參考文獻 |
1. H. Mavridis, A. N. Hrymak. and J. Vlachopoulos, "Finite Element Simulation of Fountain Flow in Injection Molding," Polymer Engineering and Science, Vol. 26, pp.449-454, 1986.
2. M. R. Kamal, S. K. Goyal and E. Chu, "Simulation of Injection Mold Filling of Viscoelastic Polymer with Fountain Flow," AICHE Journal, Vol. 34, pp.94-106, 1988.
3. R. E. Hayes, H. H. Dannelongue and P. A. Tanguy, "Numerical Simulation of Mold Filling in Reaction Injection Molding," Polymer Engineering and Science, Vol. 31, pp.842-848, 1991.
4. J. S. Yu, A. H. Wagner and D. M. Kalyon, "Simulation of Microstructure Development in Injection Molding of Engineering Plastics," Journal of Applied Polymer Science, Vol. 44, No. 3, pp.477-489, 1992.
5. A. N. Alexandrou and A. Ahmed, "Injection Molding Using a Generalized Eulerian Lagrangian Formulation," Polymer Engineering and Science, Vol. 33, pp.1055-1064, 1993.
6. M. Gupta and K. K. Wang, "Fiber Orientation and Mechanical Properties of Short Fiber Reinforced Injection Molded Composites: Simulation and Experimental Results," Polymer Composites, Vol. 14, pp.367-382, 1993.
7. S. C. Chen and K. F. Hsu, "Numerical Simulation and Experimental Verification of Melt Front Advancements in Coinjection Molding Process," Numerical Heat Transfer: An International Journal of Computation and Methodology, Part A: Applications, Vol. 28, No. 4, pp.503-513, 1995.
8. C. S. Chen and Y. C. Chen, "Calculations of the Flow-induced Residual Stress Development in the Injection Modeled Plate," Computers and Structures, Vol. 52, No. 5 pp.1043-1050, 1994.
9. D. S. Choi and Y. T. Im, "Prediction of Shrinkage and Warpage in Consideration of Residual Stress in Integrated Simulation of Injection Molding," Composites and Structures, Vol. 47, pp.655-665, 1999.
10. R. Zheng, P. Kennedy, N. P. Thien and X. J. Fan, "Thermoviscoelastic Simulation of Thermally and Pressure-induced Stresses in Injection Molding for the Prediction of Shrinkage and Warpage for Fibre-reinforced Thermoplastics," J. Non-Newtonian Fluid Mechanics, Vol. 84, pp.159-190, 1999.
11. J. P. Zuber, "CAE Processing Analysis of Plastic Fenders," Simultaneous Engineering in Automotive Development, Vol. 935, pp.17-26, 1992.
12. N. Santhanam and H. H. Chiang, "Postmolding and Load-induced Deformation Analysis of Plastic Parts in the Injection Molding Process, "Advances in Polymer Technology, Vol. 11, No. 2, pp.77-89, 1992.
13. P. H. Foss and J. P. Harris, "Prediction of Fiber Orientation and Mechanical Properties using C-MOLD and ABAQUS," Proceeding of the 54th ANTEC, Part1, pp.5-10, 1996.
14. C. L. Clark, C. K. Bals and M. A. Layson, "Effects of Fiber and Prophet Orientation on C Shaped Cross Sections," Polymer Composite Applications for Motor Vehicles, Vol. 25, pp.55-62, 1991.
15. L. Shi and M. Gupta, "Predication of Sink Marks in Injection-molded Plastic Parts using a Localized Shrinkage Analysis Near a Rib, "Proceeding of the 56th ANTEC, Part1, pp.609-613, 1996.
16. D. J. Battey and M. Gupta, "Finite Element Prediction of Sink Marks in Injection Molded Plastic Parts," ASME Materials Division, Vol. 79, pp.335-350, 1997.
17. J. P. Zuber, "CAE Processing Analysis of Plastic Fenders," Simultaneous Engineering in Automotive Development, Vol. 935, pp.17-26, 1992.
18. N. Santhanam and H. H. Chiang, "Postmolding and Load-induced Deformation Analysis of Plastic Parts in the Injection Molding Process," Advances in Polymer Technology, Vol. 11, No. 2, pp.77-89, 1992.
19. S. B. Singh and A. Kumar, "Postbuckling response and Failure of Symmetric Laminates under In-plane Shear," Vol. 58, pp.1949-1960, 1998.
20. D. J. Dawe and S. Wang, "Postbuckling Analysis of Thin Rectangular laminated Plates by Spline FSM," Thin-walled Structures Vol. 30, No. 1-4, pp.159-179, 1998.
21. K. A. Stevens, R. Ricci and G. A. O. Davies, "Buckling and Post-buckling of Composite Structures," Composite, Vol. 26, pp189-199, 1995.
22. B. G. Falzon and G. P. Steven, "Postbuckling Behaviour of Hat-stiffened Thin-skinned Carbon-fire Composite Panels," Proceedings of the 36th AIAA Structures, Structural Dynamics and Materials Conference, Part 4, pp.20-23, 1995.
23. G. Zhang and R. A. J. Latour, "Three-dimensional Micromechanical Model of the Compressive Behaviour of Unidirectional FRP Composite," Journal of Thermoplastic Composite Materials Vol. 10, No. 2, pp.173-184, 1997.
24. C. W. Kong, I. C. Lee, C. G. Kim and C. S. Hong, "Postbuckling and Failure of Stiffened Composite Panels under Axial Compression," Composite Structures, Vol. 42, pp.13-21, 1998.
25. S. S. Wang, S. Srinivasan, H. T. Hu and R. Hajali, "Effect of Material Nonlinearity on Buckling and Postbuckling Plates and Cylindrical Shells," Composite Structures, Vol. 33, No. 1, pp.7-15, 1995.
26. E. Feldman, "Postbuckling Analysis of Laminated Plates Made of Discontinuous Metal Matrix Composite," Composite Structures, Vol. 32, Issue 1-4, pp.89-96, 1995.
27. C. Bisagni, "Exoerimental Buckling of Thin Composite Cylinders in Compression," AIAA Journal, Vol. 37, No. 2, pp.276-278, 1999.
28. D. Touati and G. Cederbaum, "Postbuckling of Non-linear Viscoelastic Imperfect Laminated Plates. Part II: Structural Analysis," Composite Structures, Vol. 42, No. 1, pp.43-51, 1998.
29. J. S. Tomblin, "Imperfection sensitivity of Fiber Micro-buckling in Elastic-nonlinear Polymer-matrix Composite," International Journal of Solids and Structures, Vol. 34, No. 13, pp.1667-1679, 1997.
30. C. A. Featherston, "Imperfection Sensitivity of Flat Plates under Combined Compression and Shear," International Journal of Non-linear Mechanics, Vol. 36, pp.249-259, 2001.
31. A. Mertol, "Applications of the Taguchi method on the Robust Design of Molded Plastic Ball Grid Array Package," IEEE Transactions Components Packaging and Manufacturing Technology, Part B, pp. 734-743, 1995.
32. D. E. Pachucki, "Environmental Stress Testing Experiment using Taguchi Method," IEEE Transactions Components Package and Manufacturing Technology, Part A, pp. 3-9, 1995.
33. T. Y. Chou, "Applications of Taguchi Method for Optimized Package Design," Electrical Performance of Electronic Packaging, IEEE, 1996.
34. A. Metrol, "Optimization of High Pin Count Cavity-up Enhanced Plastic Ball Grid Array (EPBGA) Package for Robust Design," IEEE Transactions Components Packaging and Manufacturing Technology, Part B, pp. 376-388, 1997.
35. M. Fujiama and H. Awaya, "Mechanical Anisotropy in Injection-molded Polypropylene," Journal of Applied Polymer Science, Vol. 21, pp.3291-3309, 1977.
36. H. T. Hahn, K. L. Jerina and P. Burrett, "Fiber Orientation and Fracture Morphology in Short Fiber-reinforced Thermoplastics," Advances in Thermoplastic Matrix Composite Materials, ASTM STP 1044, pp.183-198, 1989.
37. P. Singh and M. R. Kamal, "The Effect of Processing Variables on Microstructure of Injection Molded Short Fiber Reinforced Poypropylene," Polymer Composites, Vol. 10, pp.344-351, 1989.
38. S. Kenig, "Fiber Orientation Development in Molding of Polymer Composite," Polymer Composites, Vol. 7, pp.50-55, 1986.
39. M. Sanou, B. Chung and C. Cohen, "Glass Fiber-filled Thermoplastics. Ⅱ. Cavity Filling and Fiber Orientation in Injection Molding," Polymer Engineering and Science, Vol. 25, pp.1008-1016, 1985.
40. B. Lauke, "Theoretical Considerations of Toughness of Short-fiber-reinforced Thermoplastics," Polymer Plastic Technology Engineering, pp.607-806.
41. C. Lhymn, "Tribological Properties of Unidirectional Polyphenylene Sulfide-carbon Fiber Laminate Composites," Wear, Vol. 117, pp.147-159, 1987.
42. J. K. Kocsis and K. Friedrich, "Microstructural Details and the Effect of Testing Conditions on the Fracture Toughness of Injection-molded Poly (phenylene-sulphide) Composites," Journal of Materials Science, Vol. 22, pp.947-961, 1987.
43. J. K. Kocsis and K. Friedrich, "Fracture Behavior of Injection-molded Short and long Glass Fiber-polyamide 6.6 Composites," Composites Science and Technology, Vol. 32, pp.293-325, 1988. |