參考文獻 |
[ 參考文獻]
參考文獻
[1]Hsu, P.-F., “Analytical and Experimental Study of Combustion in Porous Inert Media,” Ph.D. Dissertation, Department of Mechanical Engineering, The University of Texas at Austin, 1991.
[2]Evans, W. D., “Experimental Stability Limits of Methane Combustion Inside a Porous Ceramic Matrix,” M.S. Thesis, Department of Mechanical Engineering, The University of Texas at Austin, 1991.
[3]Weinberg, F. J., “Combustion Temperature: The Future?” Nature, Vol. 233, pp. 239-241, 1971.
[4]Lloyd, S. A., and Weinberg, F. J., “A Burner for Mixtures of Very Low Heat Content,” Nature, Vol. 251, pp. 47-49, 1974.
[5]Lloyd, S. A., and Weinberg, F. J., “Limits to Energy Release and Utilisation from Chemical Fuels,” Nature, Vol. 257, pp. 367-370, 1975.
[6]Hardesty, D. R., and Weinberg, F. J., “Burners Producing Large Excess Enthalpies,” Combustion Science and Technology, Vol. 8, pp. 201-214, 1974.
[7]Hardesty, D. R., and Weinberg, F. J., “Converter Efficiency in Burner Systems Producing Large Excess Enthalpies,” Combustion Science and Technology, Vol. 12, pp. 153-157, 1976.
[8]Takeno, T., and Sato, K., “An Excess Enthalpy Flame Theory,” Combustion Science and Technology, Vol. 20, pp. 73-84, 1979.
[9]Takeno, T., Sato, K., and Hase, K., “A Theoretical Study on an Excess Enthalpy Flame,” Eighteenth Symposium (International) on Combustion/The Combustion Institute, pp. 465-472, 1981.
[10]Kotani, Y., and Takeno, T., “An Experimental Study on Stability and Combustion Characteristics of an Excess Enthalpy Flame,” Nineteenth Symposium (International) on Combustion/The Combustion Institute, pp. 1503-1509, 1982.
[11]Echigo, R., Yoshizawa, Y. Hamamura, K., and Tomimura, T., “Analytical and Experimental Studies on Radiative Propagation in Porous Media With Internal Heat Generation,” Proceedings of the 8th International Heat Transfer Conference, San Francisco, CA, Vol. II, pp. 827-832, 1986.
[12]Chen, Y.-K., Matthews, R. D., and Howell, J. R., “The Effect of Radiation on the Structure of Premixed Flame within a Highly Porous Inert Medium,” 1987 ASME Winter Annual Meeting, ASME HTD-81.
[13]Chen, Y.-K., Hsu, P.-F., Lim, I.-G., Lu, Z.-H., Matthews, R. D., Howell, J. R., and Nichols, S. P., “Experimental and Theoretical Investigation of Combustion within Porous Inert Media,” Proceedings of the Twenty-Second Symposium (International) on Combustion, Seattle, Washington, pp. 22-207, 1988.
[14]Sathe, S. B., Peck, R. E., and Tong, T.-W., “Flame Stabilization and Multimode Heat Transfer in Inert Porous Media: A Numerical Study,” Combustion Science and Technology, Vol. 70, pp. 93-109, 1990.
[15] Sathe, S. B., Peck, R. E., and Tong, T.-W., “A Numerical Analysis of Heat Transfer and Combustion in Porous Radiant Burners,” International Journal of Heat and Mass Transfer, Vol. 33, No. 6, pp. 1331-1338, 1990.
[16]Tong, T.-W., and Sathe, S. B., “Heat Transfer Characteristics of Porous Radiant Burners,” Journal of Heat Transfer, Vol. 113, pp. 423-428, 1991.
[17]Hsu, P.-F., Howell, J. R., and Matthews, R. D., “A Numerical Investigation of Premixed Combustion within Porous Inert Media,” ASME/JSME Thermal Engineering Proceedings, Vol. 4, pp. 225-231, 1991.
[18]Evans, W. D., Howell, J. R., and Varghese, P. L., “The Stability Limits of Methane Combustion Inside a Porous Ceramic Matrix,” AIAA/ASME Joint Propulsion Conference, Sacramento, California, 1991.
[19]Hsu, P.-F., Howell, J. R., and Matthews, R. D., “A Numerical Investigation of Premixed Combustion within Porous Inert Media,” Transactions of the ASME, Vol. 115, pp. 744-750, 1993.
[20]Hsu, P.-F., Evans, W. D., and Howell, J. R., “Experimental and Numerical Study of Premixed Combustion within Nonhomogeneous Porous Ceramics,” Combustion Science and Technology, Vol. 90, pp. 149-172, 1993.
[21]Hsu, P.-F., “Experimental Study of the Premixed Combustion within the Nonhomogenous Porous Ceramic Media,” HTD-Vol. 328, National Heat Tranfer Conference, Vol. 6, ASME 1996.
[22]C.L. Hackert, J. L Ellzey, and O A. Ezekoye, “Combustion and Heat Transfer in Model Two-Dimensional Porous Burners,” Combustion and Flame, Vol. 116, 1999.
[23]Marc D. Rumminger, D. Hamlin, Robert W. Dibble, “Numerical analysis of a catalytic radiant burner: effect of catalyst on radiant efficiency and operability,” Catalysis Today Vol. 47, 1999.
[24]G. Brener, K. Pickenacker, O. Pickenacjer, D. Trmis,k. Wawrzinek, and t. Weber, “Numerical and Experimental Investigation of Matrix-Stabilized Methane/Air Combustion in Porous Inert Media”, Combustion Institute, 2000.
[25]L. di Mare, T.A. Mihalik, G. Continillo, J.H.S. Lee, “Experimental and Numerical Study of Flammability Limits of Gaseous Mixtures in Porous Media,” Experimental Thermal and Fluid Science, Vol. 21, 2000.
[26]Tseng, C.-J. and Li, C.-H., “Thermally-Enhanced Combustion in a Porous Medium Burner,” Journal of the Chinese Society of Mechanical Engineers, Vol. 22, No. 3, 2001.
[27]蔡桓宇,數值模擬多孔性介質燃燒爐中之熱增強燃燒現象;國立中央大學碩士論文;中壢;民國八十九年。
[28]Tseng, C.-J., “Liquid Fuel Combustion in Porous Ceramic Burners,” Ph.D. Dissertation, Department of Mechanical Engineering, The University of Texas at Austin, 1995.
[29]Tseng, C.-J., and Howell, J. R., “Liquid Fuel Combustion within Porous Inert Media,” Heat Transfer with Combined Modes, ASME-HTD, Vol. 299, pp. 63-69, 1994.
[30]Tseng, C.-J., and Howell, J. R., “Combustion of Liquid Fuels in a Porous Radiant Burner,” Combustion Science and Technology, Vol. 112, pp. 141-161, 1996.
[31]Kaplan, M., “The Combustion of Liquid Fuels within a Porous Media Radiant Burner,” M.S. Thesis, Department of Mechanical Engineering, The University of Texas at Austin, 1994.
[32]Kaplan, M., and Hall, M. J., “The Combustion of Liquid Fuels within a Porous Media Radiant Burner,” Experimental Thermal and Fluid Science, Vol. 11, pp. 13-20, 1995.
[33]S. Chandrasekhar, Radiative Transfer, Dover Publications, New York, 1996.
[34]Li, H.-Y., Özisik, M. N., and Tsai, J.-R., “Two-Dimensional Radiation in a Cylinder with Spatially Varying Albedo,” Journal of Thermophysics, Vol. 6, No. 1, pp. 180-182, 1992.
[35]Slah Jendoubi, HaeOk Skarda Lee, and Tae-Kuk Kim, “Discrete Ordinates Solutions for Radiatively Participating Media in a Cylindrical Enclosure,” Journal of Thermophysics and Heat Transfer, Vol. 7, No 2, April-June 1993.
[36]P. J. Coelho, J. M. Goncalves, and D. N. Trivic, “Modelling of Radiative Heat Transfer in Enclosures with Obstacles,” Int. J. Heat Mass Transfer, Vol. 41, Nos 4-5, 1998.
[37]Nuray Kayakol, Nevin Selcuk, Ian Campbell, Omer L. Gulder, “Performance of Discrete Ordinates Method in a Gas Turbine Combustor simulator,” Experimental Thermal and Fluid Science, Vol. 21, 2000.
[38]Bear, J., Dynamics of Fluids in Porous Media, Dover Publications, Inc., New York, 1972.
[39]Hiatt, J. P., and Hall, M. J., “Pore Scale Turbulence in Porous Ceramic Burners,” 1994 Technical Meeting of the Central States Section of the Combustion Institute, June, 1994.
[40]Bejan, A., Convection Heat Transfer, John Wiley & Sons, New York, Chap. 12, Sec. 2, 1995.
[41]S. Ergun, “Fluid Flow through Packed Columns,” Chem. Eng. Progr. , Vol. 48, No. 2, 1952
[42]Kaviany, M., Principles of Heat Transfer in Porous Media, Springer-Verlag, 1991.
[43]Bird, R. B., Stewart, W. E., and Lightfoot, E. N., Transport Phenomena, John Wiley & Sons, New York, 1960.
[44]Bird, R. B., Stewart, W. E., and Lightfoot, E. N., Transport Phenomena, John Wiley & Sons, New York, 1960.
[45]Kingery, W. D., Bowen, H. K., and Uhlmann, D. R., Introduction to Ceramics, Wiley, New York, 1975.
[46]Siegel, R., and Howell, J. R., Thermal Radiation Heat Transfer, Third Ed., Hemisphere Publishing Corp., Washington, DC., 1992.
[47]Chang, S. L., and Rhee, K. T., “Blackbody Radiation Functions,” International Communications of Heat Mass Transfer, Vol. 11, pp. 451-455, 1984.
[48]Hendricks, T. J., “Thermal Radiative Properties and Modeling of Reticulated Porous Ceramics,” Ph.D. Dissertation, Department of Mechanical Engineering, The University of Texas at Austin, 1994.
[49]Hsu, P.-F., and Matthews, R. D., “The Necessity of Using Detailed Kinetics in Models for Premixd Combustion within Porous Media,” Combustion and Flame, Vol. 93, pp. 457-466, 1993.
[50]Westbrook, C. K., and Dryer, F. L., “Simplified Reaction Mechanisms for the Oxidation of Hydrogen Fuels in Flames,” Combustion Science and Technology, Vol. 27, pp. 31-43, 1981.
[51]Ashok K. Varma, Ashok U. Chatwani, and Frediano V. Bracco, “Studies of Premixed Laminar Hydrogen-Air Flames Using Elementary and Global Kinetics Medels,” Combustion and Flame, Vol. 64, pp. 223-236, 1986.
[52]High-Tech Ceramics product literature, High-Tech Ceramics Co., Alfred, New York, 1988. |