Fiber Mat Deformation in Liquid Composite Molding. Ii: Modeling” , Polymer Composites ,14 , 151-160 (1993). [28]K. L. Han , L. J. Lee and M. Liou , “Fiber Mat Deformation in Liquid Composite Molding. Ii: Modeling” , Polymer Composites ,14 , 151-160 (1993). [30]C. J. Wu and L. W. Hourng , “Permeable Boundary Condition For Numerical Simulation in Rein Transfer Molding “ , Polymer Engineering and Science , 35 , 1272-1281 (1995). [31]Frederick M. Fowkes , “Role of Surface Agents in Wetting” ,Shell Development Company, Emeryville Received July 22, Vol. 57 , 98-103 (1952). [32]Richard Chandler,Jole Koplik,Kenneth Lerman Andjorge F. Willemsen, ”Capillary Displacement and Percolation in Porous Media” , J. Fluid Mech.,Vol. 119,Pp. 249-267 (1982). [33]L. Paterson , “ Diffusion Limited Aggregation and Two-Fluid Displacements in Porous Media “ , Phys. Rev. Lett. , 1621-1624 (1981). [34]T. A. Witten Jr. and L. M. Sander , “ Diffusion Limited Aggregation , A Kinetic Critical Phenomenon “ , Phys. Rev. Lett. , 1400-1403 (1981). [35]F. Boger , J. Feder and T. Jissang , “ Dynamics of Viscous Fingerinf Fravtals in Porous Media “ , Phys. Rev. A , 318-324 (1987). [36]L. N. Shchur and S. S. Kosyakov , “ Probability of Incipient Spanning Clusters in Critical Two-Dimensional Percolation “ , Nuclear Physics B , 664-666 (1998). [37]曾敦睦 , 應用蒙地卡羅法模擬及實驗觀測多孔性介質毛細位移之現象 , 國立中央大學機械工程學系碩士論文 (1998). [38]J. Bear , “Dynamics of Fluids in Porous Media” , Dover Publication , New Youk (1972). [39]F. A. L. Dullien , “Porous Media Fluid Transport and Pore Structure” , Academic Press , New York (1979). [40]P. G. De Gennes, “Wetting:Static and Dynamics”,Reviews of Modern Physics , 57 , Part1 , 827-863 (1985). [41]P. G. De Gennes, “Dynamic Capillary Pressure in Porous Media” , Europhysics Letters , 5 , 689-691 (1988). [42]J. Feder , “Flow in Porous Media” , Lecture Notes , Physics Dept , University of Oslo (1995). [43]L. Paterson , “Diffusion-Limited Aggregation and Two-Fluid Displacements in Porous Media “ , Phys. Rev. Lett., : 1621-1624 (1984). [44]E. W. Washburn , “The Dynamics of Capillary Flow” , Phys. Rev. , 273-283 (1921). [45]廖致欽 , 轉注成型之滲透率的量測與流場觀察 , 國立中央大學機械工程學系碩士論文 (1994). [46]B. K. Lograsso , R. M. German , “Thermal Debinding of Injection Molded Powder Compacts” , Pmi Vol. 22, No.1 (1990). [47]張修銘 ,轉注成型製程中氣泡形成機制之可視化探討 , 國立中央大學機械工程學系碩士論文 (1997). [48]洪明宏 , 轉注射出成型製程中氣泡消長機制之分析 , 國立中央大學機械工程學系碩士論文 (1998). [49]Q.P.V. Fontana , “Viscosity:Thermal History Treatment in Resin Transfer Moulding Process Modelling” , Composite Parta. 29a , 153-158 (1998).
指導教授	洪勵吾(Lih-Wu Hourng)	審核日期	2000-6-28
推文	facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu
網路書籤	Google bookmarks   del.icio.us   hemidemi   myshare