參考文獻 |
[1] G. R. Hopkinson, T. M. Goodman and S. R. Prince, A guide to the use and calibration of detector array equipment, SPIE Press – The International Society for Optical Engineering, 2004.
[2] E. Hecht, Optics, the 4th Edition, Addison Wesley Longman Publishing Co. Inc., 2001.
[3] C. K. Chua, K. F. Leong and C. S. Lim, Rapid prototyping: principles and applications, the 2nd Edition, World Scientific Publishing Co. Pte. Ltd., 2003.
[4] 邱至意「3D曲面模型網格化之研究,國立中央大學機械工程研究所碩士論文,民國九十一年。
[5] 蔡耀震,逆向工程之曲面連續性理論與曲面模型自動化重建技術發展,國立中央大學機械工程研究所博士論文,民國九十八年。
[6] L. A. Piegl and A. M. Richard, “Tessellating trimmed NURBS surfaces”, Computer-Aided Design, Vol. 27, No. 1, pp. 16-26, 1995.
[7] L. A. Piegl and W. Tiller, “Geometry-Based triangulation of trimmed NURBS Surfaces”, Computer-Aided Design, Vol. 30, No. 1, pp. 11-18, 1998.
[8] W. Cho, N. M. Patrikalakis and J. Peraire, “Approximate development of trimmed patches for surface tessellation”, Computer-Aided Design, Vol. 30, No. 14, pp. 1077-1087, 1998.
[9] W. Cho, T. Maekawa, N. M. Patrikalakis and J. Peraire, “Robust tessellation of trimmed rational B-spline surface patches”, Computer Graphics International, pp. 543-555, 1998.
[10] N. Litke, A. Levin and P. Schröder, “Trimming for subdivision surfaces”, Computer-Aided Geometric Design, Vol. 18, No. 5, pp. 463-481, 2001.
[11] S. Kumar and D. Manocha, “Efficient rendering of trimmed NURBS surfaces”, Computer-Aided Design, Vol. 27, No. 7, pp. 509-521, 1995.
[12] S. Kumar, “Robust incremental polygon triangulation for fast surface rendering”, WSCG'2000: The 8th International Conference in Central Europe on Computer Graphics, visualization and computer vision, vol. 8, No.1, 2000.
[13] H. Sadoyan, A. Zakarian, V. Avagyan and P. Mohanty, “Robust uniform triangulation algorithm for computer aided design”, Computer-Aided Design, Vol. 38, No. 10, pp. 1134-1144, 2006.
[14] L. Velho, L. H. De Figueiredo and J. Gomes, “A unified approach for hierarchical adaptive tessellation of surfaces”, ACM Transactions on Graphics, Vol. 18, No. 4, pp. 329-360, 1999.
[15] M. L. Alday, “Implicit surface triangulation”, Tik-111.500 Seminar on Computer Graphics, Helsinki University of Technology, 2003.
[16] W. E. Lorensen and H. E. Cline, “Marching cubes: a high resolution 3D surface construction algorithm”, ACM SIGGRAPH Computer Graphics, Vol. 21, No. 4, pp. 163-169, 1987.
[17] L. Yu, X. Jin, Y. Zhao, J. Feng and Q. Peng, “Fast tessellation for implicit surfaces”, Computer Engineering and Applications, Vol. 41, No.2, 2005.
[18] J. Bloomenthal, “Polygonization of implicit surfaces”, Computer aided geometry design, pp.341-355, 1988.
[19] M. A. Yerry and M. S. Shephard, “A modified quadtree approach to finite element mesh generation”, IEEE Computer Graphics and Applications, Vol. 3, No. 1, pp. 39-46, 1983.
[20] J. Vörös, “A strategy for repetitive neighbor finding in images represented by quadtrees”, Pattern Recognition Letters, Vol. 18, No. 10, pp. 955-962, 1997.
[21] A. Watt, 3D computer graphics, the 3rd Edition, Addison Wesley Longman Publishing Co. Inc., 2000.
[22] K. Lee, Principles of CAD/CAM/CAE Systems, Addison Wesley Longman Publishing Co. Inc., 1999.
[23] Y. C. Huang and J. Y. Lai, “A fast error comparison method for massive STL data”, Advances in Engineering Software, Vol. 39, No. 12, pp. 962-972, 2008.
[24] B. K. Choi, Surface modeling for CAD/CAM, ELSEVIER Science Publishers B.V., 1991.
[25] A. Guéziec, G. Taubin, F. Lazarus and B. Horn, “Cutting and stitching: converting sets of polygons to manifold surfaces”, IEEE Transactions on Visualization and Computer Graphics, Vol. 7, No. 2, pp. 136-151, 2001.
[26] V. Settgast, K. Müller, C. Fünfzig and D. Fellner, “Adaptive tessellation of subdivision surfaces”, Computers & Graphics, Vol. 28, No. 1, pp. 73-78, 2004.
[27] D. Reiners, G. Voß, J. Behr, “OpenSG: basic concepts”, Proceedings of the OpenSG Symposium, 2002.
[28] G. Barequet, C. A. Duncan and S. Kumar, “RSVP: A geometric toolkit for controlled repair of solid models”, IEEE Transactions on Visualization and Computer Graphics, Vol. 4, No. 2, 1998.
[29] H. T. Yau, C. C. Kuo and C. H. Yeh, “Extension of surface reconstruction algorithm to the global stitching and repairing of STL models”, Computer-Aided Design, Vol. 35, No. 5, pp. 477-486, 2003.
[30] H. Chiyokura, Solid modeling with designbase: theory and implementation, Addison Wesley Longman Publishing Co., Inc., 1988.
[31] H. Toriya and H. Chiyokura, 3D CAD principles and applications, Springer-Verlag, 1993.
[32] R. Radovitzky and M. Ortiz, “Tetrahedral mesh generation based on node insertion in crystal lattice arrangements and advancing-front-delaunay triangulation”, Computer methods in applied mechanics and engineering, Vol. 187, No. 3-4, pp. 543-569, 2000.
[33] M. Freytag and V. Shapiro, “B-Rep SE: simplicially enhanced boundary representation”, Proceedings of the Ninth ACM Symposium on Solid Modeling and Applications, Genova, Italy, pp. 157-168, 2004.
[34] 鄒李森,數位幾何模型與類比幾何模型之轉換與應用,國立中正大學機械工程研究所碩士論文,民國九十一年。
[35] I. J. Schoenberg, “Contributions to the problem of approximation of equidistant data by analytic functions”, Quarterly of Applied Mathematics, Vol. 4, pp. 45-99 and 112-141, 1946.
[36] L. J. Doctor and J. G. Torborg, “Display techniques for octree-encoded objects”, IEEE Computer Graphics and Applications, Vol. 1, No. 3, pp. 29-38, 1981.
[37] M. A. Yerry and M. S. Shephard, “Automatic three dimensional mesh generation by the modified-octree technique”, International Journal for Numerical Methods in Engineering, Vol. 20, No. 11, pp. 1965-1990, 1984.
[38] S. S. Yeh and P. L. Hsu, “Adaptive-feedrate interpolation for parametric curves with a confined chord error”, Computer-Aided Design, Vol. 34, No. 3, pp. 229-237, 2002.
[39] X. Liu, F. Ahmad, K. Yamazaki and M. Mori, “Adaptive interpolation scheme for NURBS curves with the integration of machining dynamics”, International Journal of Machine Tools & Manufacture, Vol. 45, No. 4-5, pp. 433-444, 2005.
[40] G. Barequet and M. Sharir, “Filling gaps in the boundary of a polyhedron”, Computer Aided Geometric Design, Vol. 12, No. 2, pp.207-229, 1995.
[41] W. H. Press, B. P. Flannery, S. A. Teukolsky and W. T. Vetterling, Numerical recipes in C: the art of scientific computing, the 2nd Edition, Cambridge University Press, 1992.
[42] L. A. Piegl and W. Tiller, “The NURBS book”, the 2nd Edition, Springer-Verlag, 1997.
[43] 張真誠、蔡文輝、胡育誠,資料結構導論—C語言實作,全華科技圖書股份有限公司,民國九十二年。
[44] 賴景義、翁文德,逆向工程理論與應用,全華科技圖書股份有限公司,民國九十三年。
[45] 章明、姚宏宗、鄭正元、林宸生、姚文隆,逆向工程技術與系統,全華科技圖書股份有限公司,民國九十四年。
|