參考文獻 |
[1] P. T. Houldcroft, Welding Process Technology, New York: Cambridge University Press, 1977.
[2] Larry Jeffus, Welding: Principles and Applications, Delmar Publishers, 1999.
[3] Dave Smith, Welding Skills and Technology, McGraw-Hill Book Co., 1989.
[4] B.C. Howard, Modern Welding Technology, Prentice-Hall, Inc. Englewood Cliffs, 1979.
[5] L. X. Wang, Adaptive Fuzzy Systems and Control: Design and Stability Analysis, Prentice-Hall international Editions, 1994.
[6] T. Takagi and M. Sugeno, “Fuzzy Identification of Systems and Its Applications to Modeling and Control,” IEEE Trans. Systems, Man, Cybernet. Smc-15, Vol. 1, pp. 116-132, 1998.
[7] M. A. Austin, “Real-time Multi-processing Fuzzy Logic Adaptive Control Gas Tungsten Arc Welding System,” Proceedings of the WPDRTS IEEE, pp. 139-143, 1996.
[8] L. X. Wang, A Course in Fuzzy Systems and Control, Prentice-Hall, Inc. Englewood Cliffs, 1997.
[9] D. H. Kim, H. S. Kim, J. M. Kim, C. Y. Won and S. C. Kim “Induction Motor Servo System Using Variable Structure Control with Fuzzy Sliding Surface,” Industrial Electronics, Control, and Instrumentation, 1996., Proceedings of the 1996 IEEE IECON 22nd International Conference, Vol. 2, pp.521-528, 1996.
[10] F. J. Lin, K. K. Shyu and Y. S. Lin, ” Variable Structure Adaptive Control for PM Synchronous Servo Motor Drive,” IEE Proc. Electr. Power Appl., Vol. 146, No. 2, pp. 173-185, March 1999.
[11] G. R. Yu, M. H. Tseng and Y. K. Lin, “Optimal Positioning Control of a DC Servo Motor Using Sliding Mode,” Control Applications, 2004. Proceedings of the 2004 IEEE International Conference, Vol. 1, pp. 272-277, 2004.
[12] C. Canudas de Wit, P. Noe1, A. Aubin, B. Brogliato and P. Drevet, “Adaptive Friction Compensation in Robot Manipulators: Low-Velocities,” IEEE International Conference in Robotics and Automation, Scottsdale, Arizona, U.S. A, pp. 1352-1357, 1989.
[13] C. C. de. Wit, H. Olsson, K. J. and P. Lischinsky, “A New Model for Control of Systems with Friction,” IEEE Transactions on Automatic Control, Vol. 40, No. 3, pp. 419-425, March 1995.
[14] C. Canudas de Wit and P. Lischinsky “Adaptive Compensation with Partially Known Dynamic Friction Model,” International Journal of Adaptive Control and Signal Processing, Vol. 11, pp. 65-80, 1997.
[15] Y. M. Zhang, E. Liguo and B.L. Walcott, “Interval Model Based Control of Gas Metal Arc Welding,” IEEE International Conference, American Control Conference, Vol. 3, pp. 1752-1756, 1998.
[16] P. Verdelho, P. M. Silva, E. Margato, J. Esteves, “An Electronic Welder Control Circuit,” IEEE International Conference, Industrial Electronics Society, Vol. 2, pp. 612-617, 1998.
[17] H. Yamamoto, “The Development of Welding Control System for Spatter Reduction,” Welding International, Vol. 4, No. 5, pp. 398-403, 1990.
[18] M. Abdelrahman, “Feedback Linearization Control of Current and Arc Length in GMAW Systems,” IEEE International Conference, Vol. 3, pp. 1757-1761, 1998.
[19] Y. M. Chae and G. H. Choe, “A New Instantaneous Output Current Control Method for Inverter Arc Welding Machine,” IEEE, PRCS’99 Proceeding, Vol. 1, pp. 521-528, 1999.
[20] B. K Bose, “Sliding Mode Control of Induction Motor,” IEEE/IAS Conference Record, pp. 479-486, 1985.
[21] V. I. Utkin, “Sliding Mode Control Design Principles and Applications to Electric Devices,” IEEE Trans. Ind. Electronic, Vol. 40, No. 1, pp. 23-36, 1993.
[22] L. I. Slotine, Applied Nonlinear Control, Prentice-Hall, Inc. Englewood Cliffs, 1991.
[23] S. L. Chiu and K. K. Shyu, “Novel Sliding Mode Controller for Synchronous Motor Drive,” IEEE Trans. on Aerospace and Electronic System, Vol. 34, No. 2, April, pp. 532-542, 1998.
[24] K. P. Park and J. J. Lee, “Adaptive Sliding Mode Controller with Monotonically Nonincreasing Gain for Nonlinear Uncertain Systems,” IEEE International Workshop on VSS '96, Proceedings, pp. 139-142, 1996.
[25] R. J. Wai, C. H. Lin and F. J. Lin, "Adaptive Sliding-mode Control for Motor-toggle Servomechanism," IEEE Conf. on Power Electronics Specialists, Vol. 3, pp. 1093-1099, June, 2000.
[26] P. Liu and L. Hao, "Vector Control-based Speed Sensorless Control of Induction Motors Using Sliding-Mode Controller," The Sixth World Congress on Intelligent Control and Automation, Vol. 1, pp. 1942-1946, 2006.
[27] A. A. Hassan, Y. S. Mohamed and E. G. Shehata, "Cascade Sliding Mode Torque Control of a Permanent Magnet Synchronous Motor," IEEE International Conf. on Industrial Technology, pp. 465-470, December 2006.
[28] V. I. Utkin and A. Sabanovic, "Sliding Modes Applications in Power Electronics and Motion Control Systems," Proceeding of the IEEE International Symposium on Industrial Electronics, Vol. 1, pp. 12-16, July 1996.
[29] V. I. Utkin, "Sliding Mode Control in Dynamic Systems," Proceedings of the 32nd IEEE Conf. on Decision and Control, Vol. 3, pp 2446-2451, 1993.
[30] G. Bartolini, A. Ferrara and V. I. Utkin, "Design of Discrete-time Adaptive Sliding Mode Control," Proceedings of the 31st IEEE Conf. on Decision and Control, Vol. 2, pp. 2387-2391, December 1992.
[31] L.A. Zadeh, "Fuzzy Logic = Computing with Words," IEEE Transactions on Fuzzy Systems, Vol. 4, pp. 103-111, May 1996.
[32] L.A. Zadeh, "Fuzzy Logic and The Calculus of Fuzzy If-then Rules," Twenty-Second International Symposium on Multiple-Valued Logic, pp. 480, May 1992.
[33] H. J. Zimmermann, Fuzzy Set Theory and Its Applications, Edition, Kluwer Academic Publishers, 1996.
[34] E. H. Mamdani, “Application of Fuzzy Algorithms for Control of Simple Dynamic Plant,” Proc. IEE, Vol. 121, No. 12, pp. 1585-1588, 1974.
[35] E.H. Mamdani, "Twenty Years of Fuzzy Control: Experiences Gained and Lessons Learnt", Second IEEE International Conf. on Fuzzy Systems, Vol. 1, pp. 339-344, 1993.
[36] E.H. Mamdani, H.J. Efstathiou and K. Sugiyama, "Developments in Fuzzy Logic Control," The 23rd IEEE Conf. on Decision and Control, Vol. 23, pp. 888-893, 1984.
[37] M. C. Shih and C. S. Lu, “Fuzzy Sliding Mode Position Control of a Ball Screw Driven by Pneumatic Servomotor,” Mechatronics, Vol. 5, No. 4, pp. 421-431, 1985.
[38] A. Rubaai, D. Ricketts and M.D. Kankam, "Experimental Evaluation of a Fuzzy Logic-based Controller for High Performance Brushless DC Motor Drives," Industry Applications Conference Record of the 2000 IEEE, Vol. 2, pp. 1299-1305, 2000.
[39] A. Rubaai, D. Ricketts and M.D. Kankam,"Laboratory Implementation of a Microprocessor-based Fuzzy Logic Tracking Controller for Motion Controls and Drives," IEEE Trans. on Industry Applications, Vol. 38, pp. 448-456, 2002.
[40] R. Palm, “Sliding Mode Fuzzy Control,” IEEE International Conf. on Fuzzy Systems FUZZ-IEEE ' 92, San Diego Proceeding, pp. 519-526, 1992.
[41] R. Palm and D. Driankov, "Fuzzy inputs," Proceedings of the Third IEEE Conference on Fuzzy Systems, pp. 756-765, June 1994.
[42] R.G. Berstecher, R. Palm and H.D. Unbehauen, "An Adaptive Fuzzy Sliding-mode Controller," IEEE Transactions on Industrial Electronics, Vol. 48, pp. 18-31, 2001.
[43] L. X. Wang, “Stable Adaptive Fuzzy Control of Nonlinear Systems,” IEEE Trans. Fuzzy Syst., Vol. 1, pp. 146-155, May 1993.
[44] G. C. Hwang and S. C. Lin, “A Stability Approach to Fuzzy Control Design for Nonlinear Systems,” Int. J. Fuzzy Sets and Systems, Vol. 48, pp. 279-287, 1992.
[45] S. G. Tzafestas and G. G. Rigatos, “Design and Stability Analysis of a New Sliding-mode Fuzzy Logic Controller of Reduced Complexity,” Machine Intelligence and Robotic Control, Vol. 1, No. 1, pp. 27-41, 1999.
[46] R. F. Fung, K. W. Chen and J. Y. Yeh, “Fuzzy Sliding Mode Controlled Slider-crank Mechanism Using a PM Synchronous Servo Motor Drive,” Int. .J Mechanical Sci., Vol. 41, pp. 337-355, 1999.
[47] C. M. Lin, T. Y. Chen, W. Z. Fan and Y. F. Lee, "Adaptive Fuzzy Sliding Mode Control for a Two-link Robot," IEEE International Conf. on Robotics and Biomimetics, pp. 581-586, 2005.
[48] C. C. Kung, T. Y. Kao and T. H. Chen, "Adaptive Fuzzy Sliding Mode Controller Design," Proceedings of the 2002 IEEE International Conf. on Fuzzy Systems, Vol. 1, pp. 674-679, 2002.
[49] B. Yoo, S. Jeoung, K. Im, I. So and W. Ham, "Adaptive Fuzzy Sliding Mode Control of Nonlinear System: The First Control Scheme," Proceedings of the 1996 IEEE IECON 22nd International Conf. on Industrial Electronics, Control, and Instrumentation, Vol. 1, pp. 590-595, 1996.
[50] S. Jeoung, J. Han, K. Im, W. Ham and B. Yoo,"Adaptive Fuzzy Sliding Mode Control of Nonlinear System: The Second Control Scheme," Proceedings of the 1996 IEEE IECON 22nd International Conf. on Industrial Electronics, Control, and Instrumentation, Vol. 1, pp. 269-274, 1996.
[51] B. J. Choi, S. W. Kwak and B. K. Kim, “Design of a Single-input Fuzzy Logic Controller and Its Properties,” Fuzzy Sets and Systems, Vol. 106, pp. 299-308, 1999.
[52] B. J. Choi, S. W. Kwak and B. K. Kim, "Design and Stability Analysis of Single-input Fuzzy Logic Controller," IEEE Transactions on Systems, Man and Cybernetics, Vol. 30, pp. 303-309, April 2000.
[53] S.M. Ayob, Z. Salam and N.A. Azli, "Simple PI Fuzzy Logic Controller Applied in DC-AC Converter," IEEE International Power and Energy Conference, pp. 393-398, 2006.
[54] S. Y. Chen, F. M. Yu and H. Y. Chung, “Decoupled Fuzzy Controller Design with Single-input Fuzzy Logic,” Fuzzy Sets and Systems, Vol. 129, pp. 335-342, 2002.
[55] V. I. Utkin, “Variable Structure Systems with Sliding Modes,” IEEE Trans. Automat. Control, Vol. 22, pp. 212-222, 1977.
[56] S. Y. Yi and M. J. Chung, “Robustness of Fuzzy Logic Control for an Uncertain Dynamic System,” IEEE Transaction on Fuzzy Systems, Vol. 6, No. 2, pp. 216-225, May 1998.
[57] S. C. Lin and Y. Y. Chen, “Design of Adaptive Fuzzy Sliding Mode for Nonlinear System Control,” IEEE Int. Conf. on Fuzzy Systems, Orlando, pp. 35-39, 1994.
[58] L. X. Wang, “Stable Adaptive Fuzzy Control of Nonlinear System,” IEEE Transaction on Fuzzy Systems, Vol. 1, No. 2, pp. 146-155, May 1993.
[59] T. Yu and D. Velez-Diaz, "Robust Fuzzy Control for a Class of Nonlinear Systems with Uncertainty," Proceedings of the 41st IEEE Conference on Decision and Control, Vol. 1, pp. 179-184, 2002.
[60] D. A. Haessig and B. Friedland, “On The Modeling and Simulation of Friction,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 113, pp. 354-362, 1991.
[61] B. Armstrong-Helouvry, P. Dupont and C. C. de Wit, “A Survey of Models, Analysis Tools and Compensation Methods for The Control of Machines with Friction,” Automatica, Vol. 30, No. 7, pp. 1083-1138, 1994.
[62] B. Friedland and S. Mentzelopoulou, “On Estimation of Dynamic Friction,” Proceedings of the 32nd Conference on Decision and Control, pp. 1919-1924, December 1993.
[63] G. Song, Y. Wang, L. Cai and R. W. Longman, “A Sliding-mode Based Smooth Adaptive Robust Controller for Friction Compensation,” Proceedings of the American Control Conference, pp. 1382-1386, June 1995.
[64] U. Itkis, Control Systems of Variable Structure, New York, Wiley. 1976.
[65] V. I. Utkin, J. Guldncr and J. Shi, Sliding Mode Control in Electromechanical Systems, Taylor & Francis, 1999.
[66] K. K. D. Young, “A Variable Structure Model Following Control Design for Robotic Application,” IEEE Trans. Robot. Automat., Vol. 4, pp. 556-561, October 1988.
[67] L. Guzzella and H. P. Geering, “Model Following Variable Structure Control for a Class of Uncertain Mechanical Systems,” Proc. 25th IEEE Conf. Decision Contr., Vol. 3, pp. 312-316, December 1986.
[68] T. L. Chem and J. Chang, ”DSP-based Induction Motor Drives Using Integral Variable Structure Model Following Control Approach,” IEEE International Electric Machines and Drives Conference Record, pp. 9.1-9.3.
[69] S. Singh, “Adaptive Model Following Control of Nonlinear Robotic Systems,” IEEE Transactions on Automatic Control, Vol. 30, No. 11, pp. 1099-1100, November 1985.
[70] James A. Pender, Welding, McGraw-Hill, 1968.
[71] M. I. Boulos, P. Fauchais and E. Pfender, Thermal Plasma, Fundamentals and Applications, Vol. 1, Plenum Press, 1994.
[72] C. J. Holslag, Arc Welding Handbook, McGraw-Hill, 1924.
[73] Leonard Koellhoffer, Shielded Metal Arc Welding, Wiley, 1983.
[74] 褚文和,SMAW焊接系統的動態與控制,國立中央大學,博士論文,民國93年。
[75] 胡繩蓀,現代弧焊電源及其控制--焊接工程師系列教程,機械工業出版社,北京市,中國,2007。
[76] 任廷春,弧焊電源--職業技術院校規劃教材,第二版,機械工業出版社,北京市,中國,2005。
[77] 潘際鑾,現代弧焊控制,機械工業出版社,北京市,中國,2000。
[78] 陳裕川,現代焊接生產實用手冊委員會,機械工業出版社,北京市,中國,2005。
[79] B. K. Bose, Power Electronics and AC Drives, Prentice-Hall, Inc, Englewood Cliffs, 1986.
[80] J. N. Juang, Applied System Identification, Prentice-Hall, Inc. Englewood Cliffs, 1994.
[81] 趙清風,控制之系統識別,初版,全華科技圖書股份有限公司,台北市,台灣,民國90年。
[82] L. Slotine, Applied Nonlinear Control, Prentice-Hall, Inc, Englewood Cliffs, 1991.
[83] J. T. Sponner, Stable Adaptive Control and Estimation for Nonlinear Systems – Neural and Fuzzy Approximator Techniques, Wiley, 2002.
[84] H. K. Khalil, Nonlinear Systems, Upper Saddle River, NJ: Prentice Hall, 1996.
[85] H. G. Kwatny and G. L. Blankenship, Nonlinear Control and Analytical Mechanics – A Computational Approach, ,2000.[86] E. M. Mamdani, “Application of Fuzzy Algorithms for Control of Simple Dynamic Plant,” Proc. IEE, Vol. 121, No. 12, pp. 1585-1588, 1974.
[87] L. A. Zadeh, Theory of Fuzzy Sets, Berkeley: Electronics Research Laboratory, College of Engineering, University of California, 1977.
[88] K. Araki, X. Chen, J. Chen, Y. Ishino and T. Mizuno, “Application of a Model Reference Fuzzy Adaptive Control to the Spot Welding System,” Proc. of SICE Annual Conference II, pp. 1139-1144, July, 1996.[89] S. C. Lin and Y. Y. Chen, “Design of Self-learning Fuzzy Sliding Mode Controllers Based on Genetic Algorithms,” Fuzzy Sets and Systems, pp. 139-153, 1997.
[90] X. Yu, Z. Man and B. Wu, “Design of Fuzzy Sliding-mode Control Systems,” Fuzzy Sets and Systems, Vol. 95, pp. 295-306, 1998.
[91] Y. C. Hsu, G. Chen, S. Tong and H. X. Li, “Intelligent Fuzzy Modeling and Adaptive Control for Nonlinear Systems,” Information Science, Vol. 153, pp. 217-236, 2003.
[92] M. Abdelrahman, “Feedback Linearization Control of Current and Arc Length in GMAW Systems,” IEEE International Conference, American Control Conference 3, pp. 1757-1761, 1998.
[93] Y. M. Chaec and G. H. Choe, et al., “A New Instantaneous Output Current Control Method for Inverter Arc Welding Machine,” IEEE PRCS’99 Records Vol. 1, pp. 521-528, 1999.
[94] R. N. Gasimov and A. Yazici, “A Nonlinear Programming Approach for The Sliding Mode Control Design,” Appl. Math Model, Vol. 29, pp. 1135-1148, 2005.
[95] 楊憲東,葉芳栢,線性與非線性控制理論,初版,全華科技圖書股份有限公司,台北市,台灣,民國86年。
[96] 自動控制工程手冊編輯小組,自動控制—中國電機工程師手冊第五篇,初版,中國電機工程學會,台灣,民國86年。
[97] C. Canudas de Wit, “A New Model for Control of Systems with Friction,” IEEE Transactions on Automatic Control, Vol. 40, No.3, pp. 419-425, 1995.
[98] R. A. DecArlo, S. H. Zak and G. P. Matthews, “Variable Structure Control of Nonlinear Multivariable Systems: A Tutorial,” Proc. IEEE, Vol. 76 No. 3, pp. 1209-1213, 1998.
[99] S. Hui and S. Zak, “Robust Control Synthesis for Uncertain/Nonlinear Dynamic Systems,” Automatica, Vol. 28, No. 2, pp. 289-298, 1999.
[100] B. Drazenovic, “The Invariance Condition in Variable Structure System,” Automatica, Vol. 12, No. 2, pp. 287-295, 1969. |