參考文獻 |
[1] J. Smuk and M. Shifrin, “Monolithic GaAs multi-throw switches with integrated low-power decoder/driver logic,” IEEE Radio Frequency Integrated Circuits Symp. Dig., pp. 47-50, 1999.
[2] H. Tosaka, et al, “An antenna switch MMIC using E/D mode p-HEMT for GSM/DCS/PCS/WCDMA bands application,” IEEE Radio Frequency Integrated Circuits Symp. Dig., pp. 519-522, 2003.
[3] Q. Li, Y. P. Zhang, K. S. Yeo, and W. M. Lim, “16.6- and 28-GHz fully integrated CMOS RF switches with improved body floating,” IEEE Trans. Microw. Theory Tech., vol. 56, no. 2, pp. 339–345, Feb. 2008.
[4] A. Poh and Y. P. Zhang, “Design and analysis of transmit/receive switch in triple-well CMOS for MIMO wireless systems,” IEEE Trans. Microw. Theory Tech., vol. 55, no. 3, pp. 458–466, Mar. 2007.
[5] S. Fouladi and R. R. Mansour, “Capacitive RF MEMS switches fabricated in standard 0.35- m CMOS technology,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 2, pp. 478–486, Feb. 2010.
[6] W.-T. Tu and K. Chang, “Piezoelectric transducer-controlled dual-mode switchable bandpass filter,” IEEE Microw. Wireless Compon. Lett., vol. 17, no. 3, pp. 199–201, Mar. 2007.
[7] E. Fourn, A. Pothier, C. Champeaux, P. Tristant, A. Catherinot, P. Blondy,G. Tanne, E. Rius, C. Person, and F. Huret, “MEMS switchable interdigital coplanar filter,” IEEE Trans. Microw. Theory Tech., vol. 51, no. 1, pp. 320–324, Jan. 2003
[8] Y.-H. Shu, J. A. Navarro, and K. Chang, “Electronically switchable and tunable coplanar waveguide-slotline band-pass filters,” IEEE Trans. Microw. Theory Tech., vol. 39, no. 3, pp. 548–554, Mar. 1991.
[9] T.-Y. Yun, and K. Chang, “Piezoelectric-transducer-controlled tunable microwave circuits,” IEEE Trans. Microw. Theory Tech., vol. 50, no. 5, pp. 1303–1310, May 2002
[10] A. Abbaspour-Tamijani, L. Dussopt, and G. M. Rebeiz, “Miniature and tunable filters using MEMS capacitors,” IEEE Trans. Microw. Theory Tech., vol. 51, no. 7, pp. 1878–1885, Jul. 2003
[11] B. Lui, F. Wei and X. Shi, “Switchable bandpass filter with two-state frequency responses,” Electronics. Lett., vol. 47, no. i, 6th January. 2011.
[12] Zhang, X.Y., and Xuei, Q, “Novel dual-mode dual-band filters using coplanar-waveguide-fed ring resonators,” IEEE Trans. Microw. Theory Tech., 2007, 55, (10), pp. 2183–2190.
[13] A. Gorur, “Description of coupling between degenerate modes of a dual-mode microstrip loop resonator using a novel perturbation arrangement and its dual-mode bandpass filter applications,” IEEE Trans. Microw. Theory Tech., vol. 52, no. 2, pp. 671–677, Feb. 2004.
[14] W. H. Tu and K. Chang, “Compact microstrip bandstop filter usingopen stub and spurline,” IEEE Microw. Wireless Compon. Lett., vol. 15, no. 4, pp. 268–270, Apr. 2005.
[15] C. Y. Hang,W. R. Deal, T. Qian, and T. Itoh, “High efficiency transmitter front-ends integrated with planar an PBG,” in Asia-Pacific Microwave Conf. Dig., Dec. 2000, pp. 888–894.
[16] J.-Y. Kim and H.-Y. Lee, “Wideband and compact bandstop filter structure using double-plane superposition,” IEEE Microw. Wireless Compon. Lett, vol. 13, no. 7, pp. 279–280, Jul. 2003.
[17] Yabuki H., Sagawa M., Matsuo M., Makimoto M.: ’Stripline dual-mode ring resonators and their application to microwave devices’ IEEE Trans. Microw. Theory Tech., 1996, 44, PP. 723-729
[18] Lung-Hwa Hsieh., Kai Chang.: ‘Compact, low insertion-loss, sharp-rejection, and wide-band microstrip bandpass filters’ IEEE Trans. Microw. Theory Tech., 2005, 53, PP. 861-867
[19] Wei Tong, and Hu, Z.R, ”Compact Left-handed Dual Mode Notch Bandstop Filter,” IEEE MTT-S INT. MICROW. Symp. Dig., 2006, 2, PP. 1261-1264
[20] Guyette, A.C., Hunter, I.C., Pollard, R.D., and Jachowski, D.R, “Perfectly-matched bandstop filters using lossy resonators,” IEEE MTT-S INT. MICROW. Symp. Dig., 2005, PP. 517-520
[21] Jia-Sheng Hong, “Microstrip dual-mode band reject filter,” IEEE MTT-S INT. MICROW. Symp. Dig., 2005, PP. 945-948
[22] Sheen J.-W, “A compact semi-lumped low-pass filter for harmonics and spurious suppression,” IEEE Microw. Wirel. Compon. Lett., 2000, 10, (3), PP. 92-93
[23] Amari S, “Direct synthesis of folded symmetric resonator filters with source-load coupling, “ IEEE Microw. Wirel. Compon. Lett., 2001, 11, (6), PP. 264-266
[24] L. K. Yeung and K.-L. Wu, “A compact second-order LTCC bandpass filter with two finite transmission zeros,” IEEE Trans. Microw. Theory Tech., vol. 51, no. 2, pp. 337–341, Feb. 2003.
[25] C.-W. Tang, Y.-C. Lin, and C.-Y. Chang, “Realization of transmission zeros in combline filters using an auxiliary inductively coupled ground plane,” IEEE Trans. Microw. Theory Tech., vol. 51, no. 10, pp. 2112–2118, Oct. 2003.
[26] C.-F. Chang and S.-J. Chung, “Bandpass filter of series configuration with two finite transmission zeros using LTCC technology,” IEEE Trans. Microw. Theory Tech., vol. 53, no. 7, pp. 2383–2388, Jul. 2005
[27] C. W. Tang and S. F. You, “Concurrent design methodologies of LTCC bandpass filters, diplexer, and triplexer with transmission zeros,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 2, pp. 717–723, Feb. 2006.
[28] Y.-H. Chun, J. S. Hong, P. Bao, T. J. Jackson, and M. J. Lancaster,“BST-varactor tunable dual-mode filter using variable ZC transmission line,” IEEE Microw. Wireless Compon. Lett., vol. 18, no. 3, pp.167–169, Mar. 2008.
[29] B. Lui, F. Wei and X. Shi, “Switchable bandpass filter with two-state frequency responses,” Electronics. Lett., vol. 47, no. i, 6th January. 2011.
[30] C.-Y. Hsu, H.-R. Chuang, and C.-Y. Chen, “Design of 60-GHz millimeter-wave CMOS RFIC-on-chip bandpass filter,” in Proc. 37th Eur. Microw. Conf., Oct. 2007, pp. 672–675.
[31] D. M. Pozar, Microwave engineering, 2nd ed. New York: Wiley, 1997.
[32] D. K. Shaeffer and S. Kudszus "Performance-optimized microstrip coupled VCOs for 40-GHz and 43-GHz OC-768 optical transmission", IEEE J. Solid-State Circuits, vol. 38, pp. 1130 2003.
[33] Shi, D., East, J., and Flynn, M.P, ”A Compact 5 GHz standing-wave resonator-based VCO in 0.13-μm CMOS,” IEEE Radio Frequency Integrated Circuits Symp., Honolulu, HI, USA, June 2007, pp. 591–594
[34] Jun-Chau, Chien., and Liang-Hung, Lu, “Design of wide-tuning-range millimeter-wave CMOS VCO with a standing-wave architecture,” IEEE J. Solid-State Circuits, 2007, 42, (9), pp. 1942–1952
[35] Hsien-Ku, Chen., Hsien-Jui, Chen., Da-Chiang, Chang., Ying-Zong, Juang., and Shey-Shi, Lu, “A 0.6 V, 4.32 mW, 68 GHz low phase-noise VCO with intrinsic-tuned technique in 0,13,” IEEE Microw. Wirel. Compon. Lett., 2008, 18, (7), pp. 467-469
[36] Plouchart, J.-O., Zamdmer, N., Trzcinski, R., Kun Wu, Gross, B.J., and Moon Kim, “A 44 GHz differentially tuned VCO with 4 GHz tuning range in 0.12 μm SOI CMOS,” IEEE ISSCC Conf. Tech. Dig., February 2005, pp. 416–607
[37] Ming, Li., and Amaya, R.E, “Design of mM-W Fully Integrated CMOS Standing-Wave VCOs Using Low-Loss CPW Resonators,” IEEE Trans., on Circuits and Systems II: Express Briefs, 2012, 59, (2), pp. 72-82.
[38] J. Quirarte and J. Starski, “Novel Schiffman phase shifters,” IEEE Trans. Microw. Theory Tech., vol. 41, no. 1, pp. 9–14, Jan. 1993.
[39] Y. Guo, Z. Zhang, and L. Ong, “Improved wideband Schiffman phase shifter,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 3, pp.1196–1200, Mar. 2006.
[40] WIN Semiconductor Corporation [Online]. Available: http://www. winfoundry.com/
[41] C. Lugo, and J. Papapolymerou, “Dual mode reconfigurable filter with asymmetrical transmission zeros and center frequency control,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 9, pp. 499–501, Sep. 2006.
[42] W.-T. Tu, and K. Chang, “Piezoelectric transducer-controlled dual-mode switchable bandpass filter,” IEEE Microw. Wireless Compon. Lett., vol. 17, no. 3, pp. 199–201, Mar. 2007.
[43] M.F. Karim, A.Q. Liu, A. Alphones, and A.B. Yu, “A Reconfigurable Micromachined switching filter using periodic structures,” IEEE Trans. Microw. Theory Tech., vol. 55, no. 6, pp.1154–1162, June 2007.
[44] W. H. Tu, “Switchable microstrip bandpass filters with reconfigurable on-state frequency responses,” IEEE Microw. Wireless Compon. Lett., vol. 20, no. 5, pp. 259–261, May 2010.
[45] M.F. Karim, Yong-Xin Guo, Z.N. Chen, and L.C. Ong, “Miniaturized reconfigurable and switchable filter from UWB to 2.4 GHz WLAN using PIN diodes”, IEEE International Microwave Symposium Dig., Boston, USA, PP. 509 – 512, June 2009.
[46] H. Shaman, and J.-S. Hong, “Input and output cross-coupled wideband bandpass filter,” IEEE Trans. Microw. Theory Tech., vol. 55, no. 12, pp. 2562–2568, Dec 2007.
[47] E. Park and C. Seo, “Low phase noise oscillator using microstrip square open loop resonator,” IEEE MTT-S Int. Microw. Symp. Dig., pp. 585 2006.
[48] Jonghoon Choi. Nick, M. Mortazawi, “Low Phase-Noise Planar Oscillators Employing Elliptic-Response Bandpass Filters,” IEEE Trans. Microw. Theory Tech., vol. 5, no. 8, pp. 1959 - 1965, Aug. 2009.
[49] H. Kim, S. Ryu, Y. Chung, J. Choi, and B. Kim, “A low phase-noise CMOS VCO with harmonic tuned LC Tank,” IEEE Trans. Microw. Theory Tech., vol.54, no.7, pp. 2917-2924, July 2006.
[50] J. Choi, and C. Seo, “Low phase noise VCO using output matching network based on novel harmonic control circuit,” Microwave and Optical Technology Letters, vol.51, no.8, pp. 1838-1842, August 2009.
[51] Q. Xue, K. M. Shum, and C. H. Chan, “Novel oscillator incorporating a compact microstrip resonant cell,” IEEE Microwave and Wireless Components Letters, vol. 11, pp. 202-204, May 2001.
[52] J. Shi, J. X. Chen, and Q. Xue, “A differential voltage-controlled integrated antenna oscillator based on double-sided parallel-strip line,” IEEE Trans. Microw. Theory Tech., vol. 56, no. 10, pp. 2207–2212, Oct. 2008.
[53] S. Wu, and B. Razavi, “A 900-MHz/1.8 GHz CMOS receiver for dual band applications,” IEEE J. Solid-State Circuits, vol. 33, no. 12, pp. 2178-2185, May 1998.
[54] K. R. Rao, J. Wilson, and M. Ismail, “A CMOS RF front-end for a multi standard WLAN receiver,” IEEE Microw. Wireless Compon. Lett., vol. 15, no. 5, pp. 321-323, May 2005.
[55] H. Song, H. Kim, J. Choi, C. Park, and B. Kim, “A sub-2 dB NF dual-band CMOS LNA for CDMA/WCDMA applications,” IEEE Microwave Wireless Comp. Lett., vol. 18, no. 3, pp. 212-214, Mar. 2008.
[56] L. H. Lu, H. H. Hsieh, and Y. S. Wang, “A compact 2.4/5.2 GHz CMOS dual-band low-noise amplifier,” IEEE Microw. Wireless Compon. Lett., vol. 15, no. 10, pp. 685-687, Oct. 2005.
[57] H. S. Jhon, I. Song, J. Jeon, H. Jung, M. Koo, B. G. Park, J. D. Lee, and H. Shin, “8mW 17/24 GHz dual-band CMOS low-noise amplifier for ISM-band application,” Electron. Lett., vol. 44, no. 23, pp. 1353-1354, Nov. 2008.
[58] M. Chen, and J. Lin, “A 0.1-20 GHz Low-Power Self-Biased Resistive-Feedback LNA in 90 nm Digital CMOS,” IEEE Microw. Wireless Compon. Lett., vol. 19, no. 5, pp. 323-325, May 2009.
[59] T. Chang, J. Chen, L. A. Rigge, and J. Lin, “A packaged and ESD-protected inductorless 0.1-8 GHz wideband CMOS LNA,” IEEE Microw. Wireless Compon. Lett., vol. 18, no. 6, pp. 416-418, Jun. 2008.
[60] C. W. Kim, M. S. Kang, P. T. Anh, H. T. Kim, and S. G. Lee, “An ultra-wideband CMOS low noise amplifier for 3-5 GHz UWB system,” IEEE J. Solid-State Circuits, vol. 40, no. 2, pp. 544-547, Feb. 2005.
[61] A. Ismail, and A. Abidi, “A 3 to 10 GHz LNA using a wideband LC-ladder matching network,” in IEEE ISSCC Dig. Tech. Papers, 2004, pp. 384-385.
[62] A. Bevilacqua, and A. M. Niknejad, “An ultra-wideband CMOS LNA for 3.1 to 10.6 GHz wireless receiver,” in IEEE ISSCC Dig. Tech. Papers, 2004, pp. 382-383.
[63] F. Zhang, and P. R. Kinget, “Low-power programmable gain CMOS DA,” IEEE J. Solid-State Circuits., vol. 41, no. 6, pp. 1333-1343, Jun. 2006.
[64] Y. H. Yu, Y. J. Chen, and D. Heo, “A 0.6-V low power UWB CMOS LNA,” IEEE Microw. Wireless Compon. Lett., vol. 17, no. 3, pp. 229-231, Mar. 2007.
[65] Y. Shim, C. W. Kim, J. Lee, and S. G. Lee, “Design of full band UWB common-gate LNA,” IEEE Microw. Wireless Compon. Lett., vol. 17, no. 10, pp. 721-723, Oct. 2007.
[66] K. H. Chen, J. H. Lu, B. J. Chen, and S. I. Liu, “An ultra-wide-band 0.4-10-GHz LNA in 0.18 um CMOS,” IEEE Trans. Circuits Syst. II, vol. 54, no. 3, pp. 217-221, Mar. 2007.
[67] C. F. Liao, and S. I. Liu, “A broadband noise-canceling CMOS LNA for 3.1-10.6-GHz UWB receivers,” IEEE J. Solid-State Circuits, vol. 42, no. 2, pp. 329-339, Feb. 2007.
[68] G. Matthaei, L. Young, and E. T. Jones, “Microwave Filters, Impedance-Matching Networks, and Coupling Structures,” Norwood, MA. Artch House, 1980.
[69] C. H. Chen, M. J. Deen, Y. Cheng, and M. Matloubian, “Extraction of the induced gate noise, channel noise, and their correlation in submicron MOSFETs from RF noise measurements,” IEEE Trans. Electron Devices, vol. 48, no. 12, pp. 2884-2892, Dec. 2001.
[70] Y. Lu, K. S. Yeo, A. Cabuk, J. Ma, M. A. Do, and Z. Lu, “A novel CMOS low-noise amplifier design for 3.1 to 10.6 GHz ultra-wide-band wireless receivers,” IEEE Trans. Circuits Syst. I, vol. 53, no. 8, pp. 1683-1692, Aug. 2006.
[71] D. K. Shaeffer, and T. H. Lee, “A 1.5-V, 1.5-GHz CMOS low noise amplifier,” IEEE J. Solid-State Circuits, vol. 32, no. 5, pp. 745-759,May 1997.
[72] A. J. Scholten, H. J. Tromp, L. F. Tiemeijer, R. V. Langevelde, R. J. Havens, P. W. Vreede, R. F. Roes, P. H. Woerlee, A. H. Montree, and D. B. Klaassen, “Accurate thermal noise modeling for deep-submicron CMOS,” in IEDM Tech. Dig., 1999, pp. 155-158.
[73] A. J. Scholten, L. F. Tiemeijer, R. V. Langevelde, R. J. Havens, A. T. A. Zegers-van Duijnhoven, and V. C. Venezia, “Noise modeling for RF CMOS circuit simulation,” IEEE Trans. Electron Devices, vol. 50, no. 3, pp. 618-632, Mar. 2003.
[74] W. C. Huang, C. M. Hsu, C. M. Lee, H. Y. Huang, and C. H. Luo, “Dual band LNA/mixer using conjugate matching for implantable biotelemetry,” IEEE International Symp, 2008, pp. 1764-1767.
[75] Yu. M. Ward, R.J. Newgard, R.A. Urteaga, M, “A compact 43-GHz monolithic differential VCO in 0.5-μm InP DHBT technology,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 5, pp. 281-283, May. 2006.
[76] M. Sanchez-Renedo, “High-selectivity tunable planar combline filter with source/load-multiresonators coupling,” IEEE Microw. Wireless Compon. Lett., vol. 17, no. 7, pp. 513–515, Jul. 2007.
[77] M. A. El-Tanani and G. M. Rebeiz, “Corrugated microstrip coupled lines for constant absolute bandwidth tunable filters,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 4, pp. 956–963, Apr. 2010.
[78] A. I. Abunjaileh and I. C. Hunter, “Tunable bandpass and bandstop filters based on dual-band combline structures,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 12, pp. 3710–3719, Dec. 2010.
|