大型犬人工髖關節之應力分析

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：50

、訪客IP：3.21.231.245

姓名

楊子欣(Tzn-Hsin Yang) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

大型犬人工髖關節之應力分析
(Stress Analysis of the Canine Femoral Prosthesis)

相關論文

★ 高彎曲度之人工膝關節多軸向動態磨耗試驗機開發	★ 人工髖關節雙軸向動態磨耗試驗平台開發
★ 人體膝關節之高度彎曲電腦動態實體模型的建立	★ 足型與足壓電腦輔助分析系統開發
★ 超低溫液態氮生物試片儲存槽的研發	★ 腰椎人工椎間盤之運動軌跡分析
★ 表面置換型人工臏股骨關節的設計與分析	★ 二維及三維足型的應用與高跟鞋足壓的量測分析
★ 心血管支架塑性成形的有限元素分析	★ 靜態穿椎弓足內固定器之剛性對腰椎受力之影響
★ 腰椎內固定器之動態型式的生物力學評估	★ 超低溫高安全性生物試片儲存槽與即時監管理系統之開發
★ 超低溫液態氮生物試片儲存系統的硬體研發	★ 拇趾外翻足的鞋內矯正器之設計與評估
★ 表面置換型單髁人工膝關節的設計與分析	★ 髕股骨人工關節之動靜態分析與測試

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

在不同動作時犬股骨的應力分佈資訊對獸醫執行手術及工程師設計植入物時是非常重要的，以有限元素法來分析應力及評估人工髖關節之優劣是目前常見的方式，因此，本研究希望能建立一完整的3D黃金獵犬股骨實體模型，且探討植入物（林上智老師設計）在植入後其股骨的應力分佈情形，並與完整股骨做比較，藉此評估此人工髖關節在臨床上的可行性，並作為日後手術或其他學術研究的參考。
首先利用Armira軟體讀取黃金獵犬股骨CT斷層掃描影像並建立實體模型，透過SolidWork軟體讀取模型在模擬手術植入人工股骨柄，最後利用Cosmos做有限元素分析，而Cosmos可以直接針對組合模型生成實體網格。
由分析的結果得知，在完整股骨的應力分佈情形上，股骨會產生一向股骨後側旋轉之扭力與向股骨前側彎曲之彎矩，且在幹中間遠端方向有較高應力發生，而術後股骨應力分佈情形趨勢上與原完整股骨差異不大，此外，就植入物而言，最大的張應力在股骨柄後側孔洞位置產生，但並不會造成股骨柄的損壞，可提供臨床上一植入物的選擇。

摘要(英)

Information regarding the stresses and strains in the canine femur during various activities is important for veterinary orthopeadic surgeons, engineers designing implants for dogs. Finite element analysis has commomly been used to investigate the effect of stress distribution following hip replacement. Therefore, the objective of the current study is to reconstruct the three-dimensional solid model of GOLDEN RETRIEVER and investigate the biomechanical performance of a prosthesis（designed by Dr. Lin）by comparing the stress distributions with the intact canine femur. Assess this prosthesis and face the feasibility in clinic, is regarded as the reference of future operation or other academic research by this.
An image-processing software（Armira）was used to process the sectional computed tomography images of a GOLDEN RETRIEVER femur and to reconstruct the solid model of the bone. Then the solid model of the bone was transferred to a CAD program（Soliworks）to simulate the implantation of a hip prosthesis. Finally, the finite element analysis was performed using a finite element package（Cosmos）with the proper setting of boundary and losding conditions.
The results can be summarized as : the torsion and the bending moment was occurred on the femur and the peak effective stress was reached at the caudo-medial diaphysis. We found that the implanted femur has physiological stress distribution on the intact femur. Furthermore, as far as prosthesis be concerned the peak tensile stress occurred in the hole of the posterior diaphysis. Nevertheless, the prosthesis was not broken. It can provide immediate stabilization of the implant and the preservation of endosteal vascularity.

關鍵字(中)

★ 應力
★ 犬股骨
★ 人工髖關節
★ 有限元素分析

關鍵字(英)

★ Canine femur
★ Stress
★ Prosthesis
★ Finite element analysis

論文目次

摘要 I
Abstract II
致謝文 III
目錄 IV
圖目錄 VI
表目錄 VIII
第一章：緒論 1
1-1 研究動機與目的 1
1-2 研究背景 2
1-2-1 CAD模型建立與有限元素前處理 2
1-2-2 人工股骨柄 6
1-3 犬之髖關節解剖學與病理學 8
1-3-1 犬之髖關節解剖學 8
1-3-2犬之髖關節病理學 9
1-3-2-1犬髖關節退化症(Canine hip dysplasia) 9
1-3-2-2 髖關節疾病的臨床徵狀 10
1-3-2-3 髖關節疾病的診斷－PennHip Technique 12
1-3-2-4 髖關節疾病的手術治療 14
1-4 犬之人工髖關節置換 17
1-4-1 植入物固定系統比較 17
1-5 本文架構 18
第二章：材料與方法 20
2-1 研究流程 20
2-2 犬股骨模型建立 22
2-3 CAD軟體模擬手術 25
2-4 Cosmos有限元素分析 30
2-4-1 材料性質 31
2-4-2 受力、邊界與介面條件設定 33
第三章：結果 36
3-1 完整股骨有限元素分析結果 36
3-2 術後股骨與植入物之有限元素分析結果 39
第四章：討論 44
4-1 Amira模型的建立 44
4-2 有限元素分析部分 46
第五章：結論與未來展望 49
5-1 結論 49
5-2 未來展望 49
參考文獻 50

參考文獻

〔1〕 Stasa, F.L., 1984. Applied Finite Element Analysis for Engineers,Saunders College Publishing,Harcourt Brace.
〔2〕 Brekelmans, W.A.M., Poort, H.W.,Slooff, T.J.J.H.,1972.A New Method to Analysis the Mechanical Behaviour of Skeletal Parts.Acta Orthopaedica Scandinavica 43,301-317
〔3〕 Yerry, M.A., Shephard, M.S., 1984. Automatic Three-Dimensional Mesh Generation by the Modified Octree Technique. International Journal for Numerical Methods in Engineer 20,1965-1990.
〔4〕 Prendergas, P.J. and Taylor, D., 1990. Stress Analysis of the Proximo-medial Femur after Total Hip Replacement. Journal of Biomechanical Engineering 12.
〔5〕 Breau, C., Shirazi-Adl, A., 1990. Reconstruction of A Human Ligamentous Lumber Spline Using CT Image-A Three-Dimensiona Finite Element Mesh Generation. Annals of Biomedical Engineering. 19,291-302.
〔6〕 Skinner, H.B., Kim, A.S., Keyak, J.H., Mote, C.D., 1994.Femoral Prosthesis Implantation Induces Changes in Bone Stress that Depend on the Extent of Porous Coating. Journal of Othopaedic Research. 12,553-563.
〔7〕 Mann K.A., Bartel D.L., Wright T.M., Burstein A.H., 1995. Coulomb Frictional Interfaces in Modeling Cemented Total Hip Replacement: a More Realistic Model. Journal of Biomechanics. 9,1067-1078.
〔8〕 Zannoni, C., Mantovani, R., Viceconti, M., 1998. Material Properties Assignment to Finite Element Method of Bone Structure-A New Method. Medical Engineering and Physics 20, 735-740.
〔9〕 Viceconti, M., Zannoni, C. and Cappello, A.D., 1999. A New Method for the Automatic Mesh Generation of Bone Segments from CT Date. Journal of Medical Engineering and Technology 23, 77-81.
〔10〕顏秀崗（1998）,披覆ZrO2陶瓷膜於人工髖關節植入材Co-Cr-Mo之研究,中華民國八十七年國科會醫學工程學門研究成果發表會論文集,307-310.
〔11〕 Sumner, D.r., Turner, T.M., Igloria, R., Urban, R.M., Galante, J.O., 1998. Functional adaptation and ingrowth of bone vary as a function of hip implant stiffness. Journal of Biomechanics 31, 909-917.
〔12〕 Bryan, J.M., Sumner, D.R., Hurwitz, D.E., Tompkins, G.S., Andriacchi, T.P., Galante J.O., 1996. Altered load history affects periprosthetic bone loss following cementless total hip arthroplasty. Journal of Orthopaedic Research 14, 762-768.
〔13〕 Pritchett, J.W., 1995. Femoral bone loss following hip replacement. A comparative study. Clinical Orthopeadics 314, 156-161.
〔14〕 http://www.pennhip.org/
〔15〕 Hibbeler, R.C. Mechanics of Materials, third edition, Upper Saddle River, NJ, Prentice Hall. 120-121.
〔16〕 H. Weinans et al. 2000. Sensitivity of periprosthetic stress-shielding to load and the bone density-modulus relationship in subject-specific finite element models. Journal of Biomechanics 33, 809-817.
〔17〕 R.Shahar et al. 2003. Stress and strain distribution in the intac canine femur：finite element analysis. Medical Engineering & Physics 25 387-395

指導教授

鄔蜀威、林上智
(Shu-Wei Wu、Shang-Chih Lin)

審核日期

2007-7-21

推文