參考文獻 |
REFERENCE
[1] R. Dingle, H.L. Stormer, A.C. Gossard, and W. Wiegmann, “Electron Mobilites in Modulation-Doped Semiconductor Heterojunction Super lattices”, Appl. Phys. Lett., 33, pp. 6655-678, 1978.
[2] P.C. Chao, S.C. Palmateer, P.M. Smith, U.K. Mishra, K. H. g. duh, and J. C. M. Hwang, “Millimeter-Wave Low-noise High Electron Mobilites Transistors”, IEEE Electron Device Lett., 6, pp. 531-533, 1985.
[3] A.W. Swanson, J. Herb, and M. Young, “First Commercial HEMT Challenges GaAs FETs”, Microwave & RF, 24, pp. 107-110, Nov, 1985.
[4] H. Brech, Doctor thesis, “ "Optimization of GaAs Based High Electron Mobility Transistors by Numerical Simulation” Institute of Microelectons, Vienna, Austria, 1998.
[5] J. G. Ruch, G. S. Kino, "Transport Properties of GaAs," Phys. Rev. 174, pp. 921¬931, 1968.
[6] N. Braslau and P. S. Hauge, "Microwave Measurement of the Velocity-Field Characteristic of GaAs," IEEE Trans. Electron Devices, Vol. 17, No. 8 pp. 616¬622, 1970.
[7] P. A. Houston and A. G. R. Evans, "Electron Drift Velocity in n-GaAs at High-Fields," Solid-State Electronics, Vol. 20, pp. 197-¬204, 1977.
[8] M. A. Littlejohn, K. W. Kim, and H. Tian, "High-Field Transport in InGaAs and Related Heterostructures," in Properties of Lattice¬Matched and Strained Indium Gallium Arsenide, P. Bhattacharya (ed.), INSPEC, the Institution of Electrical Engineers, London, pp. 107¬-116, 1993.
[9] F. Schwierz and J.J. Liou, Modern Microwave Transistors Theory, Design, and Performance. New York; Wiley, 2002.
[10] A. Ketterson, W. T. Masselink, J. S. Gedymin, J. Klem, W. Kopp, H. Morkoc, and K. R.Gleason, “Characteristics of InGaAs/AlGaAs Modulation-Doped Field Effect Trnasitor”, IEEE Trans. Electron Devices, 33, pp. 564-571, 1986.
[11] T. Heenderson. M. Aksun, C. Peng, H. Morkloc, P.C. Chao, P.M. Smith, K. H. G. Duh, and L. F. Lester, “Microwave Performance of a Quarter-Microwave gate low-noise pseudomorphic AlGaAs/InGaAs MODFET”, IEEE Electron Device Lett., 7, pp. 645-647, 1986.
[12] K. Hirose, K. Ohata, T. Mizutani, T. Itoh, and M.Ogawa, “700 mS/mm 2DEGFETs Fabricated from High Mobility MBE-Grown n-AlInAs/InGaAs Heterostructures”, Proc. GaAs and Related Compounds, pp. 529-532, 1985.
[13] M.T. Yang, Y.J. Chan, J.L. Shieh, and J.I. Chyi,” The performance enhancement in metamorphic InAlAs/InGaAs doped-channel FET’s on GaAs substrates”, IEEE Electron Device Lett., 17, pp. 410-412, 1996.
[14] M. Zaknoune, B. Bonte, C. Gaquiere, Y. Cordier, Y. Druelle, D. Theron and Y. Crosnier,” InAlAs/InGaAs metamorphic HEMT with high current density and high breakdown voltage”, IEEE Electron. Device Lett., 19, pp. 345-347, 1998.
[15] M. Zaknoune, Y. Cordier, S. Bollaert, D. Ferre, D. Theron and Y. Crosnier,” 0.1 µm high performance metamorphic In0.32Al0.68As/In0.33Ga0.67As HEMT on GaAs using inverse step InAlAs buffer”, Electron. Lett. 35, pp. 1670-1671, 1999
[16] M. Schlectweg, A. Leuther, A. Tessmann, C. Schwoer ,H. Massler, W. Reinert, M. Lang, U. Nowotny, O. Kappeler, M. Walther, R. Losch, “Millmerter-wave and Mixed-Signal Integrated Circuits Based on Advanced Metamorphci HEMT Technology”, Proceeding of Indium Phosphide and Related Materials Conference, pp. 609-614, 2004.
[17] D. W. Tu, S. Wang, J. S. M. Liu, K. C. Hwang, W. Kong, P.C. Chao, K. Nichols, “High-performance double-recessed InAlAs/InGaAs power metamorphic HEMT on GaAs substrate”, IEEE Microwave and Guided wave Lett., 9, pp. 458-460, 1999.
[18] K. Yuan, K. Radhakrishnan, “High breakdown voltage InAlAs/InGaAs metamorphic HEMT using InGaP graded buffer”, Proceeding of Indium Phosphide and Related Materials Conference, pp. 161-164, 2002.
[19] M. Chertouk, H. Heiss, D. Xu, S. Kraus, W. Klein, G. Bohm, G. Trankle, and G. Weimann, “Metamorphic InAlAs/InGaAs HEMT’s on GaAs substrates with a novel composite channel design,” IEEE Electron Device Lett., vol. 17, pp. 273–275, Jun.1996.
[20] D.M. Gill, B.C. Kane, S.P. Svensson, D.W. Tu, P.N. Uppal, and N.E. Byer, “High performance, 0.1 μm InAlAs/InGaAs high electron mobility transistors on GaAs,” IEEE Electron Device Lett., vol. 17, pp. 328–330, Jul. 1996.
[21] S. Bollaert, Y. Cordier, V. Hoel, M. Zaknoune, H. Happy, S. Lepilliet, and A. Cappy, “Metamorphic In0.4Al0.6As/In0.4Ga0.6As HEMTs on GaAs substrate,” IEEE Electron Device Lett., vol. 20, pp. 123–125, Mar. 1999.
[22] M. Kawano, T. Kuzuhara, H. Kawasaki, F. Sasaki, and H. Tokuda, “InAlAs/InGaAs metamorphic low noise HEMT,” IEEE Microwave Guided Wave Lett., vol. 7, pp. 6–8, Jan. 1997.
[23] H. Happy, S. Bollaert, H. Foure, and A. Cappy, “Numerical analysis of device performance of metamorphic InyAl1-yAs/InxGa1-xAs (0.3≦x≦0.6) HEMTs on GaAs substrate,” IEEE Trans. Electron Devices, vol. 45, pp. 2089-2095, Oct. 1998.
[24] M. Zaknoune, B. Bonte, C. Gaquiere, Y. Cordier, Y. Druelle, D. Theron, and Y. Crosnier, “InAlAs/InGaAs metamorphic HEMT with high current density and high breakdown voltage’, IEEE Electron Device Lett.”, vol. 19, pp. 345-347, 1998.
[25] C. S. Whelan, W. E. Hoke, R. A. McTaggart, P. S. Lyman, P. F. Marsh, R. E. Leoni, S. J. Lichwala, and T. E. Kazior, “High breakdown voltage InAlGaAs/In0.32Ga0.68As metamorphic HEMT for Microwave and mm-wave Power applications”. Proc. IEEE MTT-S Int. Microwave Symposium Digest, June 1999, Anaheim, CA, USA, Vol. 3, pp. 1187-1190.
[26] W. Contrata, and N. Iwata, “Double-doped In0.35Al0.65As/In0.35Ga0.65 As power heterojunction FET on GaAs substrate with 1 W output power”, IEEE Electron Device Lett., vol. 20, pp. 369-371, 1999.
[27] H. Fourre, F. Diette, and A. Cappy, “Selective wet etching of lattice matched InGaAs/InAlAs and metamorphic InGaAs/InAlAs on GaAs using succinic acid/hydrogen peroxide solution,” J. Vac. Sci. Technol., vol. B14, pp. 3400–3402, Sept./Oct. 1996.
[28] J. A. del Alamo, M. H. Somerville, M.H; “Breakdown in millimeter-wave power InP HEMTs: a comparison with GaAs pHEMT's, “ IEEE Journal of Solid-State Circuits, vol. 34, pp. 1204-1211, 1999.
[29] R. Williams, Modren GaAs Processing Methods, Norwood : Artech House, 1990
[30] P. J. Tasker and B. Hughes, “Importance of source and drain resistance to the maximum f T of millimeter-wave MODFETs,” IEEE Electron Device Lett., vol. 10, pp. 291-293, 1989.
[31] R. Anholt, S. Swirhun, “Measurement and Analysis of GaAs Parasitic Capacitances,“ IEEE Trans. Microwave Theory Tech., vol. 39 pp. 1243, 1991.
[32] G. Dambrine et al, “A New Method for Determining the FET Small-Signal Equivalent Circuit,” IEEE Trans. Microwave Theory Tech., vol. 36, pp.1511, 1988.
[33] C. K. Lin, Master Thesis, National Central University, 2001.
[34] N. Moll, M. R. Hueschen, and A. Fisher-Colbrie, “Pulsed-doped AlGaAs/InGaAs pseudomorphic MODFET’s,” IEEE Trans. Electron Devices, vol. 35, pp. 879-886, 1988.
[35] S.R. Bahl, J.A. del Alamo, “Physics of breakdown in InAlAs/n+-InGaAs heterostructure field-effect transistors”, IEEE Trans. Electron Devices, vol. 41, pp. 2268-2275, Dec. 1994
[36] K. Hui, C. Hu, P. George, P.K. Ko, “Impact ionization in GaAs MESFETs”, IEEE Electron Device Letters, vol. 11 , pp. 113-115, Mar. 1990.
[37] K. L. Tan, P. H. Liu, D. C. Streit, R. Dia, A .C. Han, A. Freudenthal, J. Velebir, K. Stolt, J. Lee, M. Bidenbender, R. Lai, H. Wang, B. Allen, “A manufacturable high performance 0.1-μm pseudomorphic AlGaAs/InGaAs HEMT process for W-band MMICs” IEEE GaAs IC Symposium Technical Digest, 1992, pp. 251-254.
[38] A. Endoh, Y. Yamashita, M. Higashiwaki, K. Hikosaka, T. Mimura, S. Hiyamizu, and T. Matsui, “High fT 50-nm-gate lattice-matched InAlAs/InGaAs HEMTs” Proc. Int. Conf. on Indium Phosphide and Related Materials, IPRM, 2000, pp. 87-90.
[39] H. Suehiro, T. Miyata, S. Kuroda, N. Hara, M. Takikawa, IEEE Trans. Electron Devices, 1994; 41:1742.
[40] Y. Awano, M. Kosugi, K. Kosemura, T. Mimura, M. Abe, IEEE Trans. Electron Devices, 1989, 36:2260.
[41] H. Rohdin, C. Y. Su, N. Moll, A. Wakita, A. Nagy, V. Robbins, and M. Kauffman, Proceedings of Intl. Conf. on Indium Phosphide Related Materials, 1997; 357.
[42] C.S. Chang, D. Y. S. Day, S. Chan, “ A analytical two-dimensional simulation for the GaAs MESFET Drain-Induced Barrier Lowering: A Short-Channel Effect” IEEE Trans. Electron Devices, vol. 37, May, 1990, pp. 1182-1186.
[43] N. Moll, M. R. Hueschen, and A. Fisher-Colbrie, “Pulsed-doped AlGaAs/InGaAs pseudomorphic MODFET’s,” IEEE Trans. Electron Devices, vol. 35, pp. 879-886, 1988.
[44] T. Enoki, Y. Ishii, T. Tamamura, “ T-gate process and delay time analysis for sub-1/4-μm-gate InAlAs/InGaAs HEMT's,” Proc. of 3rd Int. Conf. Indium Phosphide and Related Materials, Cardiff, U.K., pp. 371 –376, 1991.
[45] D. Xu, H. Heiss, S. Kraus, M. Sexl, G. Bohm, G. Trankle, G. Weimann, G. Abstreiter, “High-performance double-modulation-doped InAlAs/InGaAs/InAs HFETs,” IEEE Electron Device Letters, vol. 18, pp.323-326, Jul. 1997.
[46] L.D. Nguyen, L.E. Larson, U.K. Mishra, “Ultra-high speed modulation-doped field-effect transistors: a tutorial review,” Proc. of IEEE, vol. 80, pp. 494-518, Apr. 1992.
[47] H. C. Chiu, S. C. Yang, C. K. Lin, M. J. Hwu, H. K. Chiou, Y. J. Chan, “K-Band Monolithic InGaP/InGaAs DCFET Amplifier Using BCB Coplanar Waveguide Technology”, IEEE Electron Device Lett., vol. 25, pp. 253-255, May, 2004.
[48] J. Kim, W. Ko, S. H. Kim, J. Jeong, and Y. Kwon, “A High-performance 40-85 GHz MMIC SPDT Switch Using FET-Integrated Transmission Line Structure,” IEEE Microwave and Wireless Components Lett., vol. 13, pp. 505–507, Dec. 2003.
[49] S.F. Chang, W. L. Chen, J. L. Chen, H. W. Kuo, H. Z. Hsu, “New millimeter-wave MMIC switch design using the image-filter synthesis method”, IEEE Microwave and Wireless Components Lett., I, vol. 14 , pp. 103-150, Mar., 2004.
[50] H. Mizutani and Y. Takayama, “A DC-60 GHz GaAs MMIC switch using novel distributed FET,” IEEE MTT-S Tech. Dig., vol. 1, pp. 439–442, 1997.
[51] U.K. Mishera, A. S. Brown, L. M. Jelloisan, L. H. Hackett, and M. J. Delaney, “High-performance submicormeter AlInAs-GaInAs HEMTs,” IEEE Electron Device Lett., vol. 9, pp. 41-43, 1988.
[52] K.H. Duh, P.C. Chao, S. M. J. Liu, P. Ho, M. Y. Kao, and J. M. Ballingall, “A super low noise 0.1 ?m T-gate InAlAs/InGaAs/InP HEMT,” IEEE Microwave and Guided Lett., vol, 1, pp. 114-116, 1991.
[53] T. Enoki, M. Tomizawa, Y. Umeda, and Y. Ishii, “0.05-mm gate InAlAs/InGaAs high electron mobility transisitor and reduction of its short-channel effects,” Jpn. J. Appl. Phys., vol. 33, pp. 798-803, 1994.
[54] D.M. Gill, B.C. Kane, S.P. Svensson, D.W. Tu, P.N. Uppal, and N.E. Byer, “High performance, 0.1 μm InAlAs/InGaAs high electron mobility transistors on GaAs,” IEEE Electron Device Lett., vol. 17, pp. 328–330, Jul. 1996.
[55] N. Harada, S. Kuroda, T. Katakami, K. Hikosaka, T. Mimura, and M. Abe, “Pt-based gate enhancement-mode InAlAs/InGaAs HEMT’s for large-scale integration,” in Proc. 3rd Int. Conf. InP and Rel. Mat., pp. 377–380, 1991.
[56] K. Chen, T. Enoki, K. Maezawa, K. Arai, and M. Yamamoto, “High performance InP-based enhancement-mode HEMT’s using nonalloyed ohmic contacts and Pt-based buried-gate technologies,” IEEE Trans. Electron Devices, vol. 43, pp. 252–257, 1996.
[57] I. Adesida, A. Mahajan, G. Cueva, ”Enhancement-mode InP-based HEMT devices and applications” Indium Phosphide and Related Materials, 1998 International Conference on , 11-15 May 1998, pp.493 – 496.
[58] A. Mahajan, A, M. Arafa, P. Fay, C. Caneau, and I. Adesida, “Enhancement-mode high electron mobility transistors (E-HEMTs) lattice-matched to InP”, IEEE Trans. Electron Devices, vol. 45, pp. 2422-2429, Dec. 1998
[59] D. C. Dumka, W. E. Hoke, P. J. Lemonias, G. Cueva, and I. Adesida, “ High performance 0.35 μm gate-length monolithic enhancement/depletion-mode metamorphic In0.52Al0.48As/In0.53Ga0.47 As HEMTs on GaAs substrates” IEEE Electron Device Lett., vol. 22, pp. 364–366, Aug. 2001.
[60] P. Robin, L, Ride, S. Brown, L. H. Camnitz, G. W. Wicks, J. D. Berry, and L. F. Eastman, “Depletion- and enhancement-mode AlInAs/InGaAs MODFETs with a recessed gate structure,” in Int. GaAs and Related Compounds, Inst. Phys. Conf. Ser., no. 79, Karuizawa, Japan, 1985, pp. 571-576.
[61] H. Fourre, F. Diette, and A. Cappy, “Selective wet etching of lattice matched InGaAs/InAlAs and metamorphic InGaAs/InAlAs on GaAs using succinic acid/hydrogen peroxide solution,” J. Vac. Sci. Technol., vol. B14, pp. 3400–3402, Sept./Oct. 1996.
[62] N. Harada, S. Kuroda, and K. Hikosaka, “N-InAlAs/InGaAs HEMT DCFL inverter fabricated using Pt-based gate and photochemical dry etching,” IEICE Trans., vol. 10, pp. 1165–1171, 1992.
[63] L. Sadwick, C. Kim, K. Tan, and D. Streit, “Schottky barrier heights of n-type and p-type AlInAs,” IEEE Electron Device Lett., vol.18, pp. 626–628, 1997.
[64] A. Fricke, G. Stareev, T. Kummetz, D. Sowada, J. Mahnss, W. Kowalsky, and K. Ebeling, “1.09-eV Schottky barrier height of nearly ideal Pt/Au contacts directly deposited on n_ and p+n_Al0:48In0:52As layers,” Appl. Phys. Lett., vol. 65, pp. 755–757, 1994.
[65] H. C. Caery, Devices for integrated circuits, John Willey, 1999
[66] R. Soares, GaAs MESFET circuit design, Artech House, 1998.
[67] N. Moll, M. R. Hueschen, and A. Fisher-Colbrie, “Pulsed-doped AlGaAs/InGaAs pseudomorphic MODFET’s,” IEEE Trans. Electron Devices, vol. 35, pp. 879-886, Jul. 1988.
[68] J. Dickmann, H. Dambkes, R. Losch, W. Schlapp, J. Bottcher, and H. Kunzel, “Influence of surface layers on the RF-performance of AlInAs-GaInAs HFETs “, IEEE Trans. Microwave and Guided Wave Letters, vol. 2, pp. 472-474, Dec, 1992.
[69] R. J. Trew and U. K. Mishra, ‘Gate breakdown in MESFETs and HEMTs”, IEEE Electron Device Lett., vol. 12, pp. 524-526, Oct, 1991.
[70] Y. Hori, M. Kuzuhara, Yuji Ando, and M. Mizuta, “Analysis of electric field distribution in GaAs metal–semiconductor field effect transistor with a field-modulating plate”, J. Appl. Phys. vol. 87, April, pp.3483-3487, 2000.
[71] J. C. Huang, P. Saledas, J. Wendler, A. Platzker, W. Boulais, S. Shanfield, W. Hoke, P. Lyman, L. Aucoin, A. Miquelarena, C. Bendard and D. Atwood, “A double-recessed Al0.24GaAs/In0.16GaAs pseudomorphic HEMT for Ka-band power applications”, IEEE Electron Device Lett., vol. 14, pp. 456-458, Sep, 1993.
[72] K. Y. Hur, R.A. Mctaggart, B. W. LeBlanc, W.E. Hoke, P.J. Lemonias, A. B. Miller, T.E. Kazior, and L. M. Aucoin, Technical Digest of the 17th IEEE Gallium Arsenide Integrated Circuit Symposium, San Diego, U.S.A., 29 Oct-1 Nov, 1995, pp. 101-104.
[73] F. Robin, H. Meier, O. J. Homan and W. Bachtold, Proceeding of the 14th Indium Phosphide and Related Materials Conference, Stockholm, Sweden, 12-16 May, 2002, pp. 221-224.
[74] R. Grundbacher, I. Adesida, Y. C. Kao, and A.A. Ketterson, “ Single step lithography for double-recess ed gate pseudomorphic high electron mobility transistors”, J. Vac. Sci. Technol. B 15, vol. 1, pp. 49-52, Jan/Feb, 1997.
[75] J. Li, S.J. Cai, G.Z. Pan, Y.L. Chen, C.P. Wen, and K.L. Wang, “High breakdown voltage GaN FET with field plate”, IEE Electronics Letters, vol. 37, pp.196-196, Feb, 2001.
[76] G. Meneghesso, A. Neviani, R. Oesterholt, M. Matloubian, T. Liu, J. J. Brown, C. Canali and E. Zanoni, “On-state and off-state breakdown in GaInAs/InP composite-channel HEMT's with variable GaInAs channel thickness”IEEE Trans. Electron Devices, vol. 46, pp. 2-9, Jan, 1999. |