摘要(英) |
This text is mainly the goal to do a series of discussions to the design and verification of asymmetry type LED that is applied to the traffic signal. First of all, introduce the normal kinds of specifications of the traffic signal and luminous intensity demand, then direct against the analysis of the advantages and shortcomings of LED traffic signal classification in the optics design in the world at present. And then, we can find out LED chip light optical model according to the comparison between measurement and optical simulation, utilize this give out light optics model of chip to design LED of asymmetry type by computer simulation, and then make the LED mold and package asymmetry type LED. In order to verify the exactness of optics simulation, we measure the optical data of asymmetry type LED to compare with the result of optics simulation. Later, carry on the normal verification of traffic signal specification, in order to confirm the practicability of this asymmetry type LED. Finally, carry on the packaging variation analysis of asymmetry type LED in order to understand the effect upon optics characteristic. According to these results, we can improve the packaging error to reach the goal of packaging uniformity.
In a word, according to the special demand of light distribution of traffic signal specification, we can find out the asymmetry type LED to satisfy the special demand of traffic signal by way of optics simulation, follow specific procedure. Later, we can make a series of actual experiments to compare with result of optics simulation in order to confirm the correctness of the LED. Finally, we product the LED traffic signal and measure it by specification of traffic signal in order to verify the practicability. Such as the asymmetry type LED can lower the costs of traffic signal and reach the goal to save the energy. |
參考文獻 |
1. 韓斌,“經濟部所屬事業協助中小企業推動研究發展計劃結案報告-高節能發光二極體號誌燈,” P3-5,恒嘉光電股份有限公司,新竹(2000).
2. 林志勳,“LED交通號誌燈應用優勢,” P1,工研院IEK化材組,新竹(2005).
3. 蔡國猷,”發光二極體基礎技術,” P17-26,建與出版社,台北縣(1997).
4. “Purchase Specification Light Emitting Diode (LED) Signal Modules,” P10, California Department of Transportation, (2001).
5. “Vehicle Traffic Control Heads: Light Emitting Diode (LED) Circular Signal Supplement,” P13, Institute of Transportation Engineers, NW (2005).
6. “LED交通號誌燈燈面及燈箱規格與測試,” P4,中華民國經濟部標準檢驗局,(2005).
7. 李炳基,宋楚文,李灌釗,張聲,“LED交通信號燈,” P1,專利號:03273271.6,中華人民共和國國家知識產權局,廣東佛山(2003).
8. C.T. Hsieh, P.L. Huang, C.C. Lin, “LED Signal Light,” P1, Ahead Optoelectronics, Inc, US 6,599,002, Taipei (2001).
9. Matthiks H. Keuper, Antonius J. M.Van Hees,“ Signal Lamp with LEDs,” P1,U.S. Philips Corporation, New York( 1999).
10. Lambda Research Corporation (http://www.lambdares.com).
11. 訊技科技 (http://www.infotek.com.cn).
12. 林昭穎,“發光二極體導光機構之研究,”中央大學光電所(2002).
13. 黃志銘,“大面積發光二極體二維發光分佈之模擬與量測,”中央大學光電所(2003).
14. 黃柏誠,“大面積高功率發光二極體導光元件之設計,”中央大學光電所(2004). |