參考文獻 |
[1] W. Shockly, U. S. Patent NO. 2569347, 1951.
[2] H. Kroemer, “Theory of a Wide-Gap Emitter for Transistors,” proc. IRE, vol. 45, pp.1535, 1957.
[3] H. H. Berger, “Models for contacts to planar devices, “Solid-State Electron., vol. 15, pp.145-147, June. 1972.
[4] D. Costa, W. Liu, and J. S. Harris, Jr., “Direct extraction of the AlGaAs/GaAs heterojunction bipolar transistor small-signal equivalent circuit, “IEEE Trans. Electron Devices, vol. 38, pp. 2018–2024, Sept. 1991.
[5] W. Liu, Handbook of III-V heterojunction bipolar transistors. New York: Wiley, 1998.
[6] R. L. Pritchard, Electrical Characteristics of Transistors. New York: McGraw-Hill, 1967.
[7] C. T. Kirk, “A Theory of Transistor Cutoff Frequency (Ft) Falloff at High Current Densities, “IRE Trans. Electron Devices, pp.164. March 1962.
[1] R.L. Pritchard, “Transistor equivalent circuits,” Proceedings of the IEEE vol. 86, pp.150-162, Jan. 1998.
[2] E. A. Guillemin, Communication Networks, vol. II. New York: Wiley, 1935, ch. IV.
[3] H.H. Berger, “Models for contacts to planar devices,” Solid-State Electron., vol. 15, pp.145-147, June. 1972.
[4] D. Costa, W. Liu, and J.S. Harris, Jr., “Direct extraction of the AlGaAs/GaAs heterojunction bipolar transistor small-signal equivalent circuit,” IEEE Trans. Electron Devices, vol. 38, pp. 2018–2024, Sept. 1991.
[5] J.M.M. Rios, “A self-consistent method for complete small-signal parameter extraction of InP-based heterojunction bipolar transistors,” IEEE Trans. Microwave Theory Tech., vol. 45, pp.39- 45, Jan. 1997.
[6] R.L. Pritchard, Electrical Characteristics of Transistors. New York: McGraw-Hill, 1967.
[7] W. Liu, Handbook of III-V heterojunction bipolar transistors. New York: Wiley, 1998.
[8] Information About the Most Recent Model Descriptions, Source Code, and Documentation. [Online]. Available: http://www.semiconductors. Philips.com / Philips_Models
[9] H.S. Rhee, S. Lee, and B. R. Kim, “DC and AC current crowding effects model analysis in bipolar junction transistors using a new extraction method,” Solid State Electron., vol. 38, no. 1, pp. 31–35, 1995
[10] M. Ida, K. Kurishima, and N. Watanabe.,” Over 300 GHz fT and fmax InP/InGaAs double heterojunction bipolar transistors with a thin pseudomorphic base,”IEEE Trans. Electron Devices, vol. 23, pp. 694 – 696, Dec. 2002
[11] K. Washio, E. Ohue, R. Hayami, A. Kodama, H. Shimamoto, M. Miura, K. Oda, I. Suzumura, T. Tominari, and T. Hashimoto, “High-speed scaled-down self-aligned SEG SiGe HBTs,” IEEE Trans. Electron Devices, vol. 50, pp.2417 – 2424 , Dec. 2003.
[12] D. R. Pehlke and D. Pavlidis, “Evaluation of the factors determining HBT high-frequency performance by direct analysis of S-parameter data,” IEEE Trans. Microwave Theory Tech., vol. 40, pp. 2367–2373, Dec. 1992.
[13] Y. Gobert, P. J. Tasker, and K. H. Bachem, “A physical, yet simple, small-signal equivalent circuit for the heterojunction bipolar transistor,” IEEE Trns. Microwave Theory Tech., vol. 45, pp.149-153, Jan. 1997.
[14] S. Bousnina, P. Mandeville, A. B. Kouki, R. Surridge, and F. M. Ghannouchi, “Direct parameters-extraction method for HBT small-signal model,” IEEE Trns. Microwave Theory Tech., vol. 50, pp.529- 536, Feb. 2002.
[15] C. J. Wei and J. C. M. Huang, “Direct extraction of equivalent circuit parameters for heterojunction bipolar transistors,” IEEE Trans. Microwave Theory Tech., vol. 43, pp. 2035–2039, Sept. 1995.
[16] A. Samelis and D. Pavlidis, “DC to high-frequency HBT-model parameter evaluation using impedance block conditioned optimization,” IEEE Trans. Microwave Theory Tech., vol.45, pp.886–897, Jun. 1997
[17] M. S. Gupta,”Power gain in feedback amplifiers, a classic revisited ,” IEEE Trans. Microwave Theory Tech., vol. 40, pp.864–879, May. 1992
[1] P. J. Fish, Electronic Noise and Low Noise Design. New York McGraw-Hill, 1994.
[2] J.J. Liou, T.J. Jenkins, L.L. Liou, R. Neidhard, D.W. Barlage, R. Fitch, J.P. Barrette, M. Mack, C.A. Bozada, R.H.Y. Lee, R.W. Dettmer, and J.S. Sewell,” Bias, frequency, and area dependencies of high frequency noise in AlGaAs/GaAs HBT's, “ IEEE Trans. Electron Devices, vol. 43, pp.116-122, Jan.1996.
[3] M. Rudolph, R. Doerner, L. Klapproth, and P. Heymann, “An HBT noise model valid up to transit frequency, “ IEEE Trans. Electron Devices, vol. 20, pp.24-26 Jan. 1999,
[4] U. Basaran, N. Wieser, G. Feiler, and M. Berroth,” Small-signal and high-frequency noise modeling of SiGe HBTs,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 3, pp. 919- 928, March 2005.
[5] L. Escotte, J.-P. Roux, R. Plana, J. Graffeuil, and A. Gruhle, “Noise modeling of microwave heterojunction bipolar transistors,” IEEE Trans. Electron Devices, vol. 42, no. 5, pp.883-889, May 1995.
[6] D. Costa and J. S. Harris Jr., “Low-frequency noise properties of N-p-n AlGaAs/GaAs heterojunction bipolar transistors,” IEEE Trans. Electron Devices, vol. 39, p. 2383, 1992.
[7] G. Niu, ”Noise in SiGe HBT RF technology: physics, modeling, and circuit implications,” Proceedings of the IEEE, vol. 93, no. 9, pp.1583-1597, Sept. 2005.
[8] W.H. Fonger, “Noise in transistor”, in Noise in Electron Devices, Smullin and Hans, eds., New York: John Wiley and Sons, pp. 365-381,1959.
[9] A. McWhorter, “1/f noise and germanium surface properties,” in Semiconductor Surface Physics. Philadelphia, PA: Univ. of Pennsylvania Press, pp. 207–208. 1957.
[10] Yan Cui; Guofu Nui; Harame, D.L.;” An examination of bipolar transistor noise modelling and noise physics using microscopic noise simulation,” Proceedings of the Bipolar/BiCMOS Circuits and Technology Meeting, Sept. 2003 pp.225-228, 2003.
[11] A. Van der Ziel, “Proposed discrimination between 1/ f noise sources in transistors,” Solid State Electronics, vol. 25, no. 2, pp. 141-143, 1982.
[12] J.-H. Shin, J. Kim, Y. Chung, J. Lee, Y. Suh, K.H. Ahn, and B. Kim,” Low-frequency noise characterization of self-aligned AlGaAs-GaAs heterojunction bipolar transistors with a noise corner frequency below 3 kHz,” IEEE Trans. Microwave Theory Tech., vol.46, no.11, pp.1604-1613, Nov. 1998.
[13] G. Niu, J.D. Cressler, Z. Shiming, W.E. Ansley, C.S. Webster, and D.L Harame, “ An unified approach to RF and microwave noise parameter modeling in bipolar transistors,” IEEE Trans. Electron Devices, vol. 48, no.11, pp. 2568-2574, Nov. 2001.
[14] A. van der Ziel, “Theory of shot noise in junction diodes and junction transistors,” Proc. IRE, vol. 43, pp. 1639-1646, Nov. 1955.
[15] H. A. Haus and R. B. Adler, “Circuit Theory of Linear noisy Networks.” New York: Wiley, 1959.
[16] H. Hillbrand, and P. Russer,” An efficient method for computer aided noise analysis of linear amplifier networks,” IEEE Trans. Circuits and Systems, vol.23, no.4, pp.235-238, Apr. 1976.
[17] R.A. Pucel, and U.L. Rohde, “An exact expression for the noise resistance Rn for the Hawkins bipolar noise model,” IEEE Microwave and Guided Wave Letters, vol. 3, no.2, pp.35-37, Feb. 1993.
[18] G. Jianjun, L. Xiuping, W. Hong, and G. Boeck, ”Microwave noise modeling for InP-InGaAs HBTs,” IEEE Trans. Microwave Theory Tech., vol 52,no. 4, pp.1264-1272, Apr. 2004.
[19] C. Giuseppe, and M. Sannino, ” Computer-Aided Determination of Microwave Two-Port Noise Parameters,” IEEE Trans. Microwave Theory Tech., vol. 26, no.9, pp. 639-642, Sep. 1978.
[20] R. Plana, and L. Escotte,” Noise properties of micro-wave heterojunction bipolar transistors,” 1997 21st International Conference on Microelectronic Proceedings., vol. 1, pp.215-222 ,Sept. 1997
[21] H. Rothe , and W. Dahlke, ”Theory of noisy fourpoles,” Proc. IRE, vol.44, pp.811-818, June. 1956.
[22] H. Fukui,”The noise performance of microwave transistors,” IEEE Trans. Electron Devices, vol.13, no.3, pp.329-341, Mar. 1966.
[1] M.E. Kim, A.K. Oki, G.M. Gorman, D.K. Umemoto, and J.B. Camou,” GaAs heterojunction bipolar transistor device and IC technology for high-performance analog and microwave applications,” IEEE Trans. Microwave Theory Tech., vol. 37, no. 9, pp.1286 – 1303, Sept. 1989
[2] M.-C. Ho, R.A. Johnson, W.J. Ho, M.F. Chang, and P.M. Asbeck,” High-performance low-base-collector capacitance AlGaAs/GaAs heterojunction bipolar transistors fabricated by deep ion implantation,” IEEE Trans. Electron Lett. vol. 16, no.11, pp.512- 514, Nov. 1995.
[3] O. Berger,” GaAs HBTpower amplifier applications,” Bipolar/BiCMOS Circuits and Technology, 2004. Proceedings of the 2004 Meeting 13-14, pp.52-55, Sept. 2004.
[4] K. Kurishima” An analytic expression of fmax for HBTs,” IEEE Trans. Electron Devices, vol. 43, no. 12, pp.2074-2079, Dec. 1996.
[5] W. Liu, Handbook of III-V heterojunction bipolar transistors. New York: Wiley, 1998.
[6] K.W. Kobayashi, M. Nishimoto, L.T. Tran,W. Huei ,J.C. Cowles, T,R. Block,J.H. Elliott, B.R. Allen,A.K. Oki, and D.C. Streit,” A 44-GHz high IP3 InP-HBT amplifier with practical current reuse biasing,” IEEE Trans. Microwave Theory Tech. vol.46, no. 12, Part 2, pp.2541-2552, Dec. 1998.
[7] T. Iwai, S.Ohara, H. Yamada, Y. Yamaguchi, K. Imanishi, and K. Jeshin,” High efficiency and high linearity InGaP/GaAs HBT power amplifiers: matching techniques of source and load impedance to improve phase distortion and linearity,” IEEE Trans. Electron Devices, vol. 45, no. 6, pp.1196-1200, Jan. 1998.
[8] L.W. Nan, H.J. Wu, and J.A. Higgins,” AlGaAs/GaAs HBT linearity characteristics,” IEEE Trans. Microwave Theory Tech. vol. 42, no.10, pp.1845 – 1850, Oct. 1994.
[9] K. M. Chen; A. S. Peng, G. W. Huang, H.Y. Chen, S.Y. Huang, C.Y. Chang, H. C. Tseng, T.L. Hsu, and V. Liang,” Linearity and power characteristics of SiGe HBTs at high temperatures for RF applications,” IEEE Trans. Electron Devices, vol. 52, no.7, pp.1452-1458, Jul. 2005.
[10] K.W. Kobayashi, L.T. Tran, A.K. Oki, M.D. Lammert, and D.C. Streit, “Optimizing a GaAs HBT amplifier for maximum gain efficiency,” Electron. Letters, vol.32, no. 23, pp.2181 – 2183, Nov. 1996.
[11] S. Tanaka, Y. Amamiya, S. Murakami, H. Shimawaki, N. Goto, Y. Takayama, and K. Honjo,” Design considerations for millimeter-wave power HBTs based on gain performance analysis,” IEEE Trans. Electron Devices, vol. 45, no.1, pp.36-44, Jan. 1998.
[12] M. Iwamoto, C.P. Hutchinson, J.B. Scott, T.S. Low, M. Vaidyanathan, P.M. Asbeck, and D.C. D'Avanzo,” Optimum bias conditions for linear broad-band InGaP/GaAs HBT power amplifiers,” IEEE Trans. Microwave Theory Tech., vol. 50, no.12, pp.2954-2962, Dec. 2002.
[13] G.B. Gao, H. Morkoc, and M-C.F. Chang,” Heterojunction bipolar transistor design for power applications,” IEEE Trans. Electron Devices, vol.39, no.9, pp.987-1997, Sept. 1992.
[14] M. Iwamoto, P.M. Asbeck, T.S. Low, C.P. Hutchinson,J.B. Scott, A. Cognata, Q. Xiaohui , L.H. Camnitz,, and D.C. D'Avanzo,” Linearity characteristics of GaAs HBTs and the influence of collector design,” IEEE Trans. Microwave Theory Tech., vol.48, no. 12, pp.2377-2388, Dec. 2000.
[15] M. Iwamoto, T.S. Low, C.P. Hutchinson, J.B. Scott, A. Cognata, Q. Xiaohui, L.H. Camnitz, P.M. Asbeck,and D.C. D'Avanzo,” Influence of collector design on InGaP/GaAs HBT linearity,” IEEE MTT-S International Microwave Symposium Digest., vol.2, no.11, pp.757-760, June. 2000.
[16] M. Vaidyanathan, M. Iwamoto, L.E. Larson, P.S. Gudem, and P.M. Asbeck, P.M.;” A theory of high-frequency distortion in bipolar transistors,” IEEE Trans. Microwave Theory Tech., vol. 51, no.2, part 1, pp. 448-461, Feb. 2003.
[17] M.Y. Frankel, and D. Pavlidis,” Large-signal modeling and study of power saturation mechanisms in heterojunction bipolar transistors,” IEEE MTT-S International Microwave Symposium Digest, vol.1, pp. 127-130, June 1991.
[18] M.Y. Frankel, and D. Pavlidis,” An analysis of the large-signal characteristics of AlGaAs/GaAs heterojunction bipolar transistors,” IEEE Trans. Microwave Theory Tech., vol.40, no. 3, pp.465-474, Mar.1992 .
[19] M.C. Ho, and P.M. Asbeck , “Base-Collector Capacitance Reduction of AlGaAs/GaAs Heterojunction Bipolar Transistors by Deep Ion Implantation”, University of California, San Diego, 1995
[20] S.J. Pearton, “Ion Implantation for Isolation of Ⅲ-V Semiconductors, “Material Science Reports, Vol.4, p.315, 1982
[21] H. Kawai,T. Kobayashi, and K. Kaneko,”A collector-up AlGaAs/GaAs heterojunction bipolar transistor fabricated using three-stage MOCVD,” IEEE Trans. Electron Devices, vol. 9, no. 8 ,pp. 419-421, Aug. 1988 .
[22] A. Girardot, A. Henkel, S.L. Delage, M.A. DiForte-Poisson, E. Chartier, E. Floriot, S. Cassette, and P.A. Rolland, " High-performance collector-up InGaP/GaAs heterojunction bipolar transistor with Schottky contact," Electronics Letters ,vol. 35, no.8, pp. 670-672, Apr. 1999 .
[23] J. F.Zieglr, J.B. Biersack and U. Littmark, "The topping and Range of Ions in Solids, " Pergamon Press, New York, 1990
[24] S. Yamahata, Y. Matsuoka, and T. Ishibashi, "High fmax collector-up AlGaAs/GaAs heterojunction bipolar transistors with a heavily carbon-doped base fabricated using oxygen-ion implantation "IEEE Electron Device Letters , vol.14, no.4, pp.173-175, April 1993.
[1] N. Bovolon, R. Schultheis, J.E. Muller, and P. Zwicknagl,” Analysis of the short-term DC-current gain variation during high current density-low temperature stress of AlGaAs/GaAs heterojunction bipolar transistors,” IEEE Trans. Electron Devices ,vol. 47, no. 2, pp.274-281, Feb. 2000.
[2] Yang, Y.F.; Hsu, C.C.; Yang, E.S.,” Surface recombination current in InGaP/GaAs heterostructure-emitter bipolar transistors,” IEEE Trans. Electron Devices, vol. 41, no. 5, pp.643-647,May. 1994.
[3] S. Tiwari, D.J. Frank, and S.L. Wright, “Surface recombination current in GaAlAs/GaAs heterostructure bipolar transistors.” J. Appl. Phys. 64, pp.5009-5012, 1988.
[4] W. Liu, Handbook of III-V heterojunction bipolar transistors. New York: Wiley, 1998.
[5] J. Kruse, P.J. Mares,D. Scherrer, M. Feng, and G.E. Stillman,” Temperature dependent study of carbon-doped InP/InGaAs HBT's,” IEEE Electron Device Letters, vol.17, no.1, pp.10-12, Jan. 1996.
[6] S.Y. Chiu, A.F.M. Anwar, S. Wu,” Base transit time in abrupt GaN/InGaN/GaN HBT's,” IEEE Trans. Electron Devices, vol. 47, no. 4, pp.662-666, Apr. 2000.
[7] R.E. Welser, P.M. DeLuca, and N. Pan, ’ Turn-on voltage investigation of GaAs-based bipolar transistors with Ga1-xInxAs1-yNy base layers,” IEEE Electron Device Letters, vol.21, no.12, pp.554-556, Dec. 2000.
[8] Y.M. Hsin, H.T. Hsu, K.P. Hseuh, W.B. Tang, C.C. Fan, C.H. Wang, C.W. Chen, and N.Y. Li ,‘Effects of annealing on the DC and RF performance of InGaP/InGaAsN/GaAs HBTs’, Accepted to be published in Journal of Electronics Materials 2003. (SCI)(EI)
[9] Q.J. Hartmann, H. Hwangbo, A. Yung, D.A. Ahmari, M.T. Fresina, J.E. Baker, and G.E. Stillman, ”Removal of hydrogen from the base of carbon-doped In0.49Ga0.51P/GaAs heterojunction bipolar transistors by ex situ annealing and the effects on devices characteristics’ , Appl. Phys. Lett. 68 (7), pp.982-987, 1996.
[10] C. Monier, A. G. Baca, S. Z. Sun, E. Armour, F. Newman, and H. Q. Hou, Appli. Phys. Lett. vol. 81, no.11, pp. 2103 , 2002.
[11] E.S. Yang, C.C. Hsu, H. B. Lo, and Yue-Fei Yang, “Modeling of current gain’s temperature Dependence in Heterojunction-Emitter Bipolar Transistor,” IEEE Trans. Electrons Devices, vol. 47, no. 7, pp.1315-1319, Jul. 2000.
[12] M. Kondow at al , ”Room temperature pulsed operation of InGaAsN’s laser diodes with excellent high-temperature performance,” J. Appl. Phys. vol.35, pp.5711-5713, Nov. 1996.
[13] Y. M. Hsin, H.T. Hsu, K. P. Hseuh, W. B. Tang, P. W. Li, and N. Y. Li1,” Effects of Annealing on the Performance of InGaP/InGaAsN/GaAs HBTs,”Journal of electronic materials , vol. 32, no.9, pp.928-951,2003.
[14] W, Liu, S.K. Fan, T. Henderson, and D. Davito, “Temperature dependences of current gains in GaInP/GaAs and AlGaAs/GaAs heterojunction bipolar transistor,” IEEE trans. Electron Devices, vol.40, no.7 pp.1351-1353, July 1993.
[15] Okamoto H, and M Ikeda, ”Measurement of the electron drift velocity in avalanching GaAs diodes,” IEEE Trans. Electrons Devices, vol. 3,no.23, pp.:372-374,Dev. 1976.
[16] B. Kramer, and A. Mircea, ”Determination of saturated electron velocity in GaAs,” Appl Phys Lett , vol.26, no.11, pp.623.1975.
[17] R. Allam , and J. Pribetich, ”Temperature dependence of electron saturation velocity in GaAs,” Electron Lett, vol. 26, no.11, pp.688, 1990.
[18] M.B. Das, E. Kopp, and H. Morkoc, “Determination of carrier saturation velocity in short-gate-length modulation-doped FET’s,” IEEE Electron Devices Letter , vol.5, no.11. pp.446-449, Apr. 1984;.
[19] S. Bandy , S. Nishimoto, S. Hyder , and C. Hooper,” Saturation velocity determination for In0.33Ga0.47As field-effect transistors,” Appl. Phys. Lett. Vol.38, no.10,pp.817, 1981
[20] J. Dickmann, C.H. Heedt, and H. Daembkes,” Determination of the electron saturation velocity in pseudomorphic AlxGa1-xAsInyGa1-yAs MODFETs at 300 and 100 K,” IEEE trans. Electron Devices, vol.36, no.10, pp.2315,1989.
[21] Y.M. Hsin, S.T. Hsu, C.C. Fan, “Electron saturation velocity of GaInP deduced in a GaInP/GaAs/GaInP double heterojunction bipolar transistor,” Appl Phys lett, vol 77, no. 10, pp.1538, 2000.
[22] Y.M. Hsin, W.B. Tang, and H.T. Hsu, “Temperature dependence of electron saturation velocity in GaAs measured in InGaP/GaAs HBT using DC and AC approaches,” Solid-State electronics, vol. 49, pp.295-300,2005.
[23] B. Kramer, and A. Mircea,” Determination of saturated electron velocity in GaAs,” Appl Phys Lett , vol. 26, no. 11, pp.623,1975.
[24] C.T. Kirk ,”A Theory of Transistor Cutoff Frequency (Ft) Falloff at High Current Densities,” IRE Trans. Electron Dev 1962; March:164.
[25] A. Josep, J.D. Cressler, D.M. Richey, and G. Niu,”Optimization of SiGe HBTs for operation at high current densities,” IEEE Trans. Electrons Devices, vol.46, no.7, pp.1347-1354,1999.
[26] S. M. Sze, Physics of semiconductor devices, John Wiley & Sons, 1981
[27] A.A.David , R. Gopal, J.H. Quesnell, L.H. Michael, F. Milton, E.S.Gregory,” Temperature Dependence of InGaP/GaAs Heterojunction Bipolar Transistor DC and Small-Signal Behavior,” IEEE Trans. Electrons Devices, vol.46, no. 4, pp.634, 1999.
[28] C. Chang, P. M. Asbeck , P. Zampardi , and K.C.Wang,”Direct measurement of Cbe and Cbc versus voltage for small HBT's with microwave s-parameters for scaled Gummel-Poon BJT models,’ IEEE Trans. Microwave Theory Tech. vol. 47, no.1, pp.108-110, Jan. 1999.
[29] J.J. Liou, L.L. Liou, C.I. Huang, and B. Bayraktaroglu ,”A physics-based, analytical heterojunction bipolar transistor model, including thermal and high-current effects,” IEEE Trans. Electrons Devices, vol. 40, no. 9, pp.1570-1577, Sept.1993.
[30] E.S. Harmon, M.L. Lovejoy , M.R. Melloch, M.S. Lundstrom, T.J. Lyon, and J.M. Woodall,”Experimental observation of a minority electron mobility enhancement in degenerately doped p-type GaAs,” Appl. Phys. Lett , vol 63. no. 4, pp.536,1993.
[31] G. Timp , J. Bude, K.K. Bourdelle, J. Garno J, et al,” The ballistic nano-transistor,” IEDM Tech. Dig., vol.55, 1999.
[32] N. Bovolon, P. Baureis, J.E. Muller, P. Zwicknagl, R. Schultheis, and E. Zanoni,” A simple method for the thermal resistance measurement of AlGaAs/GaAs heterojunction bipolar transistors,” IEEE Trans. Electrons Devices, vol. 45, no.8, pp.1846 – 1848, Aug. 1998.
[1] L. Degachi, and F.M. Ghannouchi,” Systematic and rigorous extraction method of HBT small-signal model parameters, IEEE Trans. Microwave Theory Tech. vol.54, no. 2, pp.682-688, 2006.
[2] S. Bousnina, P. Mandeville, A.B. Kouki, R. Surridge, and F.M. Ghannouchi, F.M, ” A new analytical and broadband method for determining the HBT small-signal model parameters,” IEEE MTT-S International Microwave Symposium Digest.vol.3, no.11, pp.1397-1400, 2000.
[3] B. Sheinman, E. Wasige, M. Rudolph, R. Doerner, V. Sidorov, S. Cohen, and D. Ritter,” A peeling algorithm for extraction of the HBT small-signal equivalent circuit,” IEEE Trans. Microwave Theory Tech. vol. 50, no.12, pp. 2804-2810, 2002.
[4] N. L. Wang, W.J. Ho, and J.A. Higgins,” New de-embedding method for millimetre-wave bipolar transistor S-parameter measurement,” Electronics Letters, vol. 27, no. 18, pp.1611-1612, 1991.
[5] Q. Liang; W.M. Kuo; J. Cressler, G. Niu, A.J. Joseph, and D.L. Harame,” Accurate AC transistor characterization to 110 GHz using a new four-port self-calibrated extraction technique,” 2004 Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems, vol. 8, pp.:282-285, 2004.
[6] P.B. Winson, S.M. Lardizabal, and L. Dunleavy,” A table-based bias and temperature-dependent small-signal and noise equivalent circuit model,” IEEE Trans. Microwave Theory Tech. vol. 45, no.1,pp.46-51, 1997.
[7] A. Pascht, M. Grozing, D. Wiegner, and M. Berroth,” Small-signal and temperature noise model for MOSFETs,” IEEE Trans. Microwave Theory Tech. vol. 50, no. 8, pp.1927-1934, 2002.
[8] U. Basaran, N. Wieser, G. Feiler, and M. Berroth,” Small-signal and high-frequency noise modeling of SiGe HBTs,” IEEE Trans. Microwave Theory Tech. vol. 53, no.3, pp.919-928, 2005.
[9] G. Niu,” Noise in SiGe HBT RF technology: physics, modeling, and circuit implications,”Proceedings of the IEEE, vol.93,no.9, pp.1583-1597, 2005.
[10] S. Bruce, K.J. Vandamme, and A. Rydberg,” Temperature dependence and electrical properties of dominant low-frequency noise source in SiGe HBT,” IEEE Trans. Electron Devices, vol. 47, no. 5, pp.1107-1112,2000.
[11] K. Woonyun, K.Sanghoon , L. Kyungho , C. Minchul , K. Jongchan, and K. Bumman,” Analysis of nonlinear behavior of power HBTs,” IEEE Trans. Microwave Theory Tech. vol.50,no.7, pp.1714-1722, 2002.
[12] C.M. Snowden, ” Large-signal microwave characterization of AlGaAs/GaAs HBT's based on a physics-based electrothermal model,” IEEE Trans. Microwave Theory Tech. vol. 45, no.1, pp.58 -71, 1997.
[13] K. Woonyun , K. Sanghoon , L. Kyungho , C. Minchul, Y. Youngoo , and K. Bumman,” The effects of Cbc on the linearity of AlGaAs/GaAs power HBTs,” IEEE Trans. Microwave Theory Tech. vol. 49, no.7,pp.1270-1276, 2001.
[14] J.H. Kim, Y.S. Noh, and C.S. Park,” Linearised HBT MMIC power amplifier with partially RF coupled active bias circuit for W-CDMA portable terminals applications,”Electronics Letters, vol.39, no.10, pp.781-783, 2003.
[15] K.W. Kobayashi, R. Kasody, A.K. Oki, and D.C. Streit,” A 5-10 GHz octave-band AlGaAs/GaAs HBT-Schottky diode down-converter MMIC,” IEEE Journal of Solid-State Circuits, vol.31, no.10, pp.1412-1418, 1996.
[16] K. Yamamoto, S. Suzuki,K. Mori, T. Asada,T. Okuda,A. Inoue, T. Miura,K. Chomei, R. Hattori, M. Yamanouchi, and T. Shimura,” A 3.2-V operation single-chip dual-band AlGaAs/GaAs HBT MMIC power amplifier with active feedback circuit technique,” IEEE Journal of Solid-State Circuits, vol. 35,no. 8, pp.1109-1120, 2000.
[17] B. Bayraktaroglu,” GaAs HBT's for microwave integrated circuits,” Proceedings of the IEEE, vol. 81, no.12, pp.1762 – 1785, 1993.
[18] W. Huei, K.W. Chang, L.T. Tran, J.C. Cowles, T.R. Block, E.W. Lin, G.S. Dow, A.K. Oki, D.C. Streit, and B.R. Allen,” Low phase noise millimeter-wave frequency sources using InP-based HBT MMIC technology,”
IEEE Journal of Solid-State Circuits, vol.31, no.10, pp.419-1425, 1996.
[19] T. Yoshimasu, M. Akagi, N. Tanba, and S. Hara,” An HBT MMIC power amplifier with an integrated diode linearizer for low-voltage portable phone applications,” IEEE Journal of Solid-State Circuits, vol. 33, no.9, pp.1290-296, 1998. |