參考文獻 |
[1] L. A. Zadeh, “Outline of a new approach to the analysis of complex systems and decision processes,” IEEE Trans. Syst. Man Cybern., vol. SMC-3, no. 1, pp. 28–44, Jan. 1973.
[2] M. Baloh and M. Parent, “Modeling and model verification of an intelligent self-balancing two-wheeled vehicle for an autonomous urban transportation system,” in Proc. Conf. Comput. Intell. Robot. Auton. Syst., Singapore, Dec. 2003.
[3] C.-H. Chiu, “The design and implementation of a wheeled inverted pendulum using an adaptive output recurrent cerebellar model articulation controller,” IEEE Trans. Ind. Electron., vol. 57, no. 5, pp. 1814–1822, May 2010.
[4] M. Fiacchini, A. Viguria, R. Cano, A. Prieto, F. R. Rubio, J. Aracil, and C. Canudas-de-Wit, “Design and experimentation of a personal pendulum vehicle,” in Proc. 7th Portuguese Conf. Autom. Control, Portugal, Sep. 2006.
[5] F. Grasser, A. D’Arrigo, S. Colombi, and A. C. Rufer, “JOE: a mobile, inverted pendulum,” IEEE Trans. Ind. Electron., vol. 49, no. 1, pp. 107–114, Feb. 2002.
[6] Y.-S. Ha and S. Yuta, “Trajectory tracking control for navigation of the inverse pendulum type self-contained mobile robot,” Robot. Auton. Syst., vol. 17, pp. 65–80, 1996.
[7] T. Takei, R. Imamura, and S. Yuta, “Baggage transportation and navigation by a wheeled inverted pendulum mobile robot,” IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 3985–3994, Oct. 2009.
[8] S. Jeong and T. Takahashi, “Wheeled inverted pendulum type assistant robot: design concept and mobile control,” Intell. Serv. Robot., vol. 1, no. 4, pp. 313–320, May 2008.
[9] S. Jung and S. S. Kim, “Control experiment of a wheel-driven mobile inverted pendulum using neural network,” IEEE Trans. Control Syst., vol. 16, no. 2, pp. 297–303, Mar. 2008.
[10] M. A. Karkoub, “Modelling and robust μ-synthesis control of an intelligent self balancing two-wheel vehicle,” Proc. Inst. Mech. Eng. Part K-J. Multi-Body Dyn., vol. 220, no. 4, pp. 293–302, Dec. 2006.
[11] Y. Kim, S. H. Kim, and Y. K. Kwak, “Dynamic analysis of a nonholonomic two-wheeled inverted pendulum robot,” J. Intell. Robot. Syst., vol. 44, no. 1, pp. 25–46, Sep. 2005.
[12] Y. Kim, S. H. Kim, and Y. K. Kwak, “Improving driving ability for a two-wheeled inverted-pendulum-type autonomous vehicle,” Proc. Inst. Mech. Eng. Part D-J. Automob. Eng., vol. 220, no. 2, pp. 165–175, Feb. 2006.
[13] Z. Li and J. Luo, “Adaptive robust dynamic balance and motion controls of mobile wheeled inverted pendulums,” IEEE Trans. Control Syst. Technol., vol. 17, no. 1, pp. 233–241, Jan. 2009.
[14] S. W. Nawawi, M. N. Ahmad, and J. H. S. Osman, “Real-time control of a two-wheeled inverted pendulum mobile robot,” in Proc. World Acad. Sci. Eng. Technol., May 2008, vol. 29, pp. 214–220.
[15] K. Pathak, J. Franch, and S. K. Agrawal, “Velocity and position control of a wheeled inverted pendulum by partial feedback linearization,” IEEE Trans. Robot., vol. 21, no. 3, pp. 505–513, Jun. 2005.
[16] A. Salerno and J. Angeles, “A new family of two-wheeled mobile robots: modeling and controllability,” IEEE Trans. Robot., vol. 23, no. 1, pp. 169–173, Feb. 2007.
[17] C.-C. Tsai, H.-C. Huang, and S.-C. Lin, “Adaptive neural network control of a self-balancing two-wheeled scooter,” IEEE Trans. Ind. Electron., vol. 57, no. 4, pp. 1420–1428, Apr. 2010.
[18] T. S. Hall and J. O. Hamblen, “System-on-a-programmable-chip development platforms in the classroom,” IEEE Trans. Educ., vol. 47, no. 4, pp. 502–507, Nov. 2004.
[19] H.-C. Huang and C.-C. Tsai, “FPGA implementation of an embedded robust adaptive controller for autonomous omnidirectional mobile platform,” IEEE Trans. Ind. Electron., vol. 56, no. 5, pp. 1604–1616, May 2009.
[20] S. Jung and S. s. Kim, “Hardware implementation of a real-time neural network controller with a DSP and an FPGA for nonlinear systems,” IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 265–271, Feb. 2007.
[21] Y.-S. Kung, R.-F. Fung, and T.-Y. Tai, “Realization of a motion control IC for X-Y table based on novel FPGA technology,” IEEE Trans. Ind. Electron., vol. 56, no. 1, pp. 43–53, Jan. 2009.
[22] T.-H. S. Li, S.-J. Chang, and Y.-X. Chen, “Implementation of human-like driving skills by autonomous fuzzy behavior control on an FPGA-based car-like mobile robot,” IEEE Trans. Ind. Electron., vol. 50, no. 5, pp. 867–880, Oct. 2003.
[23] T.-H. S. Li, Y.-C. Yeh, J.-D. Wu, M.-Y. Hsiao, and C.-Y. Chen, “Multifunctional intelligent autonomous parking controllers for carlike mobile robots,” IEEE Trans. Ind. Electron., vol. 57, no. 5, pp. 1687–1700, May 2010.
[24] S. Sanchez-Solano, A. J. Cabrera, I. Baturone, F. J. Moreno-Velo, and M. Brox, “FPGA implementation of embedded fuzzy controllers for robotic applications,” IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1937–1945, Aug. 2007.
[25] H. Tanaka, K. Ohnishi, H. Nishi, T. Kawai, Y. Morikawa, S. Ozawa, and T. Furukawa, “Implementation of bilateral control system based on acceleration control using FPGA for multi-DOF haptic endoscopic surgery robot,” IEEE Trans. Ind. Electron., vol. 56, no. 3, pp. 618–627, Mar. 2009.
[26] K. Furuta, K. Kosuge, and N. Mukai, “Control of articulated robot arm with sensory feedback: Laser beam tracking system,” IEEE Trans. Ind. Electron., vol. 35, no. 1, pp. 31–39, Feb. 1988.
[27] R. B. White, R. K. Read, M. W. Koch, and R. J. Schilling, “A graphics simulator for a robot arm,” IEEE Trans. Educ., vol. 32, no. 4, pp. 417–429, Nov. 1989.
[28] S. R. Munashnghe, M. Nakamura, S. Goto, and N. Kyura, “Optimum contouring of industrial robot arms under assigned velocity and torque constraints,” IEEE Trans. Syst. Man Cybern. Part C-Appl. Rev., vol. 31, no. 2, pp. 159–167, May 2001.
[29] C. W. Kennedy and J. P. Desai, “Modeling and control of the Mitsubishi PA-10 robot arm harmonic drive system,” IEEE-ASME Trans. Mechatron., vol. 10, no. 3, pp. 263–274, Jun. 2005.
[30] M. O. Efe, “Fractional fuzzy adaptive sliding-mode control of a 2-DOF direct-drive robot arm,” IEEE Trans. Syst. Man Cybern. Part B-Cyben., vol. 38, no. 6, pp. 1561–1570, Dec. 2008.
[31] W. Shen, J. Gu, and E. E. Milios, “Self-configuration fuzzy system for inverse kinematics of robot manipulators,” in Proc. NAFIPS Annu. meeting N. Am., Montreal, QC, Canada, Jun. 2006, pp. 41–45.
[32] V. Feliu, J. A. Somolinos, and A. Garcia, “Inverse dynamics based control system for a three-degree-freedom flexible arm,” IEEE Trans. Robot. Autom., vol. 19, no. 6, pp. 1007–1014, Dec. 2003.
[33] G. Antonelli, S. Chiaverini, and G. Fusco, “A new on-line algorithm for inverse kinematics of robot manipulators ensuring path tracking capability under joint limits,” IEEE Trans. Robot. Autom., vol. 19, no. 1, pp. 162–167, Feb. 2003.
[34] M. Shimizu, H. Kakuya, W.-K. Yoon, K. Kitagaki, and K. Kosuge, “Analytical inverse kinematics computation for 7-DOF redundant manipulators with joint limits and its application to redundancy resolution,” IEEE Trans. Robot., vol. 24, no. 5, pp. 1131–1142, Oct. 2008.
[35] K. Tchoń, “Optimal extended Jacobian inverse kinematics algorithms for robotic manipulators,” IEEE Trans. Robot., vol. 24, no. 6, pp. 1440–1445, Dec. 2008.
[36] W.-J. Wang, C.-H. Huang, I.-H. Lai, and H.-C. Chen, “A robot arm for pushing elevator buttons,” in Proc. SICE Annu. Conf., Taipei, Taiwan, Aug. 2010, pp. 1844–1848.
[37] A. Nilsson and P. Holmberg, “Combining a stable 2-D vision camera and an ultrasonic range detector for 3-D position estimation,” IEEE Trans. Instrum. Meas., vol. 43, no. 2, pp. 272–276, Apr. 1994.
[38] J.-Y. Baek and M.-C. Lee, “A study on detecting elevator entrance door using stereo vision in multi floor environment,” in Proc. ICROS-SICE Int. Joint Conf., Fukuoka, Japan, Aug. 2009, pp. 1370–1373.
[39] K. Okada, M. Kojima, S. Tokutsu, T. Maki, Y. Mori, and M. Inaba, “Multi-cue 3D object recognition in knowledge-based vision-guided humanoid robot system,” in Proc. IEEE/RSJ Int. Conf. Intell. Robot. Syst., San Diego, CA, USA, Oct. 2007, pp. 3217–3222.
[40] C. S. Fraser and S. Cronk, “A hybrid measurement approach for close-range photogrammetry,” ISPRS J. Photogramm. Remote Sens., vol. 64, no. 3, pp. 328–333, May 2009.
[41] F. A. van den Heuvel, “3D reconstruction from a single image using geometric constraints,” ISPRS J. Photogramm. Remote Sens., vol. 53, no. 6, pp. 354–368, Dec. 1998.
[42] D.-H. Zhang, J. Liang, and C. Guo, “Photogrammetric 3D measurement method applying to automobile panel,” in Proc. 2nd Int. Conf. Comput. Automat. Eng. (ICCAE), Feb. 2010, pp. 70–74.
[43] Z.-W. Gao, W.-K. Lin, Y.-S. Shen, C.-Y. Lin, and W.-C. Kao, “Design of signal processing pipeline for stereoscopic cameras,” IEEE Trans. Consum. Ellectron., vol. 56, no. 2, pp. 324–3331, May 2010.
[44] T. Egami, S. Oe, K. Terada, and T. Kashiwagi, “Three dimensional measurement using color image and movable CCD system,” in Proc. 27th Annu. Conf. IEEE Ind. Electron. Soc., Denver, CO, USA, Nov. 2001, pp. 1932–1936.
[45] C.-C. Hsu, M.-C. Lu, W.-Y. Wang, and Y.-Y. Lu, “Three-dimensional measurement of distant objects based on laser-projected CCD images,” IET Sci. Meas. Technol., vol. 3, no. 3, pp. 197–207, May 2009.
[46] C.-C. Hsu, M.-C. Lu, W.-Y. Wang, and Y.-Y. Lu, “Distance measurement based on pixel variation of CCD image,” ISA Trans., vol. 48, no. 4, pp. 389–395, Oct. 2009.
[47] C.-C. J. Hsu, M.-C. Lu, and Y.-Y. Lu, “Distance and angle measurement of objects on an oblique plane based on pixel number variation of CCD images,” IEEE Trans. Instrum. Meas., vol. 60, no. 5, pp. 1779–1794, May 2011.
[48] S. Das and N. Ahuja, “A comparative study of stereo, vergence, and focus as depth cues for active vision,” in Proc. IEEE Comput. Soc. Conf. Comput. Vis. Pattern Recognit. (CVPR ‘93), Jun. 1993, pp. 194–199.
[49] J. J. Aguilar, F, Torres, and M. A. Lope, “Stereo vision for 3D measurement: accuracy analysis, calibration and industrial applications,” Measurement, vol. 18, no. 4, pp. 193–200, Aug. 1996.
[50] E. Kim and H. Lee, “New approaches to relaxed quadratic stability condition of fuzzy control systems,” IEEE Trans. Fuzzy Syst., vol. 8, no. 5, pp. 523–534, Oct. 2000.
[51] K. Tanaka and H. O. Wang, Fuzzy Control Systems Design and Analysis: A Linear Matrix Inequality Approach. New York: Wiley, 2001.
[52] T.-H. S. Li, S.-J. Chang, and W. Tong, “Fuzzy target tracking control of autonomous mobile robots by using infrared sensors,” IEEE Trans. Fuzzy Syst., vol. 12, no. 4, pp. 491–501, Aug. 2004.
[53] C.-Y. Chang, “Adaptive fuzzy controller of the overhead cranes with nonlinear disturbance,” IEEE Trans. Ind. Inform., vol. 3, no. 2, pp. 164–172, May 2007.
[54] L. Sciavicco and B. Siciliano, Modelling and Control of Robot Manipulators. London: Springer, 2000.
[55] G. Welch and G. Bishop, An introduction to the Kalman filter. Chapel Hill, NC: Dept. Comput. Sci., Univ. North Carolina at Chapel Hill.
|