吸附式空調系統之微鰭板蒸發/冷凝器凝結熱傳增強性能研究

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：80

、訪客IP：3.146.255.127

姓名

黃威智(Wei-Chih Huang) 查詢紙本館藏

畢業系所

能源工程研究所

論文名稱

吸附式空調系統之微鰭板蒸發/冷凝器凝結熱傳增強性能研究
(Experimental investigation and heat transfer enhanced performance analysis on micro-fins evaporator/condenser of an adsorption air conditioning system)

相關論文

★ 不同集管型式多流道熱交換器流動分佈研究	★ 冷媒R-245fa於不同石墨烯塗佈鰭管上凝結熱傳性能之實驗分析
★ 低溫熱管設計及性能研究	★ 平板震盪型熱管均熱片研究
★ 薄矽膠層吸附床之性能研究	★ 小型吸附式空調系統研究
★ 變頻空調機在不同環境下之控制策略	★ 水-空氣在板式熱交換器內的流動觀察
★ 以紅外線熱像分析冷媒R410A在板式熱交換器內之蒸發熱傳性能	★ 不同粒徑微多孔表面在狹小空間內之池沸騰熱傳性能研究
★ 梯形流道表面之池沸騰熱傳性能研究	★ 石墨烯塗佈銅管外凝結熱傳性能研究
★ 超臨界R-410A與R-32熱傳及壓降性能之研究	★ 製冷劑R-245fa在石墨烯塗層中的冷凝傳熱整體翅片管
★ 不同性能風扇對熱傳增強鰭片之性能研究	★ 使用FAM Z05沸石對水之小型吸附式空調性能研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

本研究主要目的為設計一新型式的蒸發/冷凝熱交換器，以供未來固體吸附式製冷系統使用；並在熱交換器的鰭片上做微溝槽結構產生表面張力來達到熱傳增強之效果。本實驗係測試兩種不同熱交換器，分別為平板鰭片與微溝槽鰭片熱交換器來作比較，實驗結果發現有微溝槽結構之熱交換器能達到較好的凝結熱傳性能，並證實了表面張力在凝結時之熱傳增強的效果。
此外，由於固體吸附式製冷系統運作時處於低壓的狀態，故本實驗亦研究在不同飽和溫(壓)下時，其凝結熱傳係數所受之影響，發現熱傳係數會隨著凝結飽和溫的下降而降低。

摘要(英)

The main purpose of this research is to design a new kind of evaporator/condenser heat exchanger, which is applied to an integrated, one-bed, closed-type adsorption air conditioning system. The micro-fin were manufactured on this heat exchanger to bring the surface tension in order to heat transfer enhanced. This research will test two kinds of different heat exchangers, one is with micro-fins and another is plain-fins. In compare of the experiment results of these two heat exchangers, we found that evaporator/condenser heat exchanger with micro-fin have higher heat transfer performance. This result proved that the surface tension can increase heat transfer.
Besides, this research also experimented on different condense temperature. We found that with the decrease in condense temperature, the heat transfer coefficient would also decrease.

關鍵字(中)

★ 固體吸附式製冷
★ 蒸發/冷凝器
★ 微鰭板
★ 表面張力

關鍵字(英)

★ surface tension.
★ micro-fins
★ evaporator/condenser
★ Adsorption air conditioning system

論文目次

目錄
頁次
摘要------------------------------------------------------i
英文摘要-------------------------------------------------ii
目錄 ---------------------------------------------------iii
表目錄 --------------------------------------------------iv
圖目錄 ---------------------------------------------------v
符號說明-----------------------------------------------viii
第一章前言-------------------------------------------1
1.1 研究背景----------------------------------------1
1.2 研究目的----------------------------------------3
第二章文獻回顧---------------------------------------7
2.1 分離式------------------------------------------------7
2.2 一體式------------------------------------------------9
2.3 一體式蒸發/冷凝設計概念 -----------------------------13
2.4 凝結熱傳增強 ----------------------------------------14
第三章實驗方法--------------------------------------30
3.1 簡介 ------------------------------------------------30
3.2 實驗系統構造 ----------------------------------------31
3.2.1 測試段 --------------------------------------------31
3.2.2 冷媒循環系統 --------------------------------------31
3.2.3 水循環系統 ----------------------------------------32
3.3 實驗量測設備 ----------------------------------------32
3.3.1 溫度量測 ------------------------------------------32
3.3.2 流量量測 ------------------------------------------33
3.3.3 壓力量測-------------------------------------------34
3.3.4 資料擷取系統---------------------------------------34
3.4 實驗過程---------------------------------------------34
3.4.1 系統測漏-------------------------------------------35
3.4.2 系統冷媒填充---------------------------------------35
3.4.3 實驗步驟-------------------------------------------35
3.5 資料換算 (data reduction)----------------------------36
第四章實驗結果與討論--------------------------------56
4.1 平板鰭片實驗結果分析.--------------------------------56
4.2 微溝槽鰭片實驗結果分析.------------------------------57
4.3 綜合實驗結果分析.------------------------------------58
第五章結論------------------------------------------70
參考文獻-------------------------------------------------72
附錄-----------------------------------------------------75

參考文獻

參考文獻
Boubakri, 2003,“A new conception of an adsorptive solar-powered ice maker,” Renewable Energy, Vol. 28, pp. 831-842.
Boubakri, 2006,“Performance of an adsorptive solar ice maker perating with a single double function heat exchanger,” Renewable Energy, Vol. 31, pp. 799-1812.
Chamra, L. M., and Webb, R. L., 1996,“Aavanced micro-fin tubes for
Condensation,” Int. J. Heat Mass Transfer, Vol. 39, pp. 1839-1846.
Chang, W.-S., and Wang, C.-C., and Shieh C.-C., 2005,“Experimental
study of a solid adsorption cooling system using flat-tube heat
exchangers as adsorption bed,” Applied Thermal Engineering, Vol.
27, pp. 2195-2199.
Chua, H. T., and Ng, K. C., and Malek, A., and Kashiwagi, T., and
Akisawa, A., and Saha, B. B., 1999,“Modeling the performance of
two-bed, sillica gel-water adsorption chillers,” International Journal
of Refrigeration, Vol. 22, pp. 194-204.
Gartler, G., and Dagmar, J., and Purkarthofer, G., and Wagner, W., 2004,
“Development of a High Energy Density Sorption Storage System,”
Proceeding of the Eurosun Conference, Freiburg, Germany.
Kim, N.-H., and Cho, J.-P., and Kim, J.-O., and Youn, B., 2003,
“Condensation heat transfer of R-22 and R410-A in flat aluminum
multi-channel tubes with or without micro-fins,” International
Journal of Refrigeration, Vol. 26, pp. 830-839.
Nualboonrueng, T., and Kaewon, J., and Wongwises, S., 2003,
“Two-phase condensation heat transfer coefficients of HCF-134a at
high mass flux in smooth and micro-fin tubes,” Int. Comm. Heat
Mass Transfer, Vol. 30, pp. 577-590.
Oertel, K., and Fischer, M., 1998,“Adsorption cooling system for cold
storage using methanol/silicage,” Applied Thermal Engineering,
Vol. 18, pp. 773-786.
Saha, B. B., and Koyama, S., and Kashiwagi, T., and Akisawa, A., and
Ng, K. C., and Chua, H. T., 2003,“Waste heat driven dual-mode,
multi-stage, multi-bed regenerative adsorption system,” International
Journal of Refrigeration, Vol. 26, pp. 749-757.
Yang, C.-Y., and Webb, R. L., 1996,“Condensation of R-12 in small
hydraulic diameter extruded aluminum tubes with and without
micro-fins,” Int. J. Heat Mass Transfer, Vol 39, pp. 791-800.
Yang, C.-Y., and Fan, C.-F., and Chang F.-P., 2002,“Effect of Fin Tip
Radius for Film Condensationon Micro-Fin Surfaces,” Journal of
Enhanced Heat Transfer, Vol. 10, pp. 199-209.
Yasuo, Y., and Masao, M., and Kenzo, O., 1987,”Adsorption Heat Pipe
And Adsorption Refrigeration Machine Using This Adsorption Heat
Pipe,” Patent No.: JP 01-054181.
Yauso, Y., and Toshiya, O.,and Shinichi, O., 1989,”Adsorption Type Heat
Storage Device And Adsorption Type Heat Storage System With The
Same Device,” Patent No.: JP 03-091660.
王智正，2005，太陽能置冷系統發展，國科會期中報告，pp. 31-38。
鄭喬鴻，2005，微鰭管應用於吸附空調系統蒸發/冷凝器之性能實驗
探討，國立台北科技大學冷凍空調工程系碩士學位論文，台北。

指導教授

楊建裕(Chien-Yuh Yang)

審核日期

2009-7-24

推文